UAPI¶

The sources associated with this section can be found in pvr_drm.h.

The PowerVR IOCTL argument structs have a few limitations in place, in addition to the standard kernel restrictions:

All members must be type-aligned.

The overall struct must be padded to 64-bit alignment.

Explicit padding is almost always required. This takes the form of _padding_[x] members of sufficient size to pad to the next power-of-two alignment, where [x] is the offset into the struct in hexadecimal. Arrays are never used for alignment. Padding fields must be zeroed; this is always checked.

Unions may only appear as the last member of a struct.

Individual union members may grow in the future. The space between the end of a union member and the end of its containing union is considered “implicit padding” and must be zeroed. This is always checked.

In addition to the IOCTL argument structs, the PowerVR UAPI makes use of DEV_QUERY argument structs. These are used to fetch information about the device and runtime. These structs are subject to the same rules set out above.

OBJECT ARRAYS¶

struct drm_pvr_obj_array¶: Container used to pass arrays of objects

Definition:

struct drm_pvr_obj_array {
    __u32 stride;
    __u32 count;
    __u64 array;
};

Members

stride: Stride of object struct. Used for versioning.
count: Number of objects in the array.
array: User pointer to an array of objects.

Description

It is not unusual to have to extend objects to pass new parameters, and the DRM ioctl infrastructure is supporting that by padding ioctl arguments with zeros when the data passed by userspace is smaller than the struct defined in the drm_ioctl_desc, thus keeping things backward compatible. This type is just applying the same concepts to indirect objects passed through arrays referenced from the main ioctl arguments structure: the stride basically defines the size of the object passed by userspace, which allows the kernel driver to pad with zeros when it’s smaller than the size of the object it expects.

Use DRM_PVR_OBJ_ARRAY() to fill object array fields, unless you have a very good reason not to.

DRM_PVR_OBJ_ARRAY¶

DRM_PVR_OBJ_ARRAY (cnt, ptr)

Helper macro for filling struct drm_pvr_obj_array.

Parameters

cnt: Number of elements pointed to py ptr.
ptr: Pointer to start of a C array.

Return

Literal of type struct drm_pvr_obj_array.

IOCTLS¶

PVR_IOCTL¶

PVR_IOCTL (_ioctl, _mode, _data)

Build a PowerVR IOCTL number

Parameters

_ioctl: An incrementing id for this IOCTL. Added to DRM_COMMAND_BASE.
_mode: Must be one of DRM_IOR, DRM_IOW or DRM_IOWR.
_data: The type of the args struct passed by this IOCTL.

Description

The struct referred to by _data must have a drm_pvr_ioctl_ prefix and an _args suffix. They are therefore omitted from _data.

This should only be used to build the constants described below; it should never be used to call an IOCTL directly.

Return

An IOCTL number to be passed to ioctl() from userspace.

DEV_QUERY¶

enum drm_pvr_dev_query¶: For use with drm_pvr_ioctl_dev_query_args.type to indicate the type of the receiving container.

Constants

DRM_PVR_DEV_QUERY_GPU_INFO_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_gpu_info.
DRM_PVR_DEV_QUERY_RUNTIME_INFO_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_runtime_info.
DRM_PVR_DEV_QUERY_QUIRKS_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_quirks.
DRM_PVR_DEV_QUERY_ENHANCEMENTS_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_enhancements.
DRM_PVR_DEV_QUERY_HEAP_INFO_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_heap_info.
DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET: The dev query args contain a pointer to struct drm_pvr_dev_query_static_data_areas.

Description

Append only. Do not reorder.

struct drm_pvr_ioctl_dev_query_args¶: Arguments for DRM_IOCTL_PVR_DEV_QUERY.

Definition:

struct drm_pvr_ioctl_dev_query_args {
    __u32 type;
    __u32 size;
    __u64 pointer;
};

Members

type

Type of query and output struct. See enum drm_pvr_dev_query.

size

Size of the receiving struct, see type.

After a successful call this will be updated to the written byte length. Can also be used to get the minimum byte length (see pointer). This allows additional fields to be appended to the structs in future.

pointer

Pointer to struct type.

Must be large enough to contain size bytes. If pointer is NULL, the expected size will be returned in the size field, but no other data will be written.

struct drm_pvr_dev_query_gpu_info¶: Container used to fetch information about the graphics processor.

Definition:

struct drm_pvr_dev_query_gpu_info {
    __u64 gpu_id;
    __u32 num_phantoms;
    __u32 _padding_c;
};

Members

gpu_id

GPU identifier.

For all currently supported GPUs this is the BVNC encoded as a 64-bit value as follows:

63..48

47..32

31..16

15..0

B

V

N

C

num_phantoms

Number of Phantoms present.

_padding_c

Reserved. This field must be zeroed.

Description

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_QUERY_GPU_INFO_GET.

struct drm_pvr_dev_query_runtime_info¶: Container used to fetch information about the graphics runtime.

Definition:

struct drm_pvr_dev_query_runtime_info {
    __u64 free_list_min_pages;
    __u64 free_list_max_pages;
    __u32 common_store_alloc_region_size;
    __u32 common_store_partition_space_size;
    __u32 max_coeffs;
    __u32 cdm_max_local_mem_size_regs;
};

Members

free_list_min_pages: Minimum allowed free list size, in PM physical pages.
free_list_max_pages: Maximum allowed free list size, in PM physical pages.
common_store_alloc_region_size: Size of the Allocation Region within the Common Store used for coefficient and shared registers, in dwords.
common_store_partition_space_size: Size of the Partition Space within the Common Store for output buffers, in dwords.
max_coeffs: Maximum coefficients, in dwords.
cdm_max_local_mem_size_regs: Maximum amount of local memory available to a compute kernel, in dwords.

Description

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_QUERY_RUNTIME_INFO_GET.

struct drm_pvr_dev_query_quirks¶: Container used to fetch information about hardware fixes for which the device may require support in the user mode driver.

Definition:

struct drm_pvr_dev_query_quirks {
    __u64 quirks;
    __u16 count;
    __u16 musthave_count;
    __u32 _padding_c;
};

Members

quirks

A userspace address for the hardware quirks __u32 array.

The first musthave_count items in the list are quirks that the client must support for this device. If userspace does not support all these quirks then functionality is not guaranteed and client initialisation must fail. The remaining quirks in the list affect userspace and the kernel or firmware. They are disabled by default and require userspace to opt-in. The opt-in mechanism depends on the quirk.

count

Length of quirks (number of __u32).

musthave_count

The number of entries in quirks that are mandatory, starting at index 0.

_padding_c

Reserved. This field must be zeroed.

Description

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_QUERY_QUIRKS_GET.

struct drm_pvr_dev_query_enhancements¶: Container used to fetch information about optional enhancements supported by the device that require support in the user mode driver.

Definition:

struct drm_pvr_dev_query_enhancements {
    __u64 enhancements;
    __u16 count;
    __u16 _padding_a;
    __u32 _padding_c;
};

Members

enhancements

A userspace address for the hardware enhancements __u32 array.

These enhancements affect userspace and the kernel or firmware. They are disabled by default and require userspace to opt-in. The opt-in mechanism depends on the enhancement.

count

Length of enhancements (number of __u32).

_padding_a

Reserved. This field must be zeroed.

_padding_c

Reserved. This field must be zeroed.

Description

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_ENHANCEMENTS_GET.

enum drm_pvr_heap_id¶: Array index for heap info data returned by DRM_PVR_DEV_QUERY_HEAP_INFO_GET.

Constants

DRM_PVR_HEAP_GENERAL

General purpose heap.

DRM_PVR_HEAP_PDS_CODE_DATA

PDS code and data heap.

DRM_PVR_HEAP_USC_CODE

USC code heap.

DRM_PVR_HEAP_RGNHDR

Region header heap. Only used if GPU has BRN63142.

DRM_PVR_HEAP_VIS_TEST

Visibility test heap.

DRM_PVR_HEAP_TRANSFER_FRAG

Transfer fragment heap.

DRM_PVR_HEAP_COUNT

The number of heaps returned by DRM_PVR_DEV_QUERY_HEAP_INFO_GET.

More heaps may be added, so this also serves as the copy limit when sent by the caller.

Description

For compatibility reasons all indices will be present in the returned array, however some heaps may not be present. These are indicated where struct drm_pvr_heap.size is set to zero.

struct drm_pvr_heap¶: Container holding information about a single heap.

Definition:

struct drm_pvr_heap {
    __u64 base;
    __u64 size;
    __u32 flags;
    __u32 page_size_log2;
};

Members

base: Base address of heap.
size: Size of heap, in bytes. Will be 0 if the heap is not present.
flags: Flags for this heap. Currently always 0.
page_size_log2: Log2 of page size.

Description

This will always be fetched as an array.

struct drm_pvr_dev_query_heap_info¶: Container used to fetch information about heaps supported by the device driver.

Definition:

struct drm_pvr_dev_query_heap_info {
    struct drm_pvr_obj_array heaps;
};

Members

heaps: Array of struct drm_pvr_heap. If pointer is NULL, the count and stride will be updated with those known to the driver version, to facilitate allocation by the caller.

Description

Please note all driver-supported heaps will be returned up to heaps.count. Some heaps will not be present in all devices, which will be indicated by struct drm_pvr_heap.size being set to zero.

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_QUERY_HEAP_INFO_GET.

enum drm_pvr_static_data_area_usage¶: Array index for static data area info returned by DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET.

Constants

DRM_PVR_STATIC_DATA_AREA_EOT

End of Tile PDS program code segment.

The End of Tile PDS task runs at completion of a tile during a fragment job, and is responsible for emitting the tile to the Pixel Back End.

DRM_PVR_STATIC_DATA_AREA_FENCE

MCU fence area, used during cache flush and invalidation.

This must point to valid physical memory but the contents otherwise are not used.

DRM_PVR_STATIC_DATA_AREA_VDM_SYNC

VDM sync program.

The VDM sync program is used to synchronise multiple areas of the GPU hardware.

DRM_PVR_STATIC_DATA_AREA_YUV_CSC

YUV coefficients.

Area contains up to 16 slots with stride of 64 bytes. Each is a 3x4 matrix of u16 fixed point numbers, with 1 sign bit, 2 integer bits and 13 fractional bits.

The slots are : 0 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_RGB_IDENTITY_KHR 1 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_IDENTITY_KHR (full range) 2 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_IDENTITY_KHR (conformant range) 3 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (full range) 4 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (conformant range) 5 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (full range) 6 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (conformant range) 7 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (full range) 8 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (conformant range) 9 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (conformant range, 10 bit) 10 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (conformant range, 10 bit) 11 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (conformant range, 10 bit) 14 = Identity (biased) 15 = Identity

Description

For compatibility reasons all indices will be present in the returned array, however some areas may not be present. These are indicated where struct drm_pvr_static_data_area.size is set to zero.

struct drm_pvr_static_data_area¶: Container holding information about a single static data area.

Definition:

struct drm_pvr_static_data_area {
    __u16 area_usage;
    __u16 location_heap_id;
    __u32 size;
    __u64 offset;
};

Members

area_usage: Usage of static data area. See enum drm_pvr_static_data_area_usage.
location_heap_id: Array index of heap where this of static data area is located. This array is fetched using DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
size: Size of static data area. Not present if set to zero.
offset: Offset of static data area from start of heap.

Description

This will always be fetched as an array.

struct drm_pvr_dev_query_static_data_areas¶: Container used to fetch information about the static data areas in heaps supported by the device driver.

Definition:

struct drm_pvr_dev_query_static_data_areas {
    struct drm_pvr_obj_array static_data_areas;
};

Members

static_data_areas: Array of struct drm_pvr_static_data_area. If pointer is NULL, the count and stride will be updated with those known to the driver version, to facilitate allocation by the caller.

Description

Please note all driver-supported static data areas will be returned up to static_data_areas.count. Some will not be present for all devices which, will be indicated by struct drm_pvr_static_data_area.size being set to zero.

Further, some heaps will not be present either. See struct drm_pvr_dev_query_heap_info.

When fetching this type struct drm_pvr_ioctl_dev_query_args.type must be set to DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET.

CREATE_BO¶

struct drm_pvr_ioctl_create_bo_args¶: Arguments for DRM_IOCTL_PVR_CREATE_BO

Definition:

struct drm_pvr_ioctl_create_bo_args {
    __u64 size;
    __u32 handle;
    __u32 _padding_c;
    __u64 flags;
};

Members

size: [IN] Size of buffer object to create. This must be page size aligned.
handle: [OUT] GEM handle of the new buffer object for use in userspace.
_padding_c: Reserved. This field must be zeroed.
flags: [IN] Options which will affect the behaviour of this creation operation and future mapping operations on the created object. This field must be a valid combination of DRM_PVR_BO_* values, with all bits marked as reserved set to zero.

We use “device” to refer to the GPU here because of the ambiguity between CPU and GPU in some fonts.

Device mapping options

DRM_PVR_BO_BYPASS_DEVICE_CACHE: Specify that device accesses to this memory will bypass the cache. This is used for buffers that will either be regularly updated by the CPU (eg free lists) or will be accessed only once and therefore isn’t worth caching (eg partial render buffers). By default, the device flushes its memory caches after every job, so this is not normally required for coherency.
DRM_PVR_BO_PM_FW_PROTECT: Specify that only the Parameter Manager (PM) and/or firmware processor should be allowed to access this memory when mapped to the device. It is not valid to specify this flag with DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS.

CPU mapping options

DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS: Allow userspace to map and access the contents of this memory. It is not valid to specify this flag with DRM_PVR_BO_PM_FW_PROTECT.

GET_BO_MMAP_OFFSET¶

struct drm_pvr_ioctl_get_bo_mmap_offset_args¶: Arguments for DRM_IOCTL_PVR_GET_BO_MMAP_OFFSET

Definition:

struct drm_pvr_ioctl_get_bo_mmap_offset_args {
    __u32 handle;
    __u32 _padding_4;
    __u64 offset;
};

Members

handle: [IN] GEM handle of the buffer object to be mapped.
_padding_4: Reserved. This field must be zeroed.
offset: [OUT] Fake offset to use in the real mmap call.

Description

Like other DRM drivers, the “mmap” IOCTL doesn’t actually map any memory. Instead, it allocates a fake offset which refers to the specified buffer object. This offset can be used with a real mmap call on the DRM device itself.

CREATE_VM_CONTEXT and DESTROY_VM_CONTEXT¶

struct drm_pvr_ioctl_create_vm_context_args¶: Arguments for DRM_IOCTL_PVR_CREATE_VM_CONTEXT

Definition:

struct drm_pvr_ioctl_create_vm_context_args {
    __u32 handle;
    __u32 _padding_4;
};

Members

handle: [OUT] Handle for new VM context.
_padding_4: Reserved. This field must be zeroed.

struct drm_pvr_ioctl_destroy_vm_context_args¶: Arguments for DRM_IOCTL_PVR_DESTROY_VM_CONTEXT

Definition:

struct drm_pvr_ioctl_destroy_vm_context_args {
    __u32 handle;
    __u32 _padding_4;
};

Members

handle: [IN] Handle for VM context to be destroyed.
_padding_4: Reserved. This field must be zeroed.

VM_MAP and VM_UNMAP¶

The VM UAPI allows userspace to create buffer object mappings in GPU virtual address space.

The client is responsible for managing GPU address space. It should allocate mappings within the heaps returned by DRM_PVR_DEV_QUERY_HEAP_INFO_GET.

DRM_IOCTL_PVR_VM_MAP creates a new mapping. The client provides the target virtual address for the mapping. Size and offset within the mapped buffer object can be specified, so the client can partially map a buffer.

DRM_IOCTL_PVR_VM_UNMAP removes a mapping. The entire mapping will be removed from GPU address space only if the size of the mapping matches that known to the driver.

struct drm_pvr_ioctl_vm_map_args¶: Arguments for DRM_IOCTL_PVR_VM_MAP.

Definition:

struct drm_pvr_ioctl_vm_map_args {
    __u32 vm_context_handle;
    __u32 flags;
    __u64 device_addr;
    __u32 handle;
    __u32 _padding_14;
    __u64 offset;
    __u64 size;
};

Members

vm_context_handle: [IN] Handle for VM context for this mapping to exist in.
flags: [IN] Flags which affect this mapping. Currently always 0.
device_addr: [IN] Requested device-virtual address for the mapping. This must be non-zero and aligned to the device page size for the heap containing the requested address. It is an error to specify an address which is not contained within one of the heaps returned by DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
handle: [IN] Handle of the target buffer object. This must be a valid handle returned by DRM_IOCTL_PVR_CREATE_BO.
_padding_14: Reserved. This field must be zeroed.
offset: [IN] Offset into the target bo from which to begin the mapping.
size: [IN] Size of the requested mapping. Must be aligned to the device page size for the heap containing the requested address, as well as the host page size. When added to device_addr, the result must not overflow the heap which contains device_addr (i.e. the range specified by device_addr and size must be completely contained within a single heap specified by DRM_PVR_DEV_QUERY_HEAP_INFO_GET).

struct drm_pvr_ioctl_vm_unmap_args¶: Arguments for DRM_IOCTL_PVR_VM_UNMAP.

Definition:

struct drm_pvr_ioctl_vm_unmap_args {
    __u32 vm_context_handle;
    __u32 _padding_4;
    __u64 device_addr;
    __u64 size;
};

Members

vm_context_handle: [IN] Handle for VM context that this mapping exists in.
_padding_4: Reserved. This field must be zeroed.
device_addr: [IN] Device-virtual address at the start of the target mapping. This must be non-zero.
size: Size in bytes of the target mapping. This must be non-zero.

CREATE_CONTEXT and DESTROY_CONTEXT¶

struct drm_pvr_ioctl_create_context_args¶: Arguments for DRM_IOCTL_PVR_CREATE_CONTEXT

Definition:

struct drm_pvr_ioctl_create_context_args {
    __u32 type;
    __u32 flags;
    __s32 priority;
    __u32 handle;
    __u64 static_context_state;
    __u32 static_context_state_len;
    __u32 vm_context_handle;
    __u64 callstack_addr;
};

Members

type

[IN] Type of context to create.

This must be one of the values defined by enum drm_pvr_ctx_type.

flags

[IN] Flags for context.

priority

[IN] Priority of new context.

This must be one of the values defined by enum drm_pvr_ctx_priority.

handle

[OUT] Handle for new context.

static_context_state

[IN] Pointer to static context state stream.

static_context_state_len

[IN] Length of static context state, in bytes.

vm_context_handle

[IN] Handle for VM context that this context is associated with.

callstack_addr

[IN] Address for initial call stack pointer. Only valid if type is DRM_PVR_CTX_TYPE_RENDER, otherwise must be 0.

enum drm_pvr_ctx_priority¶: Arguments for drm_pvr_ioctl_create_context_args.priority

Constants

DRM_PVR_CTX_PRIORITY_LOW: Priority below normal.
DRM_PVR_CTX_PRIORITY_NORMAL: Normal priority.
DRM_PVR_CTX_PRIORITY_HIGH: Priority above normal. Note this requires CAP_SYS_NICE or DRM_MASTER.

enum drm_pvr_ctx_type¶: Arguments for struct drm_pvr_ioctl_create_context_args.type

Constants

DRM_PVR_CTX_TYPE_RENDER: Render context.
DRM_PVR_CTX_TYPE_COMPUTE: Compute context.
DRM_PVR_CTX_TYPE_TRANSFER_FRAG: Transfer context for fragment data master.

struct drm_pvr_ioctl_destroy_context_args¶: Arguments for DRM_IOCTL_PVR_DESTROY_CONTEXT

Definition:

struct drm_pvr_ioctl_destroy_context_args {
    __u32 handle;
    __u32 _padding_4;
};

Members

handle: [IN] Handle for context to be destroyed.
_padding_4: Reserved. This field must be zeroed.

CREATE_FREE_LIST and DESTROY_FREE_LIST¶

struct drm_pvr_ioctl_create_free_list_args¶: Arguments for DRM_IOCTL_PVR_CREATE_FREE_LIST

Definition:

struct drm_pvr_ioctl_create_free_list_args {
    __u64 free_list_gpu_addr;
    __u32 initial_num_pages;
    __u32 max_num_pages;
    __u32 grow_num_pages;
    __u32 grow_threshold;
    __u32 vm_context_handle;
    __u32 handle;
};

Members

free_list_gpu_addr

[IN] Address of GPU mapping of buffer object containing memory to be used by free list.

The mapped region of the buffer object must be at least max_num_pages * sizeof(__u32).

The buffer object must have been created with DRM_PVR_BO_DEVICE_PM_FW_PROTECT set and DRM_PVR_BO_CPU_ALLOW_USERSPACE_ACCESS not set.

initial_num_pages

[IN] Pages initially allocated to free list.

max_num_pages

[IN] Maximum number of pages in free list.

grow_num_pages

[IN] Pages to grow free list by per request.

grow_threshold

[IN] Percentage of FL memory used that should trigger a new grow request.

vm_context_handle

[IN] Handle for VM context that the free list buffer object is mapped in.

handle

[OUT] Handle for created free list.

Description

Free list arguments have the following constraints :

max_num_pages must be greater than zero.
grow_threshold must be between 0 and 100.
grow_num_pages must be less than or equal to max_num_pages.
initial_num_pages, max_num_pages and grow_num_pages must be multiples of 4.
When grow_num_pages is 0, initial_num_pages must be equal to max_num_pages.
When grow_num_pages is non-zero, initial_num_pages must be less than max_num_pages.

struct drm_pvr_ioctl_destroy_free_list_args¶: Arguments for DRM_IOCTL_PVR_DESTROY_FREE_LIST

Definition:

struct drm_pvr_ioctl_destroy_free_list_args {
    __u32 handle;
    __u32 _padding_4;
};

Members

handle: [IN] Handle for free list to be destroyed.
_padding_4: Reserved. This field must be zeroed.

CREATE_HWRT_DATASET and DESTROY_HWRT_DATASET¶

struct drm_pvr_ioctl_create_hwrt_dataset_args¶: Arguments for DRM_IOCTL_PVR_CREATE_HWRT_DATASET

Definition:

struct drm_pvr_ioctl_create_hwrt_dataset_args {
    struct drm_pvr_create_hwrt_geom_data_args geom_data_args;
    struct drm_pvr_create_hwrt_rt_data_args rt_data_args[2];
    __u32 free_list_handles[2];
    __u32 width;
    __u32 height;
    __u32 samples;
    __u32 layers;
    __u32 isp_merge_lower_x;
    __u32 isp_merge_lower_y;
    __u32 isp_merge_scale_x;
    __u32 isp_merge_scale_y;
    __u32 isp_merge_upper_x;
    __u32 isp_merge_upper_y;
    __u32 region_header_size;
    __u32 handle;
};

Members

geom_data_args

[IN] Geometry data arguments.

rt_data_args

[IN] Array of render target arguments.

Each entry in this array represents a render target in a double buffered setup.

free_list_handles

[IN] Array of free list handles.

free_list_handles[PVR_DRM_HWRT_FREE_LIST_LOCAL] must have initial size of at least that reported by drm_pvr_dev_query_runtime_info.free_list_min_pages.

width

[IN] Width in pixels.

height

[IN] Height in pixels.

samples

[IN] Number of samples.

layers

[IN] Number of layers.

isp_merge_lower_x

[IN] Lower X coefficient for triangle merging.

isp_merge_lower_y

[IN] Lower Y coefficient for triangle merging.

isp_merge_scale_x

[IN] Scale X coefficient for triangle merging.

isp_merge_scale_y

[IN] Scale Y coefficient for triangle merging.

isp_merge_upper_x

[IN] Upper X coefficient for triangle merging.

isp_merge_upper_y

[IN] Upper Y coefficient for triangle merging.

region_header_size

[IN] Size of region header array. This common field is used by both render targets in this data set.

The units for this field differ depending on what version of the simple internal parameter format the device uses. If format 2 is in use then this is interpreted as the number of region headers. For other formats it is interpreted as the size in dwords.

handle

[OUT] Handle for created HWRT dataset.

struct drm_pvr_create_hwrt_geom_data_args¶: Geometry data arguments used for struct drm_pvr_ioctl_create_hwrt_dataset_args.geom_data_args.

Definition:

struct drm_pvr_create_hwrt_geom_data_args {
    __u64 tpc_dev_addr;
    __u32 tpc_size;
    __u32 tpc_stride;
    __u64 vheap_table_dev_addr;
    __u64 rtc_dev_addr;
};

Members

tpc_dev_addr: [IN] Tail pointer cache GPU virtual address.
tpc_size: [IN] Size of TPC, in bytes.
tpc_stride: [IN] Stride between layers in TPC, in pages
vheap_table_dev_addr: [IN] VHEAP table GPU virtual address.
rtc_dev_addr: [IN] Render Target Cache virtual address.

struct drm_pvr_create_hwrt_rt_data_args¶: Render target arguments used for struct drm_pvr_ioctl_create_hwrt_dataset_args.rt_data_args.

Definition:

struct drm_pvr_create_hwrt_rt_data_args {
    __u64 pm_mlist_dev_addr;
    __u64 macrotile_array_dev_addr;
    __u64 region_header_dev_addr;
};

Members

pm_mlist_dev_addr: [IN] PM MLIST GPU virtual address.
macrotile_array_dev_addr: [IN] Macrotile array GPU virtual address.
region_header_dev_addr: [IN] Region header array GPU virtual address.

struct drm_pvr_ioctl_destroy_hwrt_dataset_args¶: Arguments for DRM_IOCTL_PVR_DESTROY_HWRT_DATASET

Definition:

struct drm_pvr_ioctl_destroy_hwrt_dataset_args {
    __u32 handle;
    __u32 _padding_4;
};

Members

handle: [IN] Handle for HWRT dataset to be destroyed.
_padding_4: Reserved. This field must be zeroed.

SUBMIT_JOBS¶

DRM_PVR_SYNC_OP_HANDLE_TYPE_MASK¶: Handle type mask for the drm_pvr_sync_op::flags field.

DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_SYNCOBJ¶: Indicates the handle passed in drm_pvr_sync_op::handle is a syncobj handle. This is the default type.

DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_TIMELINE_SYNCOBJ¶: Indicates the handle passed in drm_pvr_sync_op::handle is a timeline syncobj handle.

DRM_PVR_SYNC_OP_FLAG_SIGNAL¶: Signal operation requested. The out-fence bound to the job will be attached to the syncobj whose handle is passed in drm_pvr_sync_op::handle.

DRM_PVR_SYNC_OP_FLAG_WAIT¶: Wait operation requested. The job will wait for this particular syncobj or syncobj point to be signaled before being started. This is the default operation.

struct drm_pvr_ioctl_submit_jobs_args¶: Arguments for DRM_IOCTL_PVR_SUBMIT_JOB

Definition:

struct drm_pvr_ioctl_submit_jobs_args {
    struct drm_pvr_obj_array jobs;
};

Members

jobs: [IN] Array of jobs to submit.

Description

If the syscall returns an error it is important to check the value of jobs.count. This indicates the index into jobs.array where the error occurred.

DRM_PVR_SUBMIT_JOB_GEOM_CMD_FIRST¶: Indicates if this the first command to be issued for a render.

DRM_PVR_SUBMIT_JOB_GEOM_CMD_LAST¶: Indicates if this the last command to be issued for a render.

DRM_PVR_SUBMIT_JOB_GEOM_CMD_SINGLE_CORE¶: Forces to use single core in a multi core device.

DRM_PVR_SUBMIT_JOB_GEOM_CMD_FLAGS_MASK¶: Logical OR of all the geometry cmd flags.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_SINGLE_CORE¶: Use single core in a multi core setup.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_DEPTHBUFFER¶: Indicates whether a depth buffer is present.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_STENCILBUFFER¶: Indicates whether a stencil buffer is present.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_PREVENT_CDM_OVERLAP¶: Disallow compute overlapped with this render.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_GET_VIS_RESULTS¶: Indicates whether this render produces visibility results.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_SCRATCHBUFFER¶: Indicates whether partial renders write to a scratch buffer instead of the final surface. It also forces the full screen copy expected to be present on the last render after all partial renders have completed.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE¶: Disable pixel merging for this render.

DRM_PVR_SUBMIT_JOB_FRAG_CMD_FLAGS_MASK¶: Logical OR of all the fragment cmd flags.

DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_PREVENT_ALL_OVERLAP¶: Disallow other jobs overlapped with this compute.

DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_SINGLE_CORE¶: Forces to use single core in a multi core device.

DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_FLAGS_MASK¶: Logical OR of all the compute cmd flags.

DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_SINGLE_CORE¶: Forces job to use a single core in a multi core device.

DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_FLAGS_MASK¶: Logical OR of all the transfer cmd flags.

struct drm_pvr_sync_op¶: Object describing a sync operation

Definition:

struct drm_pvr_sync_op {
    __u32 handle;
    __u32 flags;
    __u64 value;
};

Members

handle: Handle of sync object.
flags: Combination of DRM_PVR_SYNC_OP_FLAG_ flags.
value: Timeline value for this drm_syncobj. MBZ for a binary syncobj.

enum drm_pvr_job_type¶: Arguments for struct drm_pvr_job.job_type

Constants

DRM_PVR_JOB_TYPE_GEOMETRY: Job type is geometry.
DRM_PVR_JOB_TYPE_FRAGMENT: Job type is fragment.
DRM_PVR_JOB_TYPE_COMPUTE: Job type is compute.
DRM_PVR_JOB_TYPE_TRANSFER_FRAG: Job type is a fragment transfer.

struct drm_pvr_hwrt_data_ref¶: Reference HWRT data

Definition:

struct drm_pvr_hwrt_data_ref {
    __u32 set_handle;
    __u32 data_index;
};

Members

set_handle: HWRT data set handle.
data_index: Index of the HWRT data inside the data set.

struct drm_pvr_job¶: Job arguments passed to the DRM_IOCTL_PVR_SUBMIT_JOBS ioctl

Definition:

struct drm_pvr_job {
    __u32 type;
    __u32 context_handle;
    __u32 flags;
    __u32 cmd_stream_len;
    __u64 cmd_stream;
    struct drm_pvr_obj_array sync_ops;
    struct drm_pvr_hwrt_data_ref hwrt;
};

Members

type

[IN] Type of job being submitted

This must be one of the values defined by enum drm_pvr_job_type.

context_handle

[IN] Context handle.

When job_type is DRM_PVR_JOB_TYPE_RENDER, DRM_PVR_JOB_TYPE_COMPUTE or DRM_PVR_JOB_TYPE_TRANSFER_FRAG, this must be a valid handle returned by DRM_IOCTL_PVR_CREATE_CONTEXT. The type of context must be compatible with the type of job being submitted.

When job_type is DRM_PVR_JOB_TYPE_NULL, this must be zero.

flags

[IN] Flags for command.

Those are job-dependent. See all DRM_PVR_SUBMIT_JOB_*.

cmd_stream_len

[IN] Length of command stream, in bytes.

cmd_stream

[IN] Pointer to command stream for command.

The command stream must be u64-aligned.

sync_ops

[IN] Fragment sync operations.

hwrt

[IN] HWRT data used by render jobs (geometry or fragment).

Must be zero for non-render jobs.

Internal notes¶

To validate the constraints imposed on IOCTL argument structs, a collection of macros and helper functions exist in pvr_device.h.

Of the current helpers, it should only be necessary to call PVR_IOCTL_UNION_PADDING_CHECK() directly. This macro should be used once in every code path which extracts a union member from a struct passed from userspace.

bool pvr_ioctl_union_padding_check(void *instance, size_t union_offset, size_t union_size, size_t member_size)¶: Validate that the implicit padding between the end of a union member and the end of the union itself is zeroed.

Parameters

void *instance: Pointer to the instance of the struct to validate.
size_t union_offset: Offset into the type of instance of the target union. Must be 64-bit aligned.
size_t union_size: Size of the target union in the type of instance. Must be 64-bit aligned.
size_t member_size: Size of the target member in the target union specified by union_offset and union_size. It is assumed that the offset of the target member is zero relative to union_offset. Must be 64-bit aligned.

Description

You probably want to use PVR_IOCTL_UNION_PADDING_CHECK() instead of calling this function directly, since that macro abstracts away much of the setup, and also provides some static validation. See its docs for details.

Return

true if every byte between the end of the used member of the union and the end of that union is zeroed, or

false otherwise.

PVR_STATIC_ASSERT_64BIT_ALIGNED¶

PVR_STATIC_ASSERT_64BIT_ALIGNED (static_expr_)

Inline assertion for 64-bit alignment.

Parameters

static_expr_: Target expression to evaluate.

Description

If static_expr_ does not evaluate to a constant integer which would be a 64-bit aligned address (i.e. a multiple of 8), compilation will fail.

Return

The value of static_expr_.

PVR_IOCTL_UNION_PADDING_CHECK¶

PVR_IOCTL_UNION_PADDING_CHECK (struct_instance_, union_, member_)

Validate that the implicit padding between the end of a union member and the end of the union itself is zeroed.

Parameters

struct_instance_: An expression which evaluates to a pointer to a UAPI data struct.
union_: The name of the union member of struct_instance_ to check. If the union member is nested within the type of struct_instance_, this may contain the member access operator (“.”).
member_: The name of the member of union_ to assess.

Description

This is a wrapper around pvr_ioctl_union_padding_check() which performs alignment checks and simplifies things for the caller.

Return

true if every byte in struct_instance_ between the end of member_ and the end of union_ is zeroed, or

false otherwise.

The Linux Kernel

Contents

This Page

UAPI¶

OBJECT ARRAYS¶

IOCTLS¶

DEV_QUERY¶

CREATE_BO¶

GET_BO_MMAP_OFFSET¶

CREATE_VM_CONTEXT and DESTROY_VM_CONTEXT¶

VM_MAP and VM_UNMAP¶

CREATE_CONTEXT and DESTROY_CONTEXT¶

CREATE_FREE_LIST and DESTROY_FREE_LIST¶

CREATE_HWRT_DATASET and DESTROY_HWRT_DATASET¶

SUBMIT_JOBS¶

Internal notes¶