From 21fdddea8e4cc54341d389916d0c17db8c1ca452 Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Sun, 9 Apr 2006 17:36:39 +0100 Subject: [ALSA] emu10k1: Add support for Audigy4 (not Pro) Signed-off-by: James Courtier-Dutton --- include/sound/emu10k1.h | 2 ++ sound/pci/ac97/ac97_codec.c | 4 +-- sound/pci/ac97/ac97_patch.c | 4 +-- sound/pci/emu10k1/emu10k1_main.c | 56 +++++++++++++++++++++++++++++++++------- sound/pci/emu10k1/emumixer.c | 54 ++++++++++++++++++++++++++++++++++++-- sound/pci/emu10k1/tina2.h | 8 ++---- 6 files changed, 107 insertions(+), 21 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 186e00ad9e79fe..884bbf54cd3611 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -245,6 +245,7 @@ #define A_IOCFG_GPOUT0 0x0044 /* analog/digital */ #define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */ #define A_IOCFG_ENABLE_DIGITAL 0x0004 +#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4 0x0080 #define A_IOCFG_UNKNOWN_20 0x0020 #define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */ #define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */ @@ -1065,6 +1066,7 @@ struct snd_emu_chip_details { unsigned char emu1212m; /* EMU 1212m card */ unsigned char spi_dac; /* SPI interface for DAC */ unsigned char i2c_adc; /* I2C interface for ADC */ + unsigned char adc_1361t; /* Use Philips 1361T ADC */ const char *driver; const char *name; const char *id; /* for backward compatibility - can be NULL if not needed */ diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index d05200741ac376..4544f6aa089d5c 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -563,7 +563,7 @@ AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1) }; static const struct snd_kcontrol_new snd_ac97_controls_mic_boost = - AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0); + AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_MIC, 6, 1, 0); static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"}; @@ -605,7 +605,7 @@ AC97_SINGLE("Simulated Stereo Enhancement", AC97_GENERAL_PURPOSE, 14, 1, 0), AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0), AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0), AC97_ENUM("Mono Output Select", std_enum[2]), -AC97_ENUM("Mic Select", std_enum[3]), +AC97_ENUM("Mic Select Capture Switch", std_enum[3]), AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0) }; diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 4d9cf37300f75a..7ae7bc6524e65a 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -563,7 +563,7 @@ AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1), AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1), AC97_ENUM("Mic Select Source", wm9711_enum[7]), AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1), -AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0), +AC97_SINGLE("Mic 20dB Boost Capture Switch", AC97_MIC, 7, 1, 0), AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0), AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), @@ -653,7 +653,7 @@ AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1), AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1), -AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0), +AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_LINE, 5, 1, 0), AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]), AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1), diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 6bfa08436efa25..e71485c23cc793 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -777,14 +777,6 @@ static int snd_emu10k1_dev_free(struct snd_device *device) static struct snd_emu_chip_details emu_chip_details[] = { /* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/ - /* Audigy4 SB0400 */ - {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102, - .driver = "Audigy2", .name = "Audigy 4 [SB0400]", - .id = "Audigy2", - .emu10k2_chip = 1, - .ca0108_chip = 1, - .spk71 = 1, - .ac97_chip = 1} , /* Tested by James@superbug.co.uk 3rd July 2005 */ /* DSP: CA0108-IAT * DAC: CS4382-KQ @@ -799,13 +791,59 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0108_chip = 1, .spk71 = 1, .ac97_chip = 1} , + /* Audigy4 (Not PRO) SB0610 */ + /* Tested by James@superbug.co.uk 4th April 2006 */ + /* A_IOCFG bits + * Output + * 0: ? + * 1: ? + * 2: ? + * 3: 0 - Digital Out, 1 - Line in + * 4: ? + * 5: ? + * 6: ? + * 7: ? + * Input + * 8: ? + * 9: ? + * A: Green jack sense (Front) + * B: ? + * C: Black jack sense (Rear/Side Right) + * D: Yellow jack sense (Center/LFE/Side Left) + * E: ? + * F: ? + * + * Digital Out/Line in switch using A_IOCFG bit 3 (0x08) + * 0 - Digital Out + * 1 - Line in + */ + /* Mic input not tested. + * Analog CD input not tested + * Digital Out not tested. + * Line in working. + * Audio output 5.1 working. Side outputs not working. + */ + /* DSP: CA10300-IAT LF + * DAC: Cirrus Logic CS4382-KQZ + * ADC: Philips 1361T + * AC97: Sigmatel STAC9750 + * CA0151: None + */ + {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102, + .driver = "Audigy2", .name = "Audigy 4 [SB0610]", + .id = "Audigy2", + .emu10k2_chip = 1, + .ca0108_chip = 1, + .spk71 = 1, + .adc_1361t = 1, /* 24 bit capture instead of 16bit */ + .ac97_chip = 1} , /* Audigy 2 ZS Notebook Cardbus card.*/ /* Tested by James@superbug.co.uk 22th December 2005 */ /* Audio output 7.1/Headphones working. * Digital output working. (AC3 not checked, only PCM) * Audio inputs not tested. */ - /* DSP: Tiny2 + /* DSP: Tina2 * DAC: Wolfson WM8768/WM8568 * ADC: Wolfson WM8775 * AC97: None diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 2a9d12d1068010..c31f3d0877fa42 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -777,6 +777,8 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu, }; static char *audigy_remove_ctls[] = { /* Master/PCM controls on ac97 of Audigy has no effect */ + /* On the Audigy2 the AC97 playback is piped into + * the Philips ADC for 24bit capture */ "PCM Playback Switch", "PCM Playback Volume", "Master Mono Playback Switch", @@ -804,6 +806,47 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu, "AMic Playback Volume", "Mic Playback Volume", NULL }; + static char *audigy_remove_ctls_1361t_adc[] = { + /* On the Audigy2 the AC97 playback is piped into + * the Philips ADC for 24bit capture */ + "PCM Playback Switch", + "PCM Playback Volume", + "Master Mono Playback Switch", + "Master Mono Playback Volume", + "Capture Source", + "Capture Switch", + "Capture Volume", + "Mic Capture Volume", + "Headphone Playback Switch", + "Headphone Playback Volume", + "3D Control - Center", + "3D Control - Depth", + "3D Control - Switch", + "Line2 Playback Volume", + "Line2 Capture Volume", + NULL + }; + static char *audigy_rename_ctls_1361t_adc[] = { + "Master Playback Switch", "Master Capture Switch", + "Master Playback Volume", "Master Capture Volume", + "Wave Master Playback Volume", "Master Playback Volume", + "PC Speaker Playback Switch", "PC Speaker Capture Switch", + "PC Speaker Playback Volume", "PC Speaker Capture Volume", + "Phone Playback Switch", "Phone Capture Switch", + "Phone Playback Volume", "Phone Capture Volume", + "Mic Playback Switch", "Mic Capture Switch", + "Mic Playback Volume", "Mic Capture Volume", + "Line Playback Switch", "Line Capture Switch", + "Line Playback Volume", "Line Capture Volume", + "CD Playback Switch", "CD Capture Switch", + "CD Playback Volume", "CD Capture Volume", + "Aux Playback Switch", "Aux Capture Switch", + "Aux Playback Volume", "Aux Capture Volume", + "Video Playback Switch", "Video Capture Switch", + "Video Playback Volume", "Video Capture Volume", + + NULL + }; if (emu->card_capabilities->ac97_chip) { struct snd_ac97_bus *pbus; @@ -834,7 +877,10 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu, snd_ac97_write_cache(emu->ac97, AC97_MASTER, 0x0000); /* set capture source to mic */ snd_ac97_write_cache(emu->ac97, AC97_REC_SEL, 0x0000); - c = audigy_remove_ctls; + if (emu->card_capabilities->adc_1361t) + c = audigy_remove_ctls_1361t_adc; + else + c = audigy_remove_ctls; } else { /* * Credits for cards based on STAC9758: @@ -863,11 +909,15 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu, } if (emu->audigy) - c = audigy_rename_ctls; + if (emu->card_capabilities->adc_1361t) + c = audigy_rename_ctls_1361t_adc; + else + c = audigy_rename_ctls; else c = emu10k1_rename_ctls; for (; *c; c += 2) rename_ctl(card, c[0], c[1]); + if (emu->card_capabilities->subsystem == 0x20071102) { /* Audigy 4 Pro */ rename_ctl(card, "Line2 Capture Volume", "Line1/Mic Capture Volume"); rename_ctl(card, "Analog Mix Capture Volume", "Line2 Capture Volume"); diff --git a/sound/pci/emu10k1/tina2.h b/sound/pci/emu10k1/tina2.h index 5c43abf03e8986..f2d8eb6c89e19c 100644 --- a/sound/pci/emu10k1/tina2.h +++ b/sound/pci/emu10k1/tina2.h @@ -1,11 +1,7 @@ /* * Copyright (c) by James Courtier-Dutton - * Driver p16v chips - * Version: 0.21 - * - * - * This code was initally based on code from ALSA's emu10k1x.c which is: - * Copyright (c) by Francisco Moraes + * Driver tina2 chips + * Version: 0.1 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit 1.2.3-korg