# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: STMicroelectronics STM32MP25 PCIe Endpoint

maintainers:
  - Christian Bruel <christian.bruel@foss.st.com>

description:
  PCIe endpoint controller based on the Synopsys DesignWare PCIe core.

allOf:
  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#

properties:
  compatible:
    const: st,stm32mp25-pcie-ep

  reg:
    items:
      - description: Data Bus Interface (DBI) registers.
      - description: Data Bus Interface (DBI) shadow registers.
      - description: Internal Address Translation Unit (iATU) registers.
      - description: PCIe configuration registers.

  reg-names:
    items:
      - const: dbi
      - const: dbi2
      - const: atu
      - const: addr_space

  reset-gpios:
    description: GPIO controlled connection to PERST# signal
    maxItems: 1

  phys:
    maxItems: 1

required:
  - phys
  - reset-gpios

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/phy/phy.h>
    #include <dt-bindings/reset/st,stm32mp25-rcc.h>

    pcie-ep@48400000 {
        compatible = "st,stm32mp25-pcie-ep";
        reg = <0x48400000 0x400000>,
              <0x48500000 0x100000>,
              <0x48700000 0x80000>,
              <0x10000000 0x10000000>;
        reg-names = "dbi", "dbi2", "atu", "addr_space";
        clocks = <&rcc CK_BUS_PCIE>;
        phys = <&combophy PHY_TYPE_PCIE>;
        resets = <&rcc PCIE_R>;
        pinctrl-names = "default", "init";
        pinctrl-0 = <&pcie_pins_a>;
        pinctrl-1 = <&pcie_init_pins_a>;
        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
        access-controllers = <&rifsc 68>;
        power-domains = <&CLUSTER_PD>;
    };