# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interconnect/qcom,kuno-rpmh.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm RPMh Network-On-Chip Interconnect on Kuno SoC maintainers: - Hardeep Sharma description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is able to communicate with the BCM through the Resource State Coordinator (RSC) associated with each execution environment. Provider nodes must point to at least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. See also: include/dt-bindings/interconnect/qcom,kuno.h properties: compatible: enum: - qcom,kuno-aggre-noc - qcom,kuno-clk-virt - qcom,kuno-cnoc-main - qcom,kuno-dc-noc - qcom,kuno-mc-virt - qcom,kuno-mem-noc - qcom,kuno-pcie-anoc - qcom,kuno-system-noc reg: maxItems: 1 clocks: minItems: 1 maxItems: 2 required: - compatible allOf: - $ref: qcom,rpmh-common.yaml# - if: properties: compatible: contains: enum: - qcom,kuno-clk-virt - qcom,kuno-mc-virt then: properties: reg: false else: required: - reg - if: properties: compatible: contains: const: qcom,kuno-aggre-noc then: properties: clocks: items: - description: System NoC USB SF AXI clock - description: IPA clock - if: properties: compatible: contains: const: qcom,kuno-system-noc then: properties: clocks: items: - description: IPA clock - if: properties: compatible: contains: enum: - qcom,kuno-aggre-noc - qcom,kuno-system-noc then: required: - clocks else: properties: clocks: false unevaluatedProperties: false examples: - | #include #include clk_virt: interconnect-0 { compatible = "qcom,kuno-clk-virt"; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre_noc: interconnect@1640000 { compatible = "qcom,kuno-aggre-noc"; reg = <0x01640000 0x33400>; clocks = <&gcc GCC_SYS_NOC_USB_SF_AXI_CLK>, <&rpmhcc RPMH_IPA_CLK>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; ...