diff options
Diffstat (limited to 'drivers/net/e1000/e1000_ethtool.c')
| -rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 111 |
1 files changed, 85 insertions, 26 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8eae8ba27e84d..c88f1a3c1b1db 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + uint16_t eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); + + /* EEPROM image version # is reported as firware version # for + * 8257{1|2|3} controllers */ + e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); + switch (adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + case e1000_82573: + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + break; + default: + sprintf(firmware_version, "n/a"); + } + + strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->n_stats = E1000_STATS_LEN; drvinfo->testinfo_len = E1000_TEST_LEN; @@ -960,13 +979,21 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) } } - if(txdr->desc) + if(txdr->desc) { pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma); - if(rxdr->desc) + txdr->desc = NULL; + } + if(rxdr->desc) { pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); + rxdr->desc = NULL; + } kfree(txdr->buffer_info); + txdr->buffer_info = NULL; + kfree(rxdr->buffer_info); + rxdr->buffer_info = NULL; + return; } @@ -1301,21 +1328,32 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { uint32_t rctl; + struct e1000_hw *hw = &adapter->hw; - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { - if(adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac_type) { + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); - else { - rctl = E1000_READ_REG(&adapter->hw, RCTL); + break; + case e1000_82571: + case e1000_82572: +#define E1000_SERDES_LB_ON 0x410 + e1000_set_phy_loopback(adapter); + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); + msec_delay(10); + return 0; + break; + default: + rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); return 0; } - } else if(adapter->hw.media_type == e1000_media_type_copper) + } else if (hw->media_type == e1000_media_type_copper) return e1000_set_phy_loopback(adapter); return 7; @@ -1326,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) { uint32_t rctl; uint16_t phy_reg; + struct e1000_hw *hw = &adapter->hw; rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if(adapter->hw.media_type == e1000_media_type_copper || - ((adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) && - (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3))) { - adapter->hw.autoneg = TRUE; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg & MII_CR_LOOPBACK) { + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes){ +#define E1000_SERDES_LB_OFF 0x400 + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); + msec_delay(10); + break; + } + /* fall thru for Cu adapters */ + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + default: + hw->autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); - e1000_phy_reset(&adapter->hw); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + e1000_phy_reset(hw); } + break; } } @@ -1440,9 +1489,11 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data) { if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback; - if((*data = e1000_setup_loopback_test(adapter))) goto err_loopback; + if((*data = e1000_setup_loopback_test(adapter))) + goto err_loopback_setup; *data = e1000_run_loopback_test(adapter); e1000_loopback_cleanup(adapter); +err_loopback_setup: e1000_free_desc_rings(adapter); err_loopback: return *data; @@ -1671,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); } + else if(adapter->hw.mac_type < e1000_82573) { + E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); + msleep_interruptible(data * 1000); + } else { E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | |