# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/mediatek,mt6316d-regulator.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: MediaTek MT6316 DP/TP SPMI PMIC Regulators maintainers: - AngeloGioacchino Del Regno description: The MediaTek MT6316DP/TP PMICs are fully controlled by SPMI interface, both feature four step-down DC/DC (buck) converters, and provides a single Phase, joining Buck 1+2+3+4. properties: compatible: const: mediatek,mt6316d-regulator reg: maxItems: 1 vbuck1234: type: object $ref: regulator.yaml# unevaluatedProperties: false properties: regulator-allowed-modes: description: | Allowed Buck regulator operating modes allowed. Valid values below. 0 - Normal mode with automatic power saving, reducing the switching frequency when light load conditions are detected 1 - Forced Continuous Conduction mode (FCCM) for improved voltage regulation accuracy with constant switching frequency but lower regulator efficiency 2 - Forced Low Power mode for improved regulator efficiency, used when no heavy load is expected, will shut down unnecessary IP blocks and secondary phases to reduce quiescent current. This mode does not limit the maximum output current but unless only a light load is applied, there will be regulation accuracy and efficiency losses. minItems: 1 maxItems: 3 items: enum: [ 0, 1, 2 ] required: - compatible - reg additionalProperties: false examples: - | #include spmi { #address-cells = <2>; #size-cells = <0>; pmic@7 { compatible = "mediatek,mt6316d-regulator"; reg = <0x7 SPMI_USID>; vbuck1234 { regulator-name = "dvdd_gpustack"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <1277500>; regulator-allowed-modes = <0 1 2>; regulator-enable-ramp-delay = <256>; }; }; }; ...