What: /sys/bus/platform/devices/INT3407:00/dptf_power/charger_type Date: Jul, 2016 KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) The charger type - Traditional, Hybrid or NVDC. What: /sys/bus/platform/devices/INT3407:00/dptf_power/adapter_rating_mw Date: Jul, 2016 KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Adapter rating in milliwatts (the maximum Adapter power). Must be 0 if no AC Adaptor is plugged in. What: /sys/bus/platform/devices/INT3407:00/dptf_power/max_platform_power_mw Date: Jul, 2016 KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Maximum platform power that can be supported by the battery in milliwatts. What: /sys/bus/platform/devices/INT3407:00/dptf_power/platform_power_source Date: Jul, 2016 KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Display the platform power source ========= ============================ bits[3:0] Current power source - 0x00 = DC - 0x01 = AC - 0x02 = USB - 0x03 = Wireless Charger bits[7:4] Power source sequence number ========= ============================ What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power Date: Jul, 2016 KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) The maximum sustained power for battery in milliwatts. What: /sys/bus/platform/devices/INT3407:00/dptf_power/rest_of_platform_power_mw Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) Shows the rest (outside of SoC) of worst-case platform power. What: /sys/bus/platform/devices/INT3407:00/dptf_power/prochot_confirm Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (WO) Confirm embedded controller about a prochot notification. What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_platform_power_mw Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) The maximum platform power that can be supported by the battery in milli watts. What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_steady_state_power_mw Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) The maximum sustained power for battery in milli watts. What: /sys/bus/platform/devices/INT3532:00/dptf_battery/high_freq_impedance_mohm Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) The high frequency impedance value that can be obtained from battery fuel gauge in milli Ohms. What: /sys/bus/platform/devices/INT3532:00/dptf_battery/no_load_voltage_mv Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) The no-load voltage that can be obtained from battery fuel gauge in milli volts. What: /sys/bus/platform/devices/INT3532:00/dptf_battery/current_discharge_capbility_ma Date: June, 2020 KernelVersion: v5.8 Contact: linux-acpi@vger.kernel.org Description: (RO) The battery discharge current capability obtained from battery fuel gauge in milli Amps. What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock Date: November, 2020 KernelVersion: v5.10 Contact: linux-acpi@vger.kernel.org Description: (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz, when FIVR clock is 19.2MHz or 24MHz. What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock Date: November, 2020 KernelVersion: v5.10 Contact: linux-acpi@vger.kernel.org Description: (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz, when FIVR clock is 38.4MHz. What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz Date: September, 2021 KernelVersion: v5.15 Contact: linux-acpi@vger.kernel.org Description: (RO) Get the FIVR switching control frequency in MHz. What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status Date: September, 2021 KernelVersion: v5.15 Contact: linux-acpi@vger.kernel.org Description: (RO) Read the FIVR switching frequency control fault status. What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info Date: September, 2021 KernelVersion: v5.15 Contact: linux-acpi@vger.kernel.org Description: (RO) Presents SSC (spread spectrum clock) information for EMI (Electro magnetic interference) control. This is a bit mask. ======= ========================================== Bits Description ======= ========================================== [7:0] Sets clock spectrum spread percentage: 0x00=0.2% , 0x3F=10% 1 LSB = 0.1% increase in spread (for settings 0x01 thru 0x1C) 1 LSB = 0.2% increase in spread (for settings 0x1E thru 0x3F) [8] When set to 1, enables spread spectrum clock [9] 0: Triangle mode. FFC frequency walks around the Fcenter in a linear fashion 1: Random walk mode. FFC frequency changes randomly within the SSC (Spread spectrum clock) range [10] 0: No white noise. 1: Add white noise to spread waveform [11] When 1, future writes are ignored. ======= ==========================================