# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip PCIe v3 phy maintainers: - Heiko Stuebner properties: compatible: enum: - rockchip,rk3568-pcie3-phy - rockchip,rk3588-pcie3-phy reg: maxItems: 1 clocks: minItems: 1 maxItems: 3 clock-names: minItems: 1 maxItems: 3 data-lanes: description: which lanes (by position) should be mapped to which controller (value). 0 means lane disabled, higher value means used. (controller-number +1 ) $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 16 items: minimum: 0 maximum: 16 "#phy-cells": const: 0 resets: maxItems: 1 reset-names: const: phy rockchip,phy-grf: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the syscon managing the phy "general register files" rockchip,pipe-grf: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the syscon managing the pipe "general register files" required: - compatible - reg - rockchip,phy-grf - "#phy-cells" allOf: - if: properties: compatible: enum: - rockchip,rk3588-pcie3-phy then: properties: clocks: maxItems: 1 clock-names: items: - const: pclk else: properties: clocks: minItems: 3 clock-names: items: - const: refclk_m - const: refclk_n - const: pclk additionalProperties: false examples: - | #include pcie30phy: phy@fe8c0000 { compatible = "rockchip,rk3568-pcie3-phy"; reg = <0xfe8c0000 0x20000>; #phy-cells = <0>; clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, <&cru PCLK_PCIE30PHY>; clock-names = "refclk_m", "refclk_n", "pclk"; resets = <&cru SRST_PCIE30PHY>; reset-names = "phy"; rockchip,phy-grf = <&pcie30_phy_grf>; };