From 2087da5dc12c497123d5fb8949ceed9021b673ec Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 28 Jun 2006 20:17:57 +0200 Subject: [PATCH] bcm43xx: voluntary preemtion in the calibration loops This patch adds voluntary preemption points into the PHY calibration loops to allow non-CONFIG_PREEMPT machines to not suffer from huge delays. CONFIG_PREEMPT machines are already fine, because all this code is run in non-atomic process context. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_phy.c | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c index f8200deecc8a6..eafd0f6626862 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c @@ -81,6 +81,16 @@ static const s8 bcm43xx_tssi2dbm_g_table[] = { static void bcm43xx_phy_initg(struct bcm43xx_private *bcm); +static inline +void bcm43xx_voluntary_preempt(void) +{ + assert(!in_atomic() && !in_irq() && + !in_interrupt() && !irqs_disabled()); +#ifndef CONFIG_PREEMPT + cond_resched(); +#endif /* CONFIG_PREEMPT */ +} + void bcm43xx_raw_phy_lock(struct bcm43xx_private *bcm) { struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); @@ -133,22 +143,14 @@ void bcm43xx_phy_write(struct bcm43xx_private *bcm, u16 offset, u16 val) void bcm43xx_phy_calibrate(struct bcm43xx_private *bcm) { struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); - unsigned long flags; bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* Dummy read. */ if (phy->calibrated) return; if (phy->type == BCM43xx_PHYTYPE_G && phy->rev == 1) { - /* We do not want to be preempted while calibrating - * the hardware. - */ - local_irq_save(flags); - bcm43xx_wireless_core_reset(bcm, 0); bcm43xx_phy_initg(bcm); bcm43xx_wireless_core_reset(bcm, 1); - - local_irq_restore(flags); } phy->calibrated = 1; } @@ -1299,7 +1301,9 @@ static u16 bcm43xx_phy_lo_b_r15_loop(struct bcm43xx_private *bcm) { int i; u16 ret = 0; + unsigned long flags; + local_irq_save(flags); for (i = 0; i < 10; i++){ bcm43xx_phy_write(bcm, 0x0015, 0xAFA0); udelay(1); @@ -1309,6 +1313,8 @@ static u16 bcm43xx_phy_lo_b_r15_loop(struct bcm43xx_private *bcm) udelay(40); ret += bcm43xx_phy_read(bcm, 0x002C); } + local_irq_restore(flags); + bcm43xx_voluntary_preempt(); return ret; } @@ -1435,6 +1441,7 @@ u16 bcm43xx_phy_lo_g_deviation_subval(struct bcm43xx_private *bcm, u16 control) } ret = bcm43xx_phy_read(bcm, 0x002D); local_irq_restore(flags); + bcm43xx_voluntary_preempt(); return ret; } @@ -1760,6 +1767,7 @@ void bcm43xx_phy_lo_g_measure(struct bcm43xx_private *bcm) bcm43xx_radio_write16(bcm, 0x43, i); bcm43xx_radio_write16(bcm, 0x52, radio->txctl2); udelay(10); + bcm43xx_voluntary_preempt(); bcm43xx_phy_set_baseband_attenuation(bcm, j * 2); @@ -1803,6 +1811,7 @@ void bcm43xx_phy_lo_g_measure(struct bcm43xx_private *bcm) radio->txctl2 | (3/*txctl1*/ << 4));//FIXME: shouldn't txctl1 be zero here and 3 in the loop above? udelay(10); + bcm43xx_voluntary_preempt(); bcm43xx_phy_set_baseband_attenuation(bcm, j * 2); @@ -1824,6 +1833,7 @@ void bcm43xx_phy_lo_g_measure(struct bcm43xx_private *bcm) bcm43xx_phy_write(bcm, 0x0812, (r27 << 8) | 0xA2); udelay(2); bcm43xx_phy_write(bcm, 0x0812, (r27 << 8) | 0xA3); + bcm43xx_voluntary_preempt(); } else bcm43xx_phy_write(bcm, 0x0015, r27 | 0xEFA0); bcm43xx_phy_lo_adjust(bcm, is_initializing); @@ -2188,12 +2198,6 @@ int bcm43xx_phy_init(struct bcm43xx_private *bcm) { struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); int err = -ENODEV; - unsigned long flags; - - /* We do not want to be preempted while calibrating - * the hardware. - */ - local_irq_save(flags); switch (phy->type) { case BCM43xx_PHYTYPE_A: @@ -2227,7 +2231,6 @@ int bcm43xx_phy_init(struct bcm43xx_private *bcm) err = 0; break; } - local_irq_restore(flags); if (err) printk(KERN_WARNING PFX "Unknown PHYTYPE found!\n"); -- cgit 1.2.3-korg