From 6c9cd59dbcb09a2122b5ce0dfc07c74e6fc00dc0 Mon Sep 17 00:00:00 2001 From: MD Danish Anwar Date: Tue, 23 Apr 2024 14:18:28 +0530 Subject: net: phy: dp83869: Fix MII mode failure The DP83869 driver sets the MII bit (needed for PHY to work in MII mode) only if the op-mode is either DP83869_100M_MEDIA_CONVERT or DP83869_RGMII_100_BASE. Some drivers i.e. ICSSG support MII mode with op-mode as DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869 driver. As a result MII mode on ICSSG doesn't work and below log is seen. TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0 icssg-prueth icssg1-eth: can't phy connect port MII0 Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as well. Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by: MD Danish Anwar Reviewed-by: Ravi Gunasekaran Signed-off-by: David S. Miller --- drivers/net/phy/dp83869.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index fa8c6fdcf3018..d7aaefb5226b6 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -695,7 +695,8 @@ static int dp83869_configure_mode(struct phy_device *phydev, phy_ctrl_val = dp83869->mode; if (phydev->interface == PHY_INTERFACE_MODE_MII) { if (dp83869->mode == DP83869_100M_MEDIA_CONVERT || - dp83869->mode == DP83869_RGMII_100_BASE) { + dp83869->mode == DP83869_RGMII_100_BASE || + dp83869->mode == DP83869_RGMII_COPPER_ETHERNET) { phy_ctrl_val |= DP83869_OP_MODE_MII; } else { phydev_err(phydev, "selected op-mode is not valid with MII mode\n"); -- cgit 1.2.3-korg