diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 1074 |
1 files changed, 483 insertions, 591 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 10b8c8c25325a..65077f39da699 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -34,6 +33,63 @@ #include "e1000_hw.h" +static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static void e1000_release_software_semaphore(struct e1000_hw *hw); + +static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); +static int32_t e1000_check_downshift(struct e1000_hw *hw); +static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); +static void e1000_clear_hw_cntrs(struct e1000_hw *hw); +static void e1000_clear_vfta(struct e1000_hw *hw); +static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); +static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank); +static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +static int32_t e1000_get_software_flag(struct e1000_hw *hw); +static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw); +static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout); +static int32_t e1000_id_led_init(struct e1000_hw *hw); +static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static void e1000_init_rx_addrs(struct e1000_hw *hw); +static void e1000_initialize_hardware_bits(struct e1000_hw *hw); +static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum); +static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); +static int32_t e1000_mng_write_commit(struct e1000_hw *hw); +static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); +static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data); +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data); +static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data); +static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data); +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static void e1000_release_software_flag(struct e1000_hw *hw); +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); +static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +static int32_t e1000_wait_autoneg(struct e1000_hw *hw); +static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); static int32_t e1000_set_phy_type(struct e1000_hw *hw); static void e1000_phy_init_script(struct e1000_hw *hw); static int32_t e1000_setup_copper_link(struct e1000_hw *hw); @@ -70,69 +126,10 @@ static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); -static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); -static int32_t e1000_check_downshift(struct e1000_hw *hw); -static int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity); -static void e1000_clear_hw_cntrs(struct e1000_hw *hw); -static void e1000_clear_vfta(struct e1000_hw *hw); -static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); -static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, - boolean_t link_up); -static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); -static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); -static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); -static int32_t e1000_get_cable_length(struct e1000_hw *hw, - uint16_t *min_length, - uint16_t *max_length); -static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); -static void e1000_init_rx_addrs(struct e1000_hw *hw); -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_wait_autoneg(struct e1000_hw *hw); - -static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, - uint32_t value); - -#define E1000_WRITE_REG_IO(a, reg, val) \ - e1000_write_reg_io((a), E1000_##reg, val) static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); -static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, - uint32_t segment); -static int32_t e1000_get_software_flag(struct e1000_hw *hw); -static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); -static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t* data); -static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, - uint16_t *data); -static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t *data); -static void e1000_release_software_flag(struct e1000_hw *hw); -static void e1000_release_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, - uint32_t no_snoop); -static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, - uint32_t index, uint8_t byte); -static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t data); -static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t data); - /* IGP cable length table */ static const uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = @@ -156,13 +153,12 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; - /****************************************************************************** * Set the phy type member in the hw struct. * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); @@ -208,7 +204,6 @@ e1000_set_phy_type(struct e1000_hw *hw) return E1000_SUCCESS; } - /****************************************************************************** * IGP phy init script - initializes the GbE PHY * @@ -667,19 +662,12 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: - case e1000_80003es2lan: + default: + /* Auto read done will delay 5ms or poll based on mac type */ ret_val = e1000_get_auto_rd_done(hw); if (ret_val) - /* We don't want to continue accessing MAC registers. */ return ret_val; break; - default: - /* Wait for EEPROM reload (it happens automatically) */ - msleep(5); - break; } /* Disable HW ARPs on ASF enabled adapters */ @@ -722,6 +710,123 @@ e1000_reset_hw(struct e1000_hw *hw) } /****************************************************************************** + * + * Initialize a number of hardware-dependent bits + * + * hw: Struct containing variables accessed by shared code + * + * This function contains hardware limitation workarounds for PCI-E adapters + * + *****************************************************************************/ +static void +e1000_initialize_hardware_bits(struct e1000_hw *hw) +{ + if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { + /* Settings common to all PCI-express silicon */ + uint32_t reg_ctrl, reg_ctrl_ext; + uint32_t reg_tarc0, reg_tarc1; + uint32_t reg_tctl; + uint32_t reg_txdctl, reg_txdctl1; + + /* link autonegotiation/sync workarounds */ + reg_tarc0 = E1000_READ_REG(hw, TARC0); + reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + + /* Enable not-done TX descriptor counting */ + reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); + reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1); + reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + /* Clear PHY TX compatible mode bits */ + reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tarc1 &= ~((1 << 30)|(1 << 29)); + + /* link autonegotiation/sync workarounds */ + reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23)); + + /* TX ring control fixes */ + reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_82573: + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext &= ~(1 << 23); + reg_ctrl_ext |= (1 << 22); + + /* TX byte count fix */ + reg_ctrl = E1000_READ_REG(hw, CTRL); + reg_ctrl &= ~(1 << 29); + + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + E1000_WRITE_REG(hw, CTRL, reg_ctrl); + break; + case e1000_80003es2lan: + /* improve small packet performace for fiber/serdes */ + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { + reg_tarc0 &= ~(1 << 20); + } + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_ich8lan: + /* Reduce concurrent DMA requests to 3 from 4 */ + if ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) + reg_tarc0 |= ((1 << 29)|(1 << 28)); + + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext |= (1 << 22); + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + + /* workaround TX hang with TSO=on */ + reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + /* workaround TX hang with TSO=on */ + reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + default: + break; + } + + E1000_WRITE_REG(hw, TARC0, reg_tarc0); + } +} + +/****************************************************************************** * Performs basic configuration of the adapter. * * hw - Struct containing variables accessed by shared code @@ -749,14 +854,13 @@ e1000_init_hw(struct e1000_hw *hw) DEBUGFUNC("e1000_init_hw"); /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ - if (hw->mac_type == e1000_ich8lan) { - reg_data = E1000_READ_REG(hw, TARC0); - reg_data |= 0x30000000; - E1000_WRITE_REG(hw, TARC0, reg_data); - - reg_data = E1000_READ_REG(hw, STATUS); - reg_data &= ~0x80000000; - E1000_WRITE_REG(hw, STATUS, reg_data); + if ((hw->mac_type == e1000_ich8lan) && + ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { + reg_data = E1000_READ_REG(hw, STATUS); + reg_data &= ~0x80000000; + E1000_WRITE_REG(hw, STATUS, reg_data); } /* Initialize Identification LED */ @@ -769,6 +873,9 @@ e1000_init_hw(struct e1000_hw *hw) /* Set the media type and TBI compatibility */ e1000_set_media_type(hw); + /* Must be called after e1000_set_media_type because media_type is used */ + e1000_initialize_hardware_bits(hw); + /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ @@ -860,17 +967,6 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - switch (hw->mac_type) { - default: - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_ich8lan: - case e1000_80003es2lan: - ctrl |= E1000_TXDCTL_COUNT_DESC; - break; - } E1000_WRITE_REG(hw, TXDCTL, ctrl); } @@ -908,8 +1004,6 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_ich8lan: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - if (hw->mac_type >= e1000_82571) - ctrl |= E1000_TXDCTL_COUNT_DESC; E1000_WRITE_REG(hw, TXDCTL1, ctrl); break; } @@ -1018,11 +1112,11 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if (hw->fc == e1000_fc_default) { + if (hw->fc == E1000_FC_DEFAULT) { switch (hw->mac_type) { case e1000_ich8lan: case e1000_82573: - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; default: ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, @@ -1032,12 +1126,12 @@ e1000_setup_link(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; } } @@ -1047,10 +1141,10 @@ e1000_setup_link(struct e1000_hw *hw) * hub or switch with different Flow Control capabilities. */ if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~e1000_fc_tx_pause); + hw->fc &= (~E1000_FC_TX_PAUSE); if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~e1000_fc_rx_pause); + hw->fc &= (~E1000_FC_RX_PAUSE); hw->original_fc = hw->fc; @@ -1102,7 +1196,7 @@ e1000_setup_link(struct e1000_hw *hw) * ability to transmit pause frames in not enabled, then these * registers will be set to 0. */ - if (!(hw->fc & e1000_fc_tx_pause)) { + if (!(hw->fc & E1000_FC_TX_PAUSE)) { E1000_WRITE_REG(hw, FCRTL, 0); E1000_WRITE_REG(hw, FCRTH, 0); } else { @@ -1149,11 +1243,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); - /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be + /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. - * If we're on serdes media, adjust the output amplitude to value set in - * the EEPROM. + * If we're on serdes media, adjust the output amplitude to value + * set in the EEPROM. */ ctrl = E1000_READ_REG(hw, CTRL); if (hw->media_type == e1000_media_type_fiber) @@ -1189,11 +1283,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: /* Flow control is completely disabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: /* RX Flow control is enabled and TX Flow control is disabled by a * software over-ride. Since there really isn't a way to advertise * that we are capable of RX Pause ONLY, we will advertise that we @@ -1202,13 +1296,13 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: /* TX Flow control is enabled, and RX Flow control is disabled, by a * software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; - case e1000_fc_full: + case E1000_FC_FULL: /* Flow control (both RX and TX) is enabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; @@ -2124,13 +2218,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * in the EEPROM is used. */ switch (hw->fc) { - case e1000_fc_none: /* 0 */ + case E1000_FC_NONE: /* 0 */ /* Flow control (RX & TX) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_rx_pause: /* 1 */ + case E1000_FC_RX_PAUSE: /* 1 */ /* RX Flow control is enabled, and TX Flow control is * disabled, by a software over-ride. */ @@ -2142,14 +2236,14 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_tx_pause: /* 2 */ + case E1000_FC_TX_PAUSE: /* 2 */ /* TX Flow control is enabled, and RX Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; - case e1000_fc_full: /* 3 */ + case E1000_FC_FULL: /* 3 */ /* Flow control (both RX and TX) is enabled by a software * over-ride. */ @@ -2193,7 +2287,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_force_speed_duplex"); /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT1("hw->fc = %d\n", hw->fc); @@ -2547,18 +2641,18 @@ e1000_force_mac_fc(struct e1000_hw *hw) */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: ctrl &= (~E1000_CTRL_TFCE); ctrl |= E1000_CTRL_RFCE; break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: ctrl &= (~E1000_CTRL_RFCE); ctrl |= E1000_CTRL_TFCE; break; - case e1000_fc_full: + case E1000_FC_FULL: ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: @@ -2657,14 +2751,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ /* Are both PAUSE bits set to 1? If so, this implies @@ -2676,7 +2770,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | e1000_fc_full + * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && @@ -2687,11 +2781,11 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->original_fc == e1000_fc_full) { - hw->fc = e1000_fc_full; + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; DEBUGOUT("Flow Control = FULL.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } } @@ -2700,14 +2794,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. @@ -2715,14 +2809,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be @@ -2745,13 +2839,13 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->original_fc == e1000_fc_none || - hw->original_fc == e1000_fc_tx_pause) || + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || hw->fc_strict_ieee) { - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT("Flow Control = NONE.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } @@ -2766,7 +2860,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. @@ -3417,9 +3511,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_read_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, +static int32_t +e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data) { uint32_t i; @@ -3499,8 +3592,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, * data - data to write to the PHY ******************************************************************************/ int32_t -e1000_write_phy_reg(struct e1000_hw *hw, - uint32_t reg_addr, +e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data) { uint32_t ret_val; @@ -3557,10 +3649,9 @@ e1000_write_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_write_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, - uint16_t phy_data) +static int32_t +e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t phy_data) { uint32_t i; uint32_t mdic = 0; @@ -3711,7 +3802,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) swfw = E1000_SWFW_PHY0_SM; } if (e1000_swfw_sync_acquire(hw, swfw)) { - e1000_release_software_semaphore(hw); + DEBUGOUT("Unable to acquire swfw sync\n"); return -E1000_ERR_SWFW_SYNC; } /* Read the device control register and assert the E1000_CTRL_PHY_RST @@ -3734,6 +3825,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if (hw->mac_type >= e1000_82571) mdelay(10); + e1000_swfw_sync_release(hw, swfw); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR @@ -3792,15 +3884,14 @@ e1000_phy_reset(struct e1000_hw *hw) if (ret_val) return E1000_SUCCESS; - switch (hw->mac_type) { - case e1000_82541_rev_2: - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: + switch (hw->phy_type) { + case e1000_phy_igp: + case e1000_phy_igp_2: + case e1000_phy_igp_3: + case e1000_phy_ife: ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; - break; default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); @@ -3936,7 +4027,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; @@ -3945,6 +4036,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + if (hw->phy_id != 0) + return E1000_SUCCESS; + /* The 82571 firmware may still be configuring the PHY. In this * case, we cannot access the PHY until the configuration is done. So * we explicitly set the PHY values. */ @@ -4061,7 +4155,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity, min_length, max_length, average; + uint16_t phy_data, min_length, max_length, average; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_igp_get_info"); @@ -4086,8 +4181,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & IGP01E1000_PSSR_MDIX) >> - IGP01E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >> + IGP01E1000_PSSR_MDIX_SHIFT); if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -4096,10 +4191,12 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; /* Get cable length */ ret_val = e1000_get_cable_length(hw, &min_length, &max_length); @@ -4135,7 +4232,8 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_ife_get_info"); @@ -4146,8 +4244,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; phy_info->polarity_correction = - (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> - IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT; + ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> + IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { ret_val = e1000_check_polarity(hw, &polarity); @@ -4155,8 +4254,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, return ret_val; } else { /* Polarity is forced. */ - polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >> - IFE_PSC_FORCE_POLARITY_SHIFT; + polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >> + IFE_PSC_FORCE_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } phy_info->cable_polarity = polarity; @@ -4164,9 +4264,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = - (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> - IFE_PMC_MDIX_MODE_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode) + ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> + IFE_PMC_MDIX_MODE_SHIFT); return E1000_SUCCESS; } @@ -4182,7 +4282,8 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_m88_get_info"); @@ -4195,11 +4296,14 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, return ret_val; phy_info->extended_10bt_distance = - (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> - M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT; + ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> + M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? + e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal; + phy_info->polarity_correction = - (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> - M88E1000_PSCR_POLARITY_REVERSAL_SHIFT; + ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> + M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; /* Check polarity status */ ret_val = e1000_check_polarity(hw, &polarity); @@ -4211,15 +4315,15 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >> - M88E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >> + M88E1000_PSSR_MDIX_SHIFT); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { /* Cable Length Estimation and Local/Remote Receiver Information * are only valid at 1000 Mbps. */ if (hw->phy_type != e1000_phy_gg82563) { - phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT); } else { ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, @@ -4227,18 +4331,20 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH; + phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH); } ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; } return E1000_SUCCESS; @@ -4441,7 +4547,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eewr = FALSE; break; case e1000_ich8lan: - { + { int32_t i = 0; uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); @@ -4468,7 +4574,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) hw->flash_bank_size /= 2 * sizeof(uint16_t); break; - } + } default: break; } @@ -4800,7 +4906,7 @@ e1000_release_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw) { uint16_t retry_count = 0; @@ -4854,44 +4960,43 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; - int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { - DEBUGOUT("\"words\" parameter out of bounds\n"); + DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size); return -E1000_ERR_EEPROM; } - /* FLASH reads without acquiring the semaphore are safe */ + /* EEPROM's that don't use EERD to read require us to bit-bang the SPI + * directly. In this case, we need to acquire the EEPROM so that + * FW or other port software does not interrupt. + */ if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && hw->eeprom.use_eerd == FALSE) { - switch (hw->mac_type) { - case e1000_80003es2lan: - break; - default: - /* Prepare the EEPROM for reading */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - break; - } + /* Prepare the EEPROM for bit-bang reading */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; } - if (eeprom->use_eerd == TRUE) { - ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); - if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || - (hw->mac_type != e1000_82573)) - e1000_release_eeprom(hw); - return ret_val; - } + /* Eerd register EEPROM access requires no eeprom aquire/release */ + if (eeprom->use_eerd == TRUE) + return e1000_read_eeprom_eerd(hw, offset, words, data); + /* ICH EEPROM access is done via the ICH flash controller */ if (eeprom->type == e1000_eeprom_ich8) return e1000_read_eeprom_ich8(hw, offset, words, data); + /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have + * acquired the EEPROM at this point, so any returns should relase it */ if (eeprom->type == e1000_eeprom_spi) { uint16_t word_in; uint8_t read_opcode = EEPROM_READ_OPCODE_SPI; @@ -5206,6 +5311,10 @@ e1000_write_eeprom(struct e1000_hw *hw, DEBUGFUNC("e1000_write_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -5248,7 +5357,7 @@ e1000_write_eeprom(struct e1000_hw *hw, * data - pointer to array of 8 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5314,7 +5423,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, * data - pointer to array of 16 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5411,10 +5520,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) int32_t error = E1000_SUCCESS; uint32_t old_bank_offset = 0; uint32_t new_bank_offset = 0; - uint32_t sector_retries = 0; uint8_t low_byte = 0; uint8_t high_byte = 0; - uint8_t temp_byte = 0; boolean_t sector_write_failed = FALSE; if (hw->mac_type == e1000_82573) { @@ -5467,41 +5574,46 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) e1000_erase_ich8_4k_segment(hw, 0); } - do { - sector_write_failed = FALSE; - /* Loop for every byte in the shadow RAM, - * which is in units of words. */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified == TRUE) { - low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &temp_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, - low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = FALSE; + /* Loop for every byte in the shadow RAM, + * which is in units of words. */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + /* Determine whether to write the value stored + * in the other NVM bank or a modified value stored + * in the shadow RAM */ + if (hw->eeprom_shadow_ram[i].modified == TRUE) { + low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { high_byte = (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, - &temp_byte); - udelay(100); - } else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &low_byte); udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + } + } else { + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, + &low_byte); + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, &high_byte); + udelay(100); } + } + /* If the write of the low byte was successful, go ahread and + * write the high byte while checking to make sure that if it + * is the signature byte, then it is handled properly */ + if (sector_write_failed == FALSE) { /* If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the @@ -5512,45 +5624,45 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset + 1, high_byte); + (i << 1) + new_bank_offset + 1, high_byte); if (error != E1000_SUCCESS) sector_write_failed = TRUE; - if (sector_write_failed == FALSE) { - /* Clear the now not used entry in the cache */ - hw->eeprom_shadow_ram[i].modified = FALSE; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } + } else { + /* If the write failed then break from the loop and + * return an error */ + break; } + } - /* Don't bother writing the segment valid bits if sector - * programming failed. */ - if (sector_write_failed == FALSE) { - /* Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ - e1000_read_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - &high_byte); - high_byte &= 0xBF; + /* Don't bother writing the segment valid bits if sector + * programming failed. */ + if (sector_write_failed == FALSE) { + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b */ + e1000_read_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + &high_byte); + high_byte &= 0xBF; + error = e1000_verify_write_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase */ + if (error == E1000_SUCCESS) { error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - high_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); + } - /* And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, - 0); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + /* Clear the now not used entry in the cache */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } - } while (++sector_retries < 10 && sector_write_failed == TRUE); + } } return error; @@ -5640,99 +5752,6 @@ e1000_init_rx_addrs(struct e1000_hw *hw) } /****************************************************************************** - * Updates the MAC's list of multicast addresses. - * - * hw - Struct containing variables accessed by shared code - * mc_addr_list - the list of new multicast addresses - * mc_addr_count - number of addresses - * pad - number of bytes between addresses in the list - * rar_used_count - offset where to start adding mc addresses into the RAR's - * - * The given list replaces any existing list. Clears the last 15 receive - * address registers and the multicast table. Uses receive address registers - * for the first 15 multicast addresses, and hashes the rest into the - * multicast table. - *****************************************************************************/ -#if 0 -void -e1000_mc_addr_list_update(struct e1000_hw *hw, - uint8_t *mc_addr_list, - uint32_t mc_addr_count, - uint32_t pad, - uint32_t rar_used_count) -{ - uint32_t hash_value; - uint32_t i; - uint32_t num_rar_entry; - uint32_t num_mta_entry; - - DEBUGFUNC("e1000_mc_addr_list_update"); - - /* Set the new number of MC addresses that we are being requested to use. */ - hw->num_mc_addrs = mc_addr_count; - - /* Clear RAR[1-15] */ - DEBUGOUT(" Clearing RAR[1-15]\n"); - num_rar_entry = E1000_RAR_ENTRIES; - if (hw->mac_type == e1000_ich8lan) - num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN; - /* Reserve a spot for the Locally Administered Address to work around - * an 82571 issue in which a reset on one port will reload the MAC on - * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) - num_rar_entry -= 1; - - for (i = rar_used_count; i < num_rar_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(hw); - } - - /* Clear the MTA */ - DEBUGOUT(" Clearing MTA\n"); - num_mta_entry = E1000_NUM_MTA_REGISTERS; - if (hw->mac_type == e1000_ich8lan) - num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN; - for (i = 0; i < num_mta_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); - E1000_WRITE_FLUSH(hw); - } - - /* Add the new addresses */ - for (i = 0; i < mc_addr_count; i++) { - DEBUGOUT(" Adding the multicast addresses:\n"); - DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad)], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 1], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 2], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 3], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 4], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 5]); - - hash_value = e1000_hash_mc_addr(hw, - mc_addr_list + - (i * (ETH_LENGTH_OF_ADDRESS + pad))); - - DEBUGOUT1(" Hash value = 0x%03X\n", hash_value); - - /* Place this multicast address in the RAR if there is room, * - * else put it in the MTA - */ - if (rar_used_count < num_rar_entry) { - e1000_rar_set(hw, - mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), - rar_used_count); - rar_used_count++; - } else { - e1000_mta_set(hw, hash_value); - } - } - DEBUGOUT("MC Update Complete\n"); -} -#endif /* 0 */ - -/****************************************************************************** * Hashes an address to determine its location in the multicast table * * hw - Struct containing variables accessed by shared code @@ -6290,7 +6309,7 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile uint32_t temp; @@ -6539,6 +6558,8 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, void e1000_get_bus_info(struct e1000_hw *hw) { + int32_t ret_val; + uint16_t pci_ex_link_status; uint32_t status; switch (hw->mac_type) { @@ -6548,18 +6569,25 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_1; + ret_val = e1000_read_pcie_cap_reg(hw, + PCI_EX_LINK_STATUS, + &pci_ex_link_status); + if (ret_val) + hw->bus_width = e1000_bus_width_unknown; + else + hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >> + PCI_EX_LINK_WIDTH_SHIFT; break; - case e1000_82571: case e1000_ich8lan: - case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_4; + hw->bus_width = e1000_bus_width_pciex_1; break; default: status = E1000_READ_REG(hw, STATUS); @@ -6593,25 +6621,6 @@ e1000_get_bus_info(struct e1000_hw *hw) break; } } -/****************************************************************************** - * Reads a value from one of the devices registers using port I/O (as opposed - * memory mapped I/O). Only 82544 and newer devices support port I/O. - * - * hw - Struct containing variables accessed by shared code - * offset - offset to read from - *****************************************************************************/ -#if 0 -uint32_t -e1000_read_reg_io(struct e1000_hw *hw, - uint32_t offset) -{ - unsigned long io_addr = hw->io_base; - unsigned long io_data = hw->io_base + 4; - - e1000_io_write(hw, io_addr, offset); - return e1000_io_read(hw, io_data); -} -#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -6633,7 +6642,6 @@ e1000_write_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_data, value); } - /****************************************************************************** * Estimates the cable length. * @@ -6842,7 +6850,7 @@ e1000_get_cable_length(struct e1000_hw *hw, *****************************************************************************/ static int32_t e1000_check_polarity(struct e1000_hw *hw, - uint16_t *polarity) + e1000_rev_polarity *polarity) { int32_t ret_val; uint16_t phy_data; @@ -6856,8 +6864,10 @@ e1000_check_polarity(struct e1000_hw *hw, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> - M88E1000_PSSR_REV_POLARITY_SHIFT; + *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> + M88E1000_PSSR_REV_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; + } else if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { @@ -6879,19 +6889,22 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; /* Check the polarity bits */ - *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? 1 : 0; + *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } else { /* For 10 Mbps, read the polarity bit in the status register. (for * 100 Mbps this bit is always 0) */ - *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED; + *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >> - IFE_PESC_POLARITY_REVERSED_SHIFT; + *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >> + IFE_PESC_POLARITY_REVERSED_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } return E1000_SUCCESS; } @@ -7259,7 +7272,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7369,7 +7382,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7475,7 +7488,7 @@ e1000_set_vco_speed(struct e1000_hw *hw) * * returns: - E1000_SUCCESS . ****************************************************************************/ -int32_t +static int32_t e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) { uint8_t i; @@ -7686,7 +7699,7 @@ e1000_check_mng_mode(struct e1000_hw *hw) ****************************************************************************/ int32_t e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, - uint16_t length) + uint16_t length) { int32_t ret_val; struct e1000_host_mng_command_header hdr; @@ -7716,7 +7729,7 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, * * returns - checksum of buffer contents. ****************************************************************************/ -uint8_t +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length) { uint8_t sum = 0; @@ -7914,32 +7927,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, ctrl); } -/*************************************************************************** - * - * Enables PCI-Express master access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - none. - * - ***************************************************************************/ -#if 0 -void -e1000_enable_pciex_master(struct e1000_hw *hw) -{ - uint32_t ctrl; - - DEBUGFUNC("e1000_enable_pciex_master"); - - if (hw->bus_type != e1000_bus_type_pci_express) - return; - - ctrl = E1000_READ_REG(hw, CTRL); - ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; - E1000_WRITE_REG(hw, CTRL, ctrl); -} -#endif /* 0 */ - /******************************************************************************* * * Disables PCI-Express master access and verifies there are no pending requests @@ -8063,7 +8050,6 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) msleep(1); timeout--; } - if (!timeout) { DEBUGOUT("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; @@ -8172,8 +8158,9 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_get_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return E1000_SUCCESS; + } while (timeout) { swsm = E1000_READ_REG(hw, SWSM); @@ -8206,8 +8193,9 @@ e1000_release_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_release_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return; + } swsm = E1000_READ_REG(hw, SWSM); /* Release the SW semaphores.*/ @@ -8241,7 +8229,7 @@ e1000_check_phy_reset_block(struct e1000_hw *hw) if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; + E1000_BLK_PHY_RESET : E1000_SUCCESS; } static uint8_t @@ -8377,66 +8365,6 @@ e1000_release_software_flag(struct e1000_hw *hw) return; } -/*************************************************************************** - * - * Disable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_disable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - -/*************************************************************************** - * - * Enable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_enable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - /****************************************************************************** * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access * register. @@ -8832,20 +8760,22 @@ static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) { int32_t error = E1000_SUCCESS; - int32_t program_retries; - uint8_t temp_byte; + int32_t program_retries = 0; - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index); - for (program_retries = 0; program_retries < 100; program_retries++) { - e1000_read_ich8_byte(hw, index, &temp_byte); - if (temp_byte == byte) - break; - udelay(10); - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + error = e1000_write_ich8_byte(hw, index, byte); + + if (error != E1000_SUCCESS) { + for (program_retries = 0; program_retries < 100; program_retries++) { + DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index); + error = e1000_write_ich8_byte(hw, index, byte); + udelay(100); + if (error == E1000_SUCCESS) + break; + } } + if (program_retries == 100) error = E1000_ERR_EEPROM; @@ -8886,39 +8816,27 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) } /****************************************************************************** - * Writes a word to the NVM using the ICH8 flash access registers. + * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0 + * based. * * hw - pointer to e1000_hw structure - * index - The starting byte index of the word to read. - * data - The word to write to the NVM. - *****************************************************************************/ -#if 0 -int32_t -e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) -{ - int32_t status = E1000_SUCCESS; - status = e1000_write_ich8_data(hw, index, 2, data); - return status; -} -#endif /* 0 */ - -/****************************************************************************** - * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. - * segment N is 4096 * N + flash_reg_addr. + * bank - 0 for first bank, 1 for second bank * - * hw - pointer to e1000_hw structure - * segment - 0 for first segment, 1 for second segment, etc. + * Note that this function may actually erase as much as 8 or 64 KBytes. The + * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the + * bank size may be 4, 8 or 64 KBytes *****************************************************************************/ -static int32_t -e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) +int32_t +e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; uint32_t flash_linear_address; int32_t count = 0; int32_t error = E1000_ERR_EEPROM; - int32_t iteration, seg_size; - int32_t sector_size; + int32_t iteration; + int32_t sub_sector_size = 0; + int32_t bank_size; int32_t j = 0; int32_t error_flag = 0; @@ -8927,22 +8845,27 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ /* 00: The Hw sector is 256 bytes, hence we need to erase 16 * consecutive sectors. The start index for the nth Hw sector can be - * calculated as = segment * 4096 + n * 256 + * calculated as bank * 4096 + n * 256 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. * The start index for the nth Hw sector can be calculated - * as = segment * 4096 - * 10: Error condition - * 11: The Hw sector size is much bigger than the size asked to - * erase...error condition */ + * as bank * 4096 + * 10: The HW sector is 8K bytes + * 11: The Hw sector size is 64K bytes */ if (hsfsts.hsf_status.berasesz == 0x0) { /* Hw sector size 256 */ - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256; + sub_sector_size = ICH8_FLASH_SEG_SIZE_256; + bank_size = ICH8_FLASH_SECTOR_SIZE; iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; } else if (hsfsts.hsf_status.berasesz == 0x1) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K; + bank_size = ICH8_FLASH_SEG_SIZE_4K; + iteration = 1; + } else if (hw->mac_type != e1000_ich8lan && + hsfsts.hsf_status.berasesz == 0x2) { + /* 8K erase size invalid for ICH8 - added in for ICH9 */ + bank_size = ICH9_FLASH_SEG_SIZE_8K; iteration = 1; } else if (hsfsts.hsf_status.berasesz == 0x3) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K; + bank_size = ICH8_FLASH_SEG_SIZE_64K; iteration = 1; } else { return error; @@ -8966,16 +8889,15 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) /* Write the last 24 bits of an index within the block into Flash * Linear address field in Flash Address. This probably needs to - * be calculated here based off the on-chip segment size and the - * software segment size assumed (4K) */ - /* TBD */ - flash_linear_address = segment * sector_size + j * seg_size; - flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + * be calculated here based off the on-chip erase sector size and + * the software bank size (4, 8 or 64 KBytes) */ + flash_linear_address = bank * bank_size + j * sub_sector_size; flash_linear_address += hw->flash_base_addr; + flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, 1000000); + error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_ERASE_TIMEOUT); /* Check if FCERR is set to 1. If 1, clear it and try the whole * sequence a few more times else Done */ if (error == E1000_SUCCESS) { @@ -8999,44 +8921,6 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) return error; } -/****************************************************************************** - * - * Reverse duplex setting without breaking the link. - * - * hw: Struct containing variables accessed by shared code - * - *****************************************************************************/ -#if 0 -int32_t -e1000_duplex_reversal(struct e1000_hw *hw) -{ - int32_t ret_val; - uint16_t phy_data; - - if (hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data ^= MII_CR_FULL_DUPLEX; - - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET; - ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data); - - return ret_val; -} -#endif /* 0 */ - static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size) @@ -9071,6 +8955,14 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, } +/****************************************************************************** + * This function initializes the PHY from the NVM on ICH8 platforms. This + * is needed due to an issue where the NVM configuration is not properly + * autoloaded after power transitions. Therefore, after each PHY reset, we + * will load the configuration data out of the NVM manually. + * + * hw: Struct containing variables accessed by shared code + *****************************************************************************/ static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw) { |