# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2025, Google LLC
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/google,lga-usb-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Google Tensor Series G5 (Laguna) USB PHY

maintainers:
  - Roy Luo <royluo@google.com>

description:
  Describes the USB PHY interfaces integrated with the DWC3 USB controller on
  Google Tensor SoCs, starting with the G5 generation (laguna).
  Two specific PHY IPs from Synopsys are integrated, including eUSB 2.0 PHY IP
  and USB3.2/DisplayPort combo PHY IP.

properties:
  compatible:
    const: google,lga-usb-phy

  reg:
    items:
      - description: USB3.2/DisplayPort combo PHY core registers.
      - description: USB3.2/DisplayPort combo PHY Type-C Assist registers.
      - description: eUSB 2.0 PHY core registers.
      - description: Top-level wrapper registers for the integrated PHYs.

  reg-names:
    items:
      - const: usb3_core
      - const: usb3_tca
      - const: usb2_core
      - const: usbdp_top

  "#phy-cells":
    description: |
      The phandle's argument in the PHY specifier selects one of the three
      following PHY interfaces.
      - 0 for USB high-speed.
      - 1 for USB super-speed.
      - 2 for DisplayPort.
    const: 1

  clocks:
    items:
      - description: USB2 PHY clock.
      - description: USB2 PHY APB clock.
      - description: USB3.2/DisplayPort combo PHY clock.
      - description: USB3.2/DisplayPort combo PHY firmware clock.

  clock-names:
    items:
      - const: usb2
      - const: usb2_apb
      - const: usb3
      - const: usb3_fw

  resets:
    items:
      - description: USB2 PHY reset.
      - description: USB2 PHY APB reset.
      - description: USB3.2/DisplayPort combo PHY reset.

  reset-names:
    items:
      - const: usb2
      - const: usb2_apb
      - const: usb3

  power-domains:
    maxItems: 1

  orientation-switch:
    type: boolean
    description:
      Indicates the PHY as a handler of USB Type-C orientation changes

  google,usb-cfg-csr:
    description:
      A phandle to a syscon node used to access the USB configuration
      registers. These registers are the top-level wrapper of the USB
      subsystem and provide control and status for the integrated USB
      controller and USB PHY.
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to the syscon node.
          - description: USB2 PHY configuration register offset.

required:
  - compatible
  - reg
  - reg-names
  - "#phy-cells"
  - clocks
  - clock-names
  - resets
  - reset-names
  - power-domains
  - orientation-switch
  - google,usb-cfg-csr

additionalProperties: false

examples:
  - |
    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        usb-phy@c410000 {
            compatible = "google,lga-usb-phy";
            reg = <0 0x0c410000 0 0x20000>,
                  <0 0x0c430000 0 0x1000>,
                  <0 0x0c440000 0 0x10000>,
                  <0 0x0c637000 0 0xa0>;
            reg-names = "usb3_core", "usb3_tca", "usb2_core", "usbdp_top";
            #phy-cells = <1>;
            clocks = <&hsion_usb2_phy_clk>, <&hsion_u2phy_apb_clk>,
                     <&hsion_usb3_phy_clk>, <&hsion_usb3_phy_fw_clk>;
            clock-names = "usb2", "usb2_apb", "usb3", "usb3_fw";
            resets = <&hsion_resets_usb2_phy>,
                     <&hsion_resets_u2phy_apb>,
                     <&hsion_resets_usb3_phy>;
            reset-names = "usb2", "usb2_apb", "usb3";
            power-domains = <&hsio_n_usb_pd>;
            orientation-switch;
            google,usb-cfg-csr = <&usb_cfg_csr 0x14>;
        };
    };
...