Kernel driver cgbc-hwmon¶
Supported chips:
Congatec Board Controller.
Prefix: ‘cgbc-hwmon’
Author: Thomas Richard <thomas.richard@bootlin.com>
Description¶
This driver enables monitoring support for the Congatec Board Controller. This controller is embedded on the x86 SoMs of Congatec.
Sysfs entries¶
The following sysfs entries list contains all sensors defined in the Board Controller. The available sensors in sysfs depend on the SoM and the system.
Name |
Description |
|---|---|
temp1_input |
CPU temperature |
temp2_input |
Case temperature |
temp3_input |
Ambient temperature |
temp4_input |
CPU Board temperature |
temp5_input |
Carrier Board temperature |
temp6_input |
System Chipset temperature |
temp7_input |
Video Controller/Board temperature |
temp8_input |
Other temperature |
temp9_input |
Top DIMM 0 temperature |
temp10_input |
Bottom DIMM 0 temperature |
temp11_input |
Alternate Board temperature |
temp12_input |
Top DIMM 1 temperature |
temp13_input |
Top DIMM 2 temperature |
temp14_input |
Top DIMM 3 temperature |
temp15_input |
Top DIMM 4 temperature |
temp16_input |
Top DIMM 5 temperature |
temp17_input |
Top DIMM 6 temperature |
temp18_input |
Top DIMM 7 temperature |
temp19_input |
Bottom DIMM 1 temperature |
in0_input |
CPU Core voltage |
in1_input |
DC Runtime voltage |
in2_input |
DC Standby voltage |
in3_input |
CMOS Battery voltage |
in4_input |
Battery Supply voltage |
in5_input |
AC voltage |
in6_input |
Other voltage |
in7_input |
5V Runtime voltage |
in8_input |
5V Standby voltage |
in9_input |
3V3 Runtime voltage |
in10_input |
3V3 Standby voltage |
in11_input |
VCore A voltage |
in12_input |
VCore B voltage |
in13_input |
12V Runtime voltage |
in14_input |
12V Standby voltage |
curr1_input |
DC Runtime current |
curr2_input |
5V Runtime current |
curr3_input |
12V Runtime current |
fan1_input |
CPU fan |
fan2_input |
Case fan |
fan3_input |
Ambient fan |
fan4_input |
Chiptset fan |
fan5_input |
Video fan |
fan6_input |
Other fan |