2.7.1.3. Luma-Only Formats¶
This family of formats only store the luma component of a Y'CbCr image. They are often referred to as greyscale formats.
Note
In all the tables that follow, bit 7 is the most significant bit in a byte.
Formats are described with the minimum number of pixels needed to create a byte-aligned repeating pattern. ... indicates repetition of the pattern.
Y'x[9:2] denotes bits 9 to 2 of the Y' value for pixel at column x.
0 denotes padding bits set to 0.
Identifier  | 
Code  | 
Byte 0  | 
Byte 1  | 
Byte 2  | 
Byte 3  | 
Byte 4  | 
|---|---|---|---|---|---|---|
  | 
'GREY'  | 
Y'0[7:0]  | 
...  | 
...  | 
...  | 
...  | 
  | 
'ip3y'  | 
Y'0[7:0]  | 
Y'1[5:0] Y'0[9:8]  | 
Y'2[3:0] Y'1[9:6]  | 
Y'3[1:0] Y'2[9:4]  | 
Y'3[9:2]  | 
  | 
'Y10 '  | 
Y'0[7:0]  | 
000000 Y'0[9:8]  | 
...  | 
...  | 
...  | 
  | 
'Y10B'  | 
Y'0[9:2]  | 
Y'0[1:0] Y'1[9:4]  | 
Y'1[3:0] Y'2[9:6]  | 
Y'2[5:0] Y'3[9:8]  | 
Y'3[7:0]  | 
  | 
'Y10P'  | 
Y'0[9:2]  | 
Y'1[9:2]  | 
Y'2[9:2]  | 
Y'3[9:2]  | 
Y'3[1:0] Y'2[1:0] Y'1[1:0] Y'0[1:0]  | 
  | 
'Y12 '  | 
Y'0[7:0]  | 
0000 Y'0[11:8]  | 
...  | 
...  | 
...  | 
  | 
'Y012'  | 
Y'0[3:0] 0000  | 
Y'0[11:4]  | 
...  | 
...  | 
...  | 
  | 
'Y14 '  | 
Y'0[7:0]  | 
00 Y'0[13:8]  | 
...  | 
...  | 
...  | 
  | 
'Y16 '  | 
Y'0[7:0]  | 
Y'0[15:8]  | 
...  | 
...  | 
...  | 
  | 
'Y16 ' | (1U << 31)  | 
Y'0[15:8]  | 
Y'0[7:0]  | 
...  | 
...  | 
...  | 
Note
For the Y16 and Y16_BE formats, the actual sampling precision may be lower than 16 bits. For example, 10 bits per pixel uses values in the range 0 to 1023. For the IPU3_Y10 format 25 pixels are packed into 32 bytes, which leaves the 6 most significant bits of the last byte padded with 0.
For Y012 and Y12 formats, Y012 places its data in the 12 high bits, with padding zeros in the 4 low bits, in contrast to the Y12 format, which has its padding located in the most significant bits of the 16 bit word.