From b9f051eb6cc013b90cb6062a1e2502e9c0adf0f4 Mon Sep 17 00:00:00 2001 From: Arthur Othieno Date: Thu, 8 Jun 2006 22:23:45 -0700 Subject: [SCSI] scsi: remove Documentation/scsi/cpqfc.txt cpqfc driver flushed out with: [SCSI] remove broken driver cpqfc (commit ca61f10ab2b874b889e89d14ea09fae2dcccdca6) but somehow Documentation/scsi/cpqfc.txt managed to survive the blast. Signed-off-by: Arthur Othieno Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- Documentation/scsi/00-INDEX | 2 - Documentation/scsi/cpqfc.txt | 272 ------------------------------------------- 2 files changed, 274 deletions(-) delete mode 100644 Documentation/scsi/cpqfc.txt diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index e7da8c3a255bf..12354830c6b02 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -30,8 +30,6 @@ aic7xxx.txt - info on driver for Adaptec controllers aic7xxx_old.txt - info on driver for Adaptec controllers, old generation -cpqfc.txt - - info on driver for Compaq Tachyon TS adapters dpti.txt - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters dtc3x80.txt diff --git a/Documentation/scsi/cpqfc.txt b/Documentation/scsi/cpqfc.txt deleted file mode 100644 index dd33e61c06455..0000000000000 --- a/Documentation/scsi/cpqfc.txt +++ /dev/null @@ -1,272 +0,0 @@ -Notes for CPQFCTS driver for Compaq Tachyon TS -Fibre Channel Host Bus Adapter, PCI 64-bit, 66MHz -for Linux (RH 6.1, 6.2 kernel 2.2.12-32, 2.2.14-5) -SMP tested -Tested in single and dual HBA configuration, 32 and 64bit busses, -33 and 66MHz. Only supports FC-AL. -SEST size 512 Exchanges (simultaneous I/Os) limited by module kmalloc() - max of 128k bytes contiguous. - -Ver 2.5.4 Oct 03, 2002 - * fixed memcpy of sense buffer in ioctl to copy the smaller defined size -Ver 2.5.3 Aug 01, 2002 - * fix the passthru ioctl to handle the Scsi_Cmnd->request being a pointer -Ver 2.5.1 Jul 30, 2002 - * fix ioctl to pay attention to the specified LUN. -Ver 2.5.0 Nov 29, 2001 - * eliminated io_request_lock. This change makes the driver specific - to the 2.5.x kernels. - * silenced excessively noisy printks. - -Ver 2.1.2 July 23, 2002 - * initialize DumCmnd->lun in cpqfcTS_ioctl (used in fcFindLoggedInPorts as LUN index) - -Ver 2.1.1 Oct 18, 2001 - * reinitialize Cmnd->SCp.sent_command (used to identify commands as - passthrus) on calling scsi_done, since the scsi mid layer does not - use (or reinitialize) this field to prevent subsequent comands from - having it set incorrectly. - -Ver 2.1.0 Aug 27, 2001 - * Revise driver to use new kernel 2.4.x PCI DMA API, instead of - virt_to_bus(). (enables driver to work w/ ia64 systems with >2Gb RAM.) - Rework main scatter-gather code to handle cases where SG element - lengths are larger than 0x7FFFF bytes and use as many scatter - gather pages as necessary. (Steve Cameron) - * Makefile changes to bring cpqfc into line w/ rest of SCSI drivers - (thanks to Keith Owens) - -Ver 2.0.5 Aug 06, 2001 - * Reject non-existent luns in the driver rather than letting the - hardware do it. (some HW behaves differently than others in this area.) - * Changed Makefile to rely on "make dep" instead of explicit dependencies - * ifdef'ed out fibre channel analyzer triggering debug code - * fixed a jiffies wrapping issue - -Ver 2.0.4 Aug 01, 2001 - * Incorporated fix for target device reset from Steeleye - * Fixed passthrough ioctl so it doesn't hang. - * Fixed hang in launch_FCworker_thread() that occurred on some machines. - * Avoid problem when number of volumes in a single cabinet > 8 - -Ver 2.0.2 July 23, 2001 - Changed the semiphore changes so the driver would compile in 2.4.7. - This version is for 2.4.7 and beyond. - -Ver 2.0.1 May 7, 2001 - Merged version 1.3.6 fixes into version 2.0.0. - -Ver 2.0.0 May 7, 2001 - Fixed problem so spinlock is being initialized to UNLOCKED. - Fixed updated driver so it compiles in the 2.4 tree. - - Ver 1.3.6 Feb 27, 2001 - Added Target_Device_Reset function for SCSI error handling - Fixed problem with not reseting addressing mode after implicit logout - - -Ver 1.3.4 Sep 7, 2000 - Added Modinfo information - Fixed problem with statically linking the driver - -Ver 1.3.3, Aug 23, 2000 - Fixed device/function number in ioctl - -Ver 1.3.2, July 27, 2000 - Add include for Alpha compile on 2.2.14 kernel (cpq*i2c.c) - Change logic for different FCP-RSP sense_buffer location for HSG80 target - And search for Agilent Tachyon XL2 HBAs (not finished! - in test) - -Tested with -(storage): - Compaq RA-4x000, RAID firmware ver 2.40 - 2.54 - Seagate FC drives model ST39102FC, rev 0006 - Hitachi DK31CJ-72FC rev J8A8 - IBM DDYF-T18350R rev F60K - Compaq FC-SCSI bridge w/ DLT 35/70 Gb DLT (tape) -(servers): - Compaq PL-1850R - Compaq PL-6500 Xeon (400MHz) - Compaq PL-8500 (500MHz, 66MHz, 64bit PCI) - Compaq Alpha DS20 (RH 6.1) -(hubs): - Vixel Rapport 1000 (7-port "dumb") - Gadzoox Gibralter (12-port "dumb") - Gadzoox Capellix 2000, 3000 -(switches): - Brocade 2010, 2400, 2800, rev 2.0.3a (& later) - Gadzoox 3210 (Fabric blade beta) - Vixel 7100 (Fabric beta firmare - known hot plug issues) -using "qa_test" (esp. io_test script) suite modified from Unix tests. - -Installation: -make menuconfig - (select SCSI low-level, Compaq FC HBA) -make modules -make modules_install - -e.g. insmod -f cpqfc - -Due to Fabric/switch delays, driver requires 4 seconds -to initialize. If adapters are found, there will be a entries at -/proc/scsi/cpqfcTS/* - -sample contents of startup messages - -************************* - scsi_register allocating 3596 bytes for CPQFCHBA - ioremap'd Membase: c887e600 - HBA Tachyon RevId 1.2 -Allocating 119808 for 576 Exchanges @ c0dc0000 -Allocating 112904 for LinkQ @ c0c20000 (576 elements) -Allocating 110600 for TachSEST for 512 Exchanges - cpqfcTS: writing IMQ BASE 7C0000h PI 7C4000h - cpqfcTS: SEST c0e40000(virt): Wrote base E40000h @ c887e740 -cpqfcTS: New FC port 0000E8h WWN: 500507650642499D SCSI Chan/Trgt 0/0 -cpqfcTS: New FC port 0000EFh WWN: 50000E100000D5A6 SCSI Chan/Trgt 0/1 -cpqfcTS: New FC port 0000E4h WWN: 21000020370097BB SCSI Chan/Trgt 0/2 -cpqfcTS: New FC port 0000E2h WWN: 2100002037009946 SCSI Chan/Trgt 0/3 -cpqfcTS: New FC port 0000E1h WWN: 21000020370098FE SCSI Chan/Trgt 0/4 -cpqfcTS: New FC port 0000E0h WWN: 21000020370097B2 SCSI Chan/Trgt 0/5 -cpqfcTS: New FC port 0000DCh WWN: 2100002037006CC1 SCSI Chan/Trgt 0/6 -cpqfcTS: New FC port 0000DAh WWN: 21000020370059F6 SCSI Chan/Trgt 0/7 -cpqfcTS: New FC port 00000Fh WWN: 500805F1FADB0E20 SCSI Chan/Trgt 0/8 -cpqfcTS: New FC port 000008h WWN: 500805F1FADB0EBA SCSI Chan/Trgt 0/9 -cpqfcTS: New FC port 000004h WWN: 500805F1FADB1EB9 SCSI Chan/Trgt 0/10 -cpqfcTS: New FC port 000002h WWN: 500805F1FADB1ADE SCSI Chan/Trgt 0/11 -cpqfcTS: New FC port 000001h WWN: 500805F1FADBA2CA SCSI Chan/Trgt 0/12 -scsi4 : Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2: WWN 500508B200193F50 - on PCI bus 0 device 0xa0fc irq 5 IObaseL 0x3400, MEMBASE 0xc6ef8600 -PCI bus width 32 bits, bus speed 33 MHz -FCP-SCSI Driver v1.3.0 -GBIC detected: Short-wave. LPSM 0h Monitor -scsi : 5 hosts. - Vendor: IBM Model: DDYF-T18350R Rev: F60K - Type: Direct-Access ANSI SCSI revision: 03 -Detected scsi disk sdb at scsi4, channel 0, id 0, lun 0 - Vendor: HITACHI Model: DK31CJ-72FC Rev: J8A8 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdc at scsi4, channel 0, id 1, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdd at scsi4, channel 0, id 2, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sde at scsi4, channel 0, id 3, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdf at scsi4, channel 0, id 4, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdg at scsi4, channel 0, id 5, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdh at scsi4, channel 0, id 6, lun 0 - Vendor: SEAGATE Model: ST39102FC Rev: 0006 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdi at scsi4, channel 0, id 7, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.48 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdj at scsi4, channel 0, id 8, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.48 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdk at scsi4, channel 0, id 8, lun 1 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.40 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdl at scsi4, channel 0, id 9, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.40 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdm at scsi4, channel 0, id 9, lun 1 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdn at scsi4, channel 0, id 10, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdo at scsi4, channel 0, id 11, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdp at scsi4, channel 0, id 11, lun 1 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdq at scsi4, channel 0, id 12, lun 0 - Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.54 - Type: Direct-Access ANSI SCSI revision: 02 -Detected scsi disk sdr at scsi4, channel 0, id 12, lun 1 -resize_dma_pool: unknown device type 12 -resize_dma_pool: unknown device type 12 -SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB] - sdb: sdb1 -SCSI device sdc: hdwr sector= 512 bytes. Sectors= 144410880 [70513 MB] [70.5 GB] - sdc: sdc1 -SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sdd: sdd1 -SCSI device sde: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sde: sde1 -SCSI device sdf: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sdf: sdf1 -SCSI device sdg: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sdg: sdg1 -SCSI device sdh: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sdh: sdh1 -SCSI device sdi: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] - sdi: sdi1 -SCSI device sdj: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB] - sdj: sdj1 -SCSI device sdk: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB] - sdk: sdk1 -SCSI device sdl: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] - sdl: sdl1 -SCSI device sdm: hdwr sector= 512 bytes. Sectors= 8380320 [4091 MB] [4.1 GB] - sdm: sdm1 -SCSI device sdn: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] - sdn: sdn1 -SCSI device sdo: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] - sdo: sdo1 -SCSI device sdp: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB] - sdp: sdp1 -SCSI device sdq: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB] - sdq: sdq1 -SCSI device sdr: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB] - sdr: sdr1 - -************************* - -If a GBIC of type Short-wave, Long-wave, or Copper is detected, it will -print out; otherwise, "none" is displayed. If the cabling is correct -and a loop circuit is completed, you should see "Monitor"; otherwise, -"LoopFail" (on open circuit) or some LPSM number/state with bit 3 set. - - -ERRATA: -1. Normally, Linux Scsi queries FC devices with INQUIRY strings. All LUNs -found according to INQUIRY should get READ commands at sector 0 to find -partition table, etc. Older kernels only query the first 4 devices. Some -Linux kernels only look for one LUN per target (i.e. FC device). - -2. Physically removing a device, or a malfunctioning system which hides a -device, leads to a 30-second timeout and subsequent _abort call. -In some process contexts, this will hang the kernel (crashing the system). -Single bit errors in frames and virtually all hot plugging events are -gracefully handled with internal driver timer and Abort processing. - -3. Some SCSI drives with error conditions will not handle the 7 second timeout -in this software driver, leading to infinite retries on timed out SCSI commands. -The 7 secs balances the need to quickly recover from lost frames (esp. on sequence -initiatives) and time needed by older/slower/error-state drives in responding. -This can be easily changed in "Exchanges[].timeOut". - -4. Due to the nature of FC soft addressing, there is no assurance that the -same LUNs (drives) will have the same path (e.g. /dev/sdb1) from one boot to -next. Dynamic soft address changes (i.e. 24-bit FC port_id) are -supported during run time (e.g. due to hot plug event) by the use of WWN to -SCSI Nexus (channel/target/LUN) mapping. - -5. Compaq RA4x00 firmware version 2.54 and later supports SSP (Selective -Storage Presentation), which maps LUNs to a WWN. If RA4x00 firmware prior -2.54 (e.g. older controller) is used, or the FC HBA is replaced (another WWN -is used), logical volumes on the RA4x00 will no longer be visible. - - -Send questions/comments to: -Amy Vanzant-Hodge (fibrechannel@compaq.com) - -- cgit 1.2.3-korg