# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interconnect/qcom,milos-rpmh.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm RPMh Network-On-Chip Interconnect on Milos SoC maintainers: - Luca Weiss description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is able to communicate with the BCM through the Resource State Coordinator (RSC) associated with each execution environment. Provider nodes must point to at least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. See also: include/dt-bindings/interconnect/qcom,milos-rpmh.h properties: compatible: enum: - qcom,milos-aggre1-noc - qcom,milos-aggre2-noc - qcom,milos-clk-virt - qcom,milos-cnoc-cfg - qcom,milos-cnoc-main - qcom,milos-gem-noc - qcom,milos-lpass-ag-noc - qcom,milos-mc-virt - qcom,milos-mmss-noc - qcom,milos-nsp-noc - qcom,milos-pcie-anoc - qcom,milos-system-noc reg: maxItems: 1 clocks: minItems: 1 maxItems: 2 required: - compatible allOf: - $ref: qcom,rpmh-common.yaml# - if: properties: compatible: contains: enum: - qcom,milos-clk-virt - qcom,milos-mc-virt then: properties: reg: false else: required: - reg - if: properties: compatible: contains: enum: - qcom,milos-pcie-anoc then: properties: clocks: items: - description: aggre-NOC PCIe AXI clock - description: cfg-NOC PCIe a-NOC AHB clock - if: properties: compatible: contains: enum: - qcom,milos-aggre1-noc then: properties: clocks: items: - description: aggre USB3 PRIM AXI clock - description: aggre UFS PHY AXI clock - if: properties: compatible: contains: enum: - qcom,milos-aggre2-noc then: properties: clocks: items: - description: RPMH CC IPA clock - if: properties: compatible: contains: enum: - qcom,milos-aggre1-noc - qcom,milos-aggre2-noc - qcom,milos-pcie-anoc then: required: - clocks else: properties: clocks: false unevaluatedProperties: false examples: - | #include interconnect-0 { compatible = "qcom,milos-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; interconnect@16e0000 { compatible = "qcom,milos-aggre1-noc"; reg = <0x016e0000 0x16400>; #interconnect-cells = <2>; clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; qcom,bcm-voters = <&apps_bcm_voter>; };