From 0f64478cbc7a008fe7b7e9ae79a73d8a6904ead8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Apr 2002 12:14:34 -0700 Subject: USB: add USB serial mos7720 driver Add support for Moschip 7720 USB dual port usb to serial device. This driver is originally based on the drivers/usb/io_edgeport.c driver. Cleaned up and forward ported by me. Cc: VijayaKumar Cc: AjayKumar Cc: Gurudeva Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 10 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/mos7720.c | 1683 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1694 insertions(+) create mode 100644 drivers/usb/serial/mos7720.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 5076b9d97057a..8ca6d3f01e85d 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -422,6 +422,16 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_MOS7720 + tristate "USB Moschip 7720 Single Port Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use a USB Serial single port adapter from + Moschip Semiconductor Tech. + + To compile this driver as a module, choose M here: the + module will be called mos7720. + config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 8dce83340e310..a5047dc599bbf 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c new file mode 100644 index 0000000000000..82cd15b894b0f --- /dev/null +++ b/drivers/usb/serial/mos7720.c @@ -0,0 +1,1683 @@ +/* + * mos7720.c + * Controls the Moschip 7720 usb to dual port serial convertor + * + * Copyright 2006 Moschip Semiconductor Tech. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * Developed by: + * VijayaKumar.G.N. + * AjayKumar + * Gurudeva.N. + * + * Cleaned up from the original by: + * Greg Kroah-Hartman + * + * Originally based on drivers/usb/serial/io_edgeport.c which is: + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * Version Information + */ +#define DRIVER_VERSION "1.0.0.4F" +#define DRIVER_AUTHOR "Aspire Communications pvt Ltd." +#define DRIVER_DESC "Moschip USB Serial Driver" + +/* default urb timeout */ +#define MOS_WDR_TIMEOUT (HZ * 5) + +#define MOS_PORT1 0x0200 +#define MOS_PORT2 0x0300 +#define MOS_VENREG 0x0000 +#define MOS_MAX_PORT 0x02 +#define MOS_WRITE 0x0E +#define MOS_READ 0x0D + +/* Interrupt Rotinue Defines */ +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_RDA 0x04 +#define SERIAL_IIR_CTI 0x0c +#define SERIAL_IIR_THR 0x02 +#define SERIAL_IIR_MS 0x00 + +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ + +/* This structure holds all of the local port information */ +struct moschip_port +{ + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + __u8 shadowMSR; /* last MSR value received */ + char open; + struct async_icount icount; + struct usb_serial_port *port; /* loop back to the owner */ + struct urb *write_urb_pool[NUM_URBS]; +}; + +/* This structure holds all of the individual serial device information */ +struct moschip_serial +{ + int interrupt_started; +}; + +static int debug; + +#define USB_VENDOR_ID_MOSCHIP 0x9710 +#define MOSCHIP_DEVICE_ID_7720 0x7720 +#define MOSCHIP_DEVICE_ID_7715 0x7715 + +static struct usb_device_id moschip_port_id_table [] = { + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP,MOSCHIP_DEVICE_ID_7720) }, + { } /* terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, moschip_port_id_table); + + +/* + * mos7720_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + */ +static void mos7720_interrupt_callback(struct urb *urb) +{ + int result; + int length; + __u32 *data; + unsigned int status; + __u8 sp1; + __u8 sp2; + __u8 st; + + dbg("%s"," : Entering\n"); + + if (!urb) { + dbg("%s","Invalid Pointer !!!!:\n"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Moschip get 4 bytes + * Byte 1 IIR Port 1 (port.number is 0) + * Byte 2 IIR Port 2 (port.number is 1) + * Byte 3 -------------- + * Byte 4 FIFO status for both */ + if (length && length > 4) { + dbg("Wrong data !!!"); + return; + } + + status = *data; + + sp1 = (status & 0xff000000)>>24; + sp2 = (status & 0x00ff0000)>>16; + st = status & 0x000000ff; + + if ((sp1 & 0x01) || (sp2 & 0x01)) { + /* No Interrupt Pending in both the ports */ + dbg("No Interrupt !!!"); + } else { + switch (sp1 & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port 1: Receiver status error or address " + "bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port 1: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port 1: Modem status change"); + break; + } + + switch (sp2 & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port 2: Receiver status error or address " + "bit detected in 9-bit mode"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port 2: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port 2: Modem status change"); + break; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __FUNCTION__, result); + return; +} + +/* + * mos7720_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + */ +static void mos7720_bulk_in_callback(struct urb *urb) +{ + int status; + unsigned char *data ; + struct usb_serial_port *port; + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + if (urb->status) { + dbg("nonzero read bulk status received: %d",urb->status); + return; + } + + mos7720_port = urb->context; + if (!mos7720_port) { + dbg("%s","NULL mos7720_port pointer \n"); + return ; + } + + port = mos7720_port->port; + + dbg("Entering...%s", __FUNCTION__); + + data = urb->transfer_buffer; + + tty = port->tty; + if (tty && urb->actual_length) { + tty_buffer_request_room(tty, urb->actual_length); + tty_insert_flip_string(tty, data, urb->actual_length); + tty_flip_buffer_push(tty); + } + + if (!port->read_urb) { + dbg("URB KILLED !!!"); + return; + } + + if (port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = port->serial->dev; + + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } +} + +/* + * mos7720_bulk_out_data_callback + * this is the callback function for when we have finished sending serial + * data on the bulk out endpoint. + */ +static void mos7720_bulk_out_data_callback(struct urb *urb) +{ + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + if (urb->status) { + dbg("nonzero write bulk status received:%d", urb->status); + return; + } + + mos7720_port = urb->context; + if (!mos7720_port) { + dbg("NULL mos7720_port pointer"); + return ; + } + + dbg("Entering ........."); + + tty = mos7720_port->port->tty; + + if (tty && mos7720_port->open) { + /* let the tty driver wakeup if it has a special * + * write_wakeup function */ + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); + + /* tell the tty driver that something has changed */ + wake_up_interruptible(&tty->write_wait); + } + + /* schedule_work(&mos7720_port->port->work); */ +} + +/* + * send_mos_cmd + * this function will be used for sending command to device + */ +static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, + __u16 index, void *data) +{ + int status; + unsigned int pipe; + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + __u8 requesttype; + __u16 size = 0x0000; + + if (value < MOS_MAX_PORT) { + if (product == MOSCHIP_DEVICE_ID_7715) { + value = value*0x100+0x100; + } else { + value = value*0x100+0x200; + } + } else { + value = 0x0000; + if ((product == MOSCHIP_DEVICE_ID_7715) && + (index != 0x08)) { + dbg("serial->product== MOSCHIP_DEVICE_ID_7715"); + //index = 0x01 ; + } + } + + if (request == MOS_WRITE) { + request = (__u8)MOS_WRITE; + requesttype = (__u8)0x40; + value = value + (__u16)*((unsigned char *)data); + data = NULL; + pipe = usb_sndctrlpipe(serial->dev, 0); + } else { + request = (__u8)MOS_READ; + requesttype = (__u8)0xC0; + size = 0x01; + pipe = usb_rcvctrlpipe(serial->dev,0); + } + + status = usb_control_msg(serial->dev, pipe, request, requesttype, + value, index, data, size, MOS_WDR_TIMEOUT); + + if (status < 0) + dbg("Command Write failed Value %x index %x\n",value,index); + + return status; +} + +static int mos7720_open(struct usb_serial_port *port, struct file * filp) +{ + struct usb_serial *serial; + struct usb_serial_port *port0; + struct urb *urb; + struct moschip_serial *mos7720_serial; + struct moschip_port *mos7720_port; + int response; + int port_number; + char data; + int j; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + port0 = serial->port[0]; + + mos7720_serial = usb_get_serial_data(serial); + + if (mos7720_serial == NULL || port0 == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + /* Initialising the write urb pool */ + for (j = 0; j < NUM_URBS; ++j) { + urb = usb_alloc_urb(0,SLAB_ATOMIC); + mos7720_port->write_urb_pool[j] = urb; + + if (urb == NULL) { + err("No more urbs???"); + continue; + } + + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (!urb->transfer_buffer) { + err("%s-out of memory for urb buffers.", __FUNCTION__); + continue; + } + } + + /* Initialize MCS7720 -- Write Init values to corresponding Registers + * + * Register Index + * 1 : IER + * 2 : FCR + * 3 : LCR + * 4 : MCR + * + * 0x08 : SP1/2 Control Reg + */ + port_number = port->number - port->serial->minor; + send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); + dbg("SS::%p LSR:%x\n",mos7720_port, data); + + dbg("Check:Sending Command .........."); + + data = 0x02; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data); + data = 0x02; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + + data = 0xCF; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + data = 0x03; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x0b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + +/* data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data); + data = 0x03; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); + data = 0x00; + send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); +*/ + data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + + data = data | (port->number - port->serial->minor + 1); + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + data = 0x83; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x03; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + +//Matrix + + /* force low_latency on so that our tty_push actually forces * + * the data through,otherwise it is scheduled, and with * + * high data rates (like with OHCI) data can get lost. */ + + if (port->tty) + port->tty->low_latency = 1; + + /* see if we've set up our endpoint info yet * + * (can't set it up in mos7720_startup as the * + * structures were not set up at that time.) */ + if (!mos7720_serial->interrupt_started) { + dbg("Interrupt buffer NULL !!!"); + + /* not set up yet, so do it now */ + mos7720_serial->interrupt_started = 1; + + dbg("To Submit URB !!!"); + + /* set up our interrupt urb */ + usb_fill_int_urb(port0->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, + port->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + port0->interrupt_in_urb->transfer_buffer_length, + mos7720_interrupt_callback, mos7720_port, + port0->interrupt_in_urb->interval); + + /* start interrupt read for this mos7720 this interrupt * + * will continue as long as the mos7720 is connected */ + dbg("Submit URB over !!!"); + response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL); + if (response) + dev_err(&port->dev, + "%s - Error %d submitting control urb", + __FUNCTION__, response); + } + + /* set up our bulk in urb */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->bulk_in_buffer, + port->read_urb->transfer_buffer_length, + mos7720_bulk_in_callback, mos7720_port); + response = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (response) + dev_err(&port->dev, + "%s - Error %d submitting read urb", __FUNCTION__, response); + + /* initialize our icount structure */ + memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); + + /* initialize our port settings */ + mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ + + /* send a open port command */ + mos7720_port->open = 1; + + return 0; +} + +/* + * mos7720_chars_in_buffer + * this function is called by the tty driver when it wants to know how many + * bytes of data we currently have outstanding in the port (data that has + * been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return a negative error number. + */ +static int mos7720_chars_in_buffer(struct usb_serial_port *port) +{ + int i; + int chars = 0; + struct moschip_port *mos7720_port; + + dbg("%s:entering ...........", __FUNCTION__); + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("%s:leaving ...........", __FUNCTION__); + return -ENODEV; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) + chars += URB_TRANSFER_BUFFER_SIZE; + } + dbg("%s - returns %d", __FUNCTION__, chars); + return chars; +} + +static void mos7720_close(struct usb_serial_port *port, struct file *filp) +{ + struct usb_serial *serial; + struct moschip_port *mos7720_port; + char data; + int j; + + dbg("mos7720_close:entering..."); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + for (j = 0; j < NUM_URBS; ++j) + usb_kill_urb(mos7720_port->write_urb_pool[j]); + + /* Freeing Write URBs */ + for (j = 0; j < NUM_URBS; ++j) { + if (mos7720_port->write_urb_pool[j]) { + kfree(mos7720_port->write_urb_pool[j]->transfer_buffer); + usb_free_urb(mos7720_port->write_urb_pool[j]); + } + } + + /* While closing port, shutdown all bulk read, write * + * and interrupt read if they exists */ + if (serial->dev) { + dbg("Shutdown bulk write"); + usb_kill_urb(port->write_urb); + dbg("Shutdown bulk read"); + usb_kill_urb(port->read_urb); + } + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x04, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x01, &data); + + mos7720_port->open = 0; + + dbg("Leaving %s", __FUNCTION__); +} + +static void mos7720_break(struct usb_serial_port *port, int break_state) +{ + unsigned char data; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + + dbg("Entering %s", __FUNCTION__); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + if (break_state == -1) + data = mos7720_port->shadowLCR | UART_LCR_SBC; + else + data = mos7720_port->shadowLCR & ~UART_LCR_SBC; + + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x03, &data); + + return; +} + +/* + * mos7720_write_room + * this function is called by the tty driver when it wants to know how many + * bytes of data we can accept for a specific port. + * If successful, we return the amount of room that we have for this port + * Otherwise we return a negative error number. + */ +static int mos7720_write_room(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + int room = 0; + int i; + + dbg("%s:entering ...........", __FUNCTION__); + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("%s:leaving ...........", __FUNCTION__); + return -ENODEV; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) + room += URB_TRANSFER_BUFFER_SIZE; + } + + dbg("%s - returns %d", __FUNCTION__, room); + return room; +} + +static int mos7720_write(struct usb_serial_port *port, + const unsigned char *data, int count) +{ + int status; + int i; + int bytes_sent = 0; + int transfer_size; + + struct moschip_port *mos7720_port; + struct usb_serial *serial; + struct urb *urb; + const unsigned char *current_position = data; + + dbg("%s:entering ...........", __FUNCTION__); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("mos7720_port is NULL"); + return -ENODEV; + } + + /* try to find a free urb in the list */ + urb = NULL; + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { + urb = mos7720_port->write_urb_pool[i]; + dbg("URB:%d",i); + break; + } + } + + if (urb == NULL) { + dbg("%s - no more free urbs", __FUNCTION__); + goto exit; + } + + if (urb->transfer_buffer == NULL) { + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (urb->transfer_buffer == NULL) { + err("%s no more kernel memory...", __FUNCTION__); + goto exit; + } + } + transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); + + memcpy(urb->transfer_buffer, current_position, transfer_size); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, + urb->transfer_buffer); + + /* fill urb with data and submit */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + urb->transfer_buffer, transfer_size, + mos7720_bulk_out_data_callback, mos7720_port); + + /* send it down the pipe */ + status = usb_submit_urb(urb,GFP_ATOMIC); + if (status) { + err("%s - usb_submit_urb(write bulk) failed with status = %d", + __FUNCTION__, status); + bytes_sent = status; + goto exit; + } + bytes_sent = transfer_size; + +exit: + return bytes_sent; +} + +static void mos7720_throttle(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + struct tty_struct *tty; + int status; + + dbg("%s- port %d\n", __FUNCTION__, port->number); + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dbg("port not opened"); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = mos7720_write(port, &stop_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7720_port->shadowMCR &= ~UART_MCR_RTS; + status = send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, + UART_MCR, &mos7720_port->shadowMCR); + if (status != 0) + return; + } +} + +static void mos7720_unthrottle(struct usb_serial_port *port) +{ + struct tty_struct *tty; + int status; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = mos7720_write(port, &start_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7720_port->shadowMCR |= UART_MCR_RTS; + status = send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, + UART_MCR, &mos7720_port->shadowMCR); + if (status != 0) + return; + } +} + +static int set_higher_rates(struct moschip_port *mos7720_port, + unsigned int baud) +{ + unsigned char data; + struct usb_serial_port *port; + struct usb_serial *serial; + int port_number; + + if (mos7720_port == NULL) + return -EINVAL; + + port = mos7720_port->port; + serial = port->serial; + + /*********************************************** + * Init Sequence for higher rates + ***********************************************/ + dbg("Sending Setting Commands .........."); + port_number = port->number - port->serial->minor; + + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + data = 0x0CF; + send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data); + data = 0x00b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + data = 0x000; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + + /*********************************************** + * Set for higher rates * + ***********************************************/ + + data = baud * 0x10; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1,&data); + + data = 0x003; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x003; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + data = 0x02b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x02b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + /*********************************************** + * Set DLL/DLM + ***********************************************/ + + data = mos7720_port->shadowLCR | UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + + data = 0x001; /* DLL */ + send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); + data = 0x000; /* DLM */ + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + + data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + + return 0; +} + +/* baud rate information */ +struct divisor_table_entry +{ + __u32 baudrate; + __u16 divisor; +}; + +/* Define table of divisors for moschip 7720 hardware * + * These assume a 3.6864MHz crystal, the standard /16, and * + * MCR.7 = 0. */ +static struct divisor_table_entry divisor_table[] = { + { 50, 2304}, + { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ + { 150, 768}, + { 300, 384}, + { 600, 192}, + { 1200, 96}, + { 1800, 64}, + { 2400, 48}, + { 4800, 24}, + { 7200, 16}, + { 9600, 12}, + { 19200, 6}, + { 38400, 3}, + { 57600, 2}, + { 115200, 1}, +}; + +/***************************************************************************** + * calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int calc_baud_rate_divisor(int baudrate, int *divisor) +{ + int i; + __u16 custom; + __u16 round1; + __u16 round; + + + dbg("%s - %d", __FUNCTION__, baudrate); + + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { + if (divisor_table[i].baudrate == baudrate) { + *divisor = divisor_table[i].divisor; + return 0; + } + } + + /* After trying for all the standard baud rates * + * Try calculating the divisor for this baud rate */ + if (baudrate > 75 && baudrate < 230400) { + /* get the divisor */ + custom = (__u16)(230400L / baudrate); + + /* Check for round off */ + round1 = (__u16)(2304000L / baudrate); + round = (__u16)(round1 - (custom * 10)); + if (round > 4) + custom++; + *divisor = custom; + + dbg("Baud %d = %d",baudrate, custom); + return 0; + } + + dbg("Baud calculation Failed..."); + return -EINVAL; +} + +/* + * send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + */ +static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, + int baudrate) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + int divisor; + int status; + unsigned char data; + unsigned char number; + + if (mos7720_port == NULL) + return -1; + + port = mos7720_port->port; + serial = port->serial; + + dbg("%s: Entering ..........", __FUNCTION__); + + number = port->number - port->serial->minor; + dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate); + + /* Calculate the Divisor */ + status = calc_baud_rate_divisor(baudrate, &divisor); + if (status) { + err("%s - bad baud rate", __FUNCTION__); + return status; + } + + /* Enable access to divisor latch */ + data = mos7720_port->shadowLCR | UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data); + + /* Write the divisor */ + data = ((unsigned char)(divisor & 0xff)); + send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data); + + data = ((unsigned char)((divisor & 0xff00) >> 8)); + send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data); + + /* Disable access to divisor latch */ + data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data); + + return status; +} + +/* + * change_port_settings + * This routine is called to set the UART on the device to match + * the specified new settings. + */ +static void change_port_settings(struct moschip_port *mos7720_port, + struct termios *old_termios) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + struct tty_struct *tty; + int baud; + unsigned cflag; + unsigned iflag; + __u8 mask = 0xff; + __u8 lData; + __u8 lParity; + __u8 lStop; + int status; + int port_number; + char data; + + if (mos7720_port == NULL) + return ; + + port = mos7720_port->port; + serial = port->serial; + port_number = port->number - port->serial->minor; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + tty = mos7720_port->port->tty; + + if ((!tty) || (!tty->termios)) { + dbg("%s - no tty structures", __FUNCTION__); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + lData = UART_LCR_WLEN8; + lStop = 0x00; /* 1 stop bit */ + lParity = 0x00; /* No parity */ + + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + + /* Change the number of bits */ + switch (cflag & CSIZE) { + case CS5: + lData = UART_LCR_WLEN5; + mask = 0x1f; + break; + + case CS6: + lData = UART_LCR_WLEN6; + mask = 0x3f; + break; + + case CS7: + lData = UART_LCR_WLEN7; + mask = 0x7f; + break; + default: + case CS8: + lData = UART_LCR_WLEN8; + break; + } + + /* Change the Parity bit */ + if (cflag & PARENB) { + if (cflag & PARODD) { + lParity = UART_LCR_PARITY; + dbg("%s - parity = odd", __FUNCTION__); + } else { + lParity = (UART_LCR_EPAR | UART_LCR_PARITY); + dbg("%s - parity = even", __FUNCTION__); + } + + } else { + dbg("%s - parity = none", __FUNCTION__); + } + + if (cflag & CMSPAR) + lParity = lParity | 0x20; + + /* Change the Stop bit */ + if (cflag & CSTOPB) { + lStop = UART_LCR_STOP; + dbg("%s - stop bits = 2", __FUNCTION__); + } else { + lStop = 0x00; + dbg("%s - stop bits = 1", __FUNCTION__); + } + +#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ +#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ +#define LCR_PAR_MASK 0x38 /* Mask for parity field */ + + /* Update the LCR with the correct value */ + mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7720_port->shadowLCR |= (lData | lParity | lStop); + + + /* Disable Interrupts */ + data = 0x00; + send_mos_cmd(serial,MOS_WRITE,port->number - port->serial->minor, UART_IER, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + + data = 0xcf; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + + /* Send the updated LCR value to the mos7720 */ + data = mos7720_port->shadowLCR; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data); + + data = 0x00b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + /* set up the MCR register and send it to the mos7720 */ + mos7720_port->shadowMCR = UART_MCR_OUT2; + if (cflag & CBAUD) + mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS); + + if (cflag & CRTSCTS) { + mos7720_port->shadowMCR |= (UART_MCR_XONANY); + + /* To set hardware flow control to the specified * + * serial port, in SP1/2_CONTROL_REG */ + if (port->number) { + data = 0x001; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, + 0x08, &data); + } else { + data = 0x002; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, + 0x08, &data); + } + } else { + mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); + } + + data = mos7720_port->shadowMCR; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data); + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) { + /* pick a default, any default... */ + dbg("Picked default baud..."); + baud = 9600; + } + + if (baud >= 230400) { + set_higher_rates(mos7720_port, baud); + /* Enable Interrupts */ + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); + return; + } + + dbg("%s - baud rate = %d", __FUNCTION__, baud); + status = send_cmd_write_baud_rate(mos7720_port, baud); + + /* Enable Interrupts */ + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); + + if (port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = serial->dev; + + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } + return; +} + +/* + * mos7720_set_termios + * this function is called by the tty driver when it wants to change the + * termios structure. + */ +static void mos7720_set_termios(struct usb_serial_port *port, + struct termios *old_termios) +{ + int status; + unsigned int cflag; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + tty = port->tty; + + if (!port->tty || !port->tty->termios) { + dbg("%s - no tty or termios", __FUNCTION__); + return; + } + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s\n","setting termios - ASPIRE"); + + cflag = tty->termios->c_cflag; + + if (!cflag) { + printk("%s %s\n",__FUNCTION__,"cflag is NULL"); + return; + } + + /* check that they really want us to change something */ + if (old_termios) { + if ((cflag == old_termios->c_cflag) && + (RELEVANT_IFLAG(tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("Nothing to change"); + return; + } + } + + dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + tty->termios->c_cflag, + RELEVANT_IFLAG(tty->termios->c_iflag)); + + if (old_termios) + dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, + RELEVANT_IFLAG(old_termios->c_iflag)); + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* change the port settings to the new ones specified */ + change_port_settings(mos7720_port, old_termios); + + if(!port->read_urb) { + dbg("%s","URB KILLED !!!!!\n"); + return; + } + + if(port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = serial->dev; + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } + return; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + int count; + unsigned int result = 0; + + count = mos7720_chars_in_buffer(mos7720_port->port); + if (count == 0) { + dbg("%s -- Empty", __FUNCTION__); + result = TIOCSER_TEMT; + } + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +/* + * get_number_bytes_avail - get number of bytes available + * + * Purpose: Let user call ioctl to get the count of number of bytes available. + */ +static int get_number_bytes_avail(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + unsigned int result = 0; + struct tty_struct *tty = mos7720_port->port->tty; + + if (!tty) + return -ENOIOCTLCMD; + + result = tty->read_cnt; + + dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result); + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + + return -ENOIOCTLCMD; +} + +static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, + unsigned int __user *value) +{ + unsigned int mcr ; + unsigned int arg; + unsigned char data; + + struct usb_serial_port *port; + + if (mos7720_port == NULL) + return -1; + + port = (struct usb_serial_port*)mos7720_port->port; + mcr = mos7720_port->shadowMCR; + + if (copy_from_user(&arg, value, sizeof(int))) + return -EFAULT; + + switch (cmd) { + case TIOCMBIS: + if (arg & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + break; + + case TIOCMBIC: + if (arg & TIOCM_RTS) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr &= ~UART_MCR_LOOP; + break; + + case TIOCMSET: + /* turn off the RTS and DTR and LOOPBACK + * and then only turn on what was asked to */ + mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP); + mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0); + mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0); + mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0); + break; + } + + mos7720_port->shadowMCR = mcr; + + data = mos7720_port->shadowMCR; + send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, UART_MCR, &data); + + return 0; +} + +static int get_modem_info(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + unsigned int result = 0; + unsigned int msr = mos7720_port->shadowMSR; + unsigned int mcr = mos7720_port->shadowMCR; + + result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ + | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ + | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ + | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */ + | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ + | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ + + + dbg("%s -- %x", __FUNCTION__, result); + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +static int get_serial_info(struct moschip_port *mos7720_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = mos7720_port->port->serial->minor; + tmp.port = mos7720_port->port->number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct moschip_port *mos7720_port; + struct async_icount cnow; + struct async_icount cprev; + struct serial_icounter_struct icount; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + + switch (cmd) { + case TIOCINQ: + /* return number of bytes available */ + dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); + return get_number_bytes_avail(mos7720_port, + (unsigned int __user *)arg); + break; + + case TIOCSERGETLSR: + dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + return get_lsr_info(mos7720_port, (unsigned int __user *)arg); + return 0; + + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, + port->number); + return set_modem_info(mos7720_port, cmd, + (unsigned int __user *)arg); + + case TIOCMGET: + dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); + return get_modem_info(mos7720_port, + (unsigned int __user *)arg); + + case TIOCGSERIAL: + dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + return get_serial_info(mos7720_port, + (struct serial_struct __user *)arg); + + case TIOCSSERIAL: + dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + break; + + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + cprev = mos7720_port->icount; + while (1) { + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = mos7720_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ + break; + + case TIOCGICOUNT: + cnow = mos7720_port->icount; + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + port->number, icount.rx, icount.tx ); + if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; + } + + return -ENOIOCTLCMD; +} + +static int mos7720_startup(struct usb_serial *serial) +{ + struct moschip_serial *mos7720_serial; + struct moschip_port *mos7720_port; + struct usb_device *dev; + int i; + char data; + + dbg("%s: Entering ..........", __FUNCTION__); + + if (!serial) { + dbg("Invalid Handler"); + return -ENODEV; + } + + dev = serial->dev; + + /* create our private serial structure */ + mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL); + if (mos7720_serial == NULL) { + err("%s - Out of memory", __FUNCTION__); + return -ENOMEM; + } + + usb_set_serial_data(serial, mos7720_serial); + + /* we set up the pointers to the endpoints in the mos7720_open * + * function, as the structures aren't created yet. */ + + /* set up port private structures */ + for (i = 0; i < serial->num_ports; ++i) { + mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (mos7720_port == NULL) { + err("%s - Out of memory", __FUNCTION__); + usb_set_serial_data(serial, NULL); + kfree(mos7720_serial); + return -ENOMEM; + } + + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt endpoint + * comman to all ports */ + serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; + + mos7720_port->port = serial->port[i]; + usb_set_serial_port_data(serial->port[i], mos7720_port); + + dbg("port number is %d", serial->port[i]->number); + dbg("serial number is %d", serial->minor); + } + + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + (__u8)0x03, 0x00,0x01,0x00, NULL, 0x00, 5*HZ); + + send_mos_cmd(serial,MOS_READ,0x00, UART_LSR, &data); // LSR For Port 1 + dbg("LSR:%x",data); + + send_mos_cmd(serial,MOS_READ,0x01, UART_LSR, &data); // LSR For Port 2 + dbg("LSR:%x",data); + + return 0; +} + +static void mos7720_shutdown(struct usb_serial *serial) +{ + int i; + + /* free private structure allocated for serial port */ + for (i=0; i < serial->num_ports; ++i) { + kfree(usb_get_serial_port_data(serial->port[i])); + usb_set_serial_port_data(serial->port[i], NULL); + } + + /* free private structure allocated for serial device */ + kfree(usb_get_serial_data(serial)); + usb_set_serial_data(serial, NULL); +} + +static struct usb_serial_driver moschip7720_2port_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "moschip7720", + }, + .description = "Moschip 2 port adapter", + .id_table = moschip_port_id_table, + .num_interrupt_in = 1, + .num_bulk_in = 2, + .num_bulk_out = 2, + .num_ports = 2, + .open = mos7720_open, + .close = mos7720_close, + .throttle = mos7720_throttle, + .unthrottle = mos7720_unthrottle, + .attach = mos7720_startup, + .shutdown = mos7720_shutdown, + .ioctl = mos7720_ioctl, + .set_termios = mos7720_set_termios, + .write = mos7720_write, + .write_room = mos7720_write_room, + .chars_in_buffer = mos7720_chars_in_buffer, + .break_ctl = mos7720_break, + .read_bulk_callback = mos7720_bulk_in_callback, +}; + +static struct usb_driver usb_driver = { + .name = "moschip7720", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = moschip_port_id_table, +}; + +static int __init moschip7720_init(void) +{ + int retval; + + dbg("%s: Entering ..........", __FUNCTION__); + + /* Register with the usb serial */ + retval = usb_serial_register(&moschip7720_2port_driver); + if (retval) + goto failed_port_device_register; + + info(DRIVER_DESC " " DRIVER_VERSION); + + /* Register with the usb */ + retval = usb_register(&usb_driver); + if (retval) + goto failed_usb_register; + + return 0; + +failed_usb_register: + usb_serial_deregister(&moschip7720_2port_driver); + +failed_port_device_register: + return retval; +} + +static void __exit moschip7720_exit(void) +{ + usb_deregister(&usb_driver); + usb_serial_deregister(&moschip7720_2port_driver); +} + +module_init(moschip7720_init); +module_exit(moschip7720_exit); + +/* Module information */ +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit 1.2.3-korg