# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/ti,control-phy-otghs.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI OMAP Control PHY Module maintainers: - Roger Quadros description: The TI OMAP Control PHY module is a hardware block within the system control module (SCM) of Texas Instruments OMAP SoCs. It provides centralized control over power, configuration, and auxiliary features for multiple on-chip PHYs. This module is essential for proper PHY operation in power-constrained embedded systems. properties: $nodename: pattern: "^phy@[0-9a-f]+$" compatible: enum: - ti,control-phy-otghs - ti,control-phy-pcie - ti,control-phy-pipe3 - ti,control-phy-usb2 - ti,control-phy-usb2-am437 - ti,control-phy-usb2-dra7 reg: minItems: 1 maxItems: 3 reg-names: minItems: 1 maxItems: 3 items: enum: [otghs_control, power, pcie_pcs, control_sma] allOf: - if: properties: compatible: contains: enum: - ti,control-phy-otghs then: properties: reg-names: const: otghs_control - if: properties: compatible: contains: enum: - ti,control-phy-pcie then: properties: reg: minItems: 3 reg-names: items: - const: power - const: pcie_pcs - const: control_sma - if: properties: compatible: contains: enum: - ti,control-phy-usb2 - ti,control-phy-usb2-dra7 - ti,control-phy-usb2-am437 - ti,control-phy-pipe3 then: properties: reg-names: const: power required: - reg - compatible - reg-names unevaluatedProperties: false examples: - | phy@4a00233c { compatible = "ti,control-phy-otghs"; reg = <0x4a00233c 0x4>; reg-names = "otghs_control"; }; ...