# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/hisilicon,hi3660-dw-mshc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Hisilicon specific extensions to the Synopsys Designware Mobile Storage Host Controller

maintainers:
  - Zhangfei Gao <zhangfei.gao@linaro.org>

description:
  The Synopsys designware mobile storage host controller is used to interface
  a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
  differences between the core Synopsys dw mshc controller properties described
  by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
  extensions to the Synopsys Designware Mobile Storage Host Controller.

allOf:
  - $ref: /schemas/mmc/synopsys-dw-mshc-common.yaml#

properties:
  compatible:
    oneOf:
      - enum:
          - hisilicon,hi3660-dw-mshc
          - hisilicon,hi4511-dw-mshc
          - hisilicon,hi6220-dw-mshc
      - items:
          - const: hisilicon,hi3670-dw-mshc
          - const: hisilicon,hi3660-dw-mshc

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: card interface unit clock
      - description: bus interface unit clock

  clock-names:
    items:
      - const: ciu
      - const: biu

  hisilicon,peripheral-syscon:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: phandle of syscon used to control peripheral.

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/hi3620-clock.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    mmc@fcd03000 {
        compatible = "hisilicon,hi4511-dw-mshc";
        reg = <0xfcd03000 0x1000>;
        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
        #address-cells = <1>;
        #size-cells = <0>;
        clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
        clock-names = "ciu", "biu";
        vmmc-supply = <&ldo12>;
        fifo-depth = <0x100>;
        pinctrl-names = "default";
        pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
        bus-width = <4>;
        disable-wp;
        cd-gpios = <&gpio10 3 GPIO_ACTIVE_HIGH>;
        cap-mmc-highspeed;
        cap-sd-highspeed;
    };

  - |
    #include <dt-bindings/clock/hi6220-clock.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      mmc@f723e000 {
          compatible = "hisilicon,hi6220-dw-mshc";
          reg = <0x0 0xf723e000 0x0 0x1000>;
          interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
          clocks = <&clock_sys HI6220_MMC1_CIUCLK>,
                   <&clock_sys HI6220_MMC1_CLK>;
          clock-names = "ciu", "biu";
          bus-width = <4>;
          disable-wp;
          cap-sd-highspeed;
          sd-uhs-sdr12;
          sd-uhs-sdr25;
          card-detect-delay = <200>;
          hisilicon,peripheral-syscon = <&ao_ctrl>;
          cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
          pinctrl-names = "default", "idle";
          pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
          pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
          vqmmc-supply = <&ldo7>;
          vmmc-supply = <&ldo10>;
      };
    };