# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/marvell,mvebu-core-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Marvell MVEBU SoC core clock

maintainers:
  - Andrew Lunn <andrew@lunn.ch>
  - Gregory Clement <gregory.clement@bootlin.com>

description: >
  Marvell MVEBU SoCs usually allow to determine core clock frequencies by
  reading the Sample-At-Reset (SAR) register. The core clock consumer should
  specify the desired clock by having the clock ID in its "clocks" phandle cell.

  The following is a list of provided IDs and clock names on Armada 370/XP:
   0 = tclk    (Internal Bus clock)
   1 = cpuclk  (CPU clock)
   2 = nbclk   (L2 Cache clock)
   3 = hclk    (DRAM control clock)
   4 = dramclk (DDR clock)

  The following is a list of provided IDs and clock names on Armada 375:
   0 = tclk    (Internal Bus clock)
   1 = cpuclk  (CPU clock)
   2 = l2clk   (L2 Cache clock)
   3 = ddrclk  (DDR clock)

  The following is a list of provided IDs and clock names on Armada 380/385:
   0 = tclk    (Internal Bus clock)
   1 = cpuclk  (CPU clock)
   2 = l2clk   (L2 Cache clock)
   3 = ddrclk  (DDR clock)

  The following is a list of provided IDs and clock names on Armada 39x:
   0 = tclk    (Internal Bus clock)
   1 = cpuclk  (CPU clock)
   2 = nbclk   (Coherent Fabric clock)
   3 = hclk    (SDRAM Controller Internal Clock)
   4 = dclk    (SDRAM Interface Clock)
   5 = refclk  (Reference Clock)

  The following is a list of provided IDs and clock names on 98dx3236:
   0 = tclk    (Internal Bus clock)
   1 = cpuclk  (CPU clock)
   2 = ddrclk  (DDR clock)
   3 = mpll    (MPLL Clock)

  The following is a list of provided IDs and clock names on Kirkwood and Dove:
   0 = tclk   (Internal Bus clock)
   1 = cpuclk (CPU0 clock)
   2 = l2clk  (L2 Cache clock derived from CPU0 clock)
   3 = ddrclk (DDR controller clock derived from CPU0 clock)

  The following is a list of provided IDs and clock names on Orion5x:
   0 = tclk   (Internal Bus clock)
   1 = cpuclk (CPU0 clock)
   2 = ddrclk (DDR controller clock derived from CPU0 clock)

properties:
  compatible:
    enum:
      - marvell,armada-370-core-clock
      - marvell,armada-375-core-clock
      - marvell,armada-380-core-clock
      - marvell,armada-390-core-clock
      - marvell,armada-xp-core-clock
      - marvell,dove-core-clock
      - marvell,kirkwood-core-clock
      - marvell,mv88f5181-core-clock
      - marvell,mv88f5182-core-clock
      - marvell,mv88f5281-core-clock
      - marvell,mv88f6180-core-clock
      - marvell,mv88f6183-core-clock
      - marvell,mv98dx1135-core-clock
      - marvell,mv98dx3236-core-clock

  reg:
    maxItems: 1

  '#clock-cells':
    const: 1

  clock-output-names:
    description: Overwrite default clock output names.

required:
  - compatible
  - reg
  - '#clock-cells'

additionalProperties: false