diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/scsi/aic7xxx/Kconfig.aic79xx | 4 | ||||
| -rw-r--r-- | drivers/scsi/aic7xxx/Kconfig.aic7xxx | 4 | ||||
| -rw-r--r-- | drivers/scsi/arm/arxescsi.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_ct.c | 8 |
5 files changed, 12 insertions, 12 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index dab082002e6fe5..c6dfb6fa13bf41 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -40,10 +40,10 @@ config SCSI_PROC_FS default y ---help--- This option enables support for the various files in - /proc/scsi. In Linux 2.6 this has been superceeded by + /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. - If unusure say Y. + If unsure say Y. comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI @@ -85,7 +85,7 @@ config CHR_DEV_OSST tristate "SCSI OnStream SC-x0 tape support" depends on SCSI ---help--- - The OnStream SC-x0 SCSI tape drives can not be driven by the + The OnStream SC-x0 SCSI tape drives cannot be driven by the standard st driver, but instead need this special osst driver and use the /dev/osstX char device nodes (major 206). Via usb-storage and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx index 7955ebe8e1e8d6..911ea1756e554e 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic79xx +++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx @@ -22,12 +22,12 @@ config AIC79XX_CMDS_PER_DEVICE to be used for any device. The aic7xxx driver will automatically vary this number based on device behavior. For devices with a fixed maximum, the driver will eventually lock to this maximum - and display a console message inidicating this value. + and display a console message indicating this value. Due to resource allocation issues in the Linux SCSI mid-layer, using a high number of commands per device may result in memory allocation failures when many devices are attached to the system. For this reason, - the default is set to 32. Higher values may result in higer performance + the default is set to 32. Higher values may result in higher performance on some devices. The upper bound is 253. 0 disables tagged queueing. Per device tag depth can be controlled via the kernel command line diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx index 5517da5855f003..cd93f9a8611f99 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx +++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx @@ -27,12 +27,12 @@ config AIC7XXX_CMDS_PER_DEVICE to be used for any device. The aic7xxx driver will automatically vary this number based on device behavior. For devices with a fixed maximum, the driver will eventually lock to this maximum - and display a console message inidicating this value. + and display a console message indicating this value. Due to resource allocation issues in the Linux SCSI mid-layer, using a high number of commands per device may result in memory allocation failures when many devices are attached to the system. For this reason, - the default is set to 32. Higher values may result in higer performance + the default is set to 32. Higher values may result in higher performance on some devices. The upper bound is 253. 0 disables tagged queueing. Per device tag depth can be controlled via the kernel command line diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c index a2894015670309..4385e9e3ded68a 100644 --- a/drivers/scsi/arm/arxescsi.c +++ b/drivers/scsi/arm/arxescsi.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/drivers/scsi/arxescsi.c + * linux/drivers/scsi/arm/arxescsi.c * * Copyright (C) 1997-2000 Russell King, Stefan Hanske * diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index ae410645899189..1b53afb1cb5768 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -933,8 +933,8 @@ lpfc_fdmi_cmd(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, int cmdcode) ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size); ae->ad.bits.AttrType = be16_to_cpu(OS_NAME_VERSION); sprintf(ae->un.OsNameVersion, "%s %s %s", - system_utsname.sysname, system_utsname.release, - system_utsname.version); + init_utsname()->sysname, init_utsname()->release, + init_utsname()->version); len = strlen(ae->un.OsNameVersion); len += (len & 3) ? (4 - (len & 3)) : 4; ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len); @@ -1052,7 +1052,7 @@ lpfc_fdmi_cmd(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, int cmdcode) size); ae->ad.bits.AttrType = be16_to_cpu(HOST_NAME); sprintf(ae->un.HostName, "%s", - system_utsname.nodename); + init_utsname()->nodename); len = strlen(ae->un.HostName); len += (len & 3) ? (4 - (len & 3)) : 4; ae->ad.bits.AttrLen = @@ -1140,7 +1140,7 @@ lpfc_fdmi_tmo_handler(struct lpfc_hba *phba) ndlp = lpfc_findnode_did(phba, NLP_SEARCH_ALL, FDMI_DID); if (ndlp) { - if (system_utsname.nodename[0] != '\0') { + if (init_utsname()->nodename[0] != '\0') { lpfc_fdmi_cmd(phba, ndlp, SLI_MGMT_DHBA); } else { mod_timer(&phba->fc_fdmitmo, jiffies + HZ * 60); |