diff options
Diffstat (limited to 'arch/powerpc')
96 files changed, 8597 insertions, 588 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a0dd1b0ee4838..8b6910465578b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -338,10 +338,6 @@ config PPC_MULTIPLATFORM RS/6000 machine, an Apple machine, or a PReP, CHRP, Maple or Cell-based machine. -config PPC_ISERIES - bool "IBM Legacy iSeries" - depends on PPC64 - config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" depends on PPC32 && (BROKEN||BROKEN_ON_SMP) @@ -355,6 +351,16 @@ config APUS <http://linux-apus.sourceforge.net/>. endchoice +config QUICC_ENGINE + bool + depends on PPC_MPC836x || PPC_MPC832x + default y + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + config PPC_PSERIES depends on PPC_MULTIPLATFORM && PPC64 bool "IBM pSeries & new (POWER5-based) iSeries" @@ -365,6 +371,10 @@ config PPC_PSERIES select PPC_UDBG_16550 default y +config PPC_ISERIES + bool "IBM Legacy iSeries" + depends on PPC_MULTIPLATFORM && PPC64 + config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines" depends on PPC_MULTIPLATFORM && PPC32 @@ -594,6 +604,7 @@ endmenu source arch/powerpc/platforms/embedded6xx/Kconfig source arch/powerpc/platforms/4xx/Kconfig +source arch/powerpc/platforms/82xx/Kconfig source arch/powerpc/platforms/83xx/Kconfig source arch/powerpc/platforms/85xx/Kconfig source arch/powerpc/platforms/86xx/Kconfig @@ -1002,7 +1013,7 @@ config CONSISTENT_START_BOOL depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE help This option allows you to set the base virtual address - of the the consistent memory pool. This pool of virtual + of the consistent memory pool. This pool of virtual memory is used to make consistent memory allocations. config CONSISTENT_START @@ -1013,7 +1024,7 @@ config CONSISTENT_SIZE_BOOL bool "Set custom consistent memory pool size" depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE help - This option allows you to set the size of the the + This option allows you to set the size of the consistent memory pool. This pool of virtual memory is used to make consistent memory allocations. @@ -1058,6 +1069,8 @@ source "fs/Kconfig" # XXX source "arch/ppc/8260_io/Kconfig" +source "arch/powerpc/sysdev/qe_lib/Kconfig" + source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" @@ -1069,7 +1082,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on PPC64 && EXPERIMENTAL && MODULES + depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 01667d1d571db..a00fe72365556 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -20,6 +20,7 @@ CROSS32_COMPILE ?= CROSS32CC := $(CROSS32_COMPILE)gcc CROSS32AS := $(CROSS32_COMPILE)as CROSS32LD := $(CROSS32_COMPILE)ld +CROSS32AR := $(CROSS32_COMPILE)ar CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy ifeq ($(HAS_BIARCH),y) @@ -28,10 +29,11 @@ CROSS32CC := $(CC) -m32 CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) +CROSS32AR := $(AR) endif endif -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY KBUILD_DEFCONFIG := $(shell uname -m)_defconfig @@ -146,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin +BOOT_TARGETS = zImage zImage.initrd uImage PHONY += $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e73774136b558..003520b56303e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,33 +20,34 @@ # CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE # in the toplevel makefile. +all: $(obj)/zImage HOSTCC := gcc BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc -OBJCOPYFLAGS := contents,alloc,load,readonly,data -OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000 -OBJCOPY_MIB_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment + +ifeq ($(call cc-option-yn, -fstack-protector),y) +BOOTCFLAGS += -fno-stack-protector +endif + +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h) +$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ + $(addprefix $(obj)/,$(zlibheader)) + +src-wlib := string.S stdio.c main.c div64.S $(zlib) +src-plat := of.c +src-boot := crt0.S $(src-wlib) $(src-plat) empty.c -src-boot-$(CONFIG_PPC_MULTIPLATFORM) := of.c -src-boot := crt0.S string.S stdio.c main.c div64.S $(src-boot-y) -src-boot += $(zlib) src-boot := $(addprefix $(obj)/, $(src-boot)) obj-boot := $(addsuffix .o, $(basename $(src-boot))) - -ifeq ($(call cc-option-yn, -fstack-protector),y) -BOOTCFLAGS += -fno-stack-protector -endif - -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) +obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) quiet_cmd_copy_zlib = COPY $@ cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ @@ -66,8 +67,14 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) -clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) +$(obj)/empty.c: + @touch $@ + +$(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S + @cp $< $@ +clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(obj)/empty.c quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< @@ -75,146 +82,97 @@ quiet_cmd_bootcc = BOOTCC $@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< -quiet_cmd_bootld = BOOTLD $@ - cmd_bootld = $(CROSS32LD) -T $(srctree)/$(src)/$(3) -o $@ $(2) +quiet_cmd_bootar = BOOTAR $@ + cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@ $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S $(call if_changed_dep,bootas) -#----------------------------------------------------------- -# ELF sections within the zImage bootloader/wrapper -#----------------------------------------------------------- -required := vmlinux.strip -initrd := initrd +$(obj)/wrapper.a: $(obj-wlib) + $(call cmd,bootar) -obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) -src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) -gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) +hostprogs-y := addnote addRamDisk hack-coff -hostprogs-y := addnote addRamDisk hack-coff +extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ + $(obj)/zImage.lds $(obj)/zImage.coff.lds -targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \ - zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \ - $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ - vmlinux.initrd dummy.o -extra-y := initrd.o +wrapper :=$(srctree)/$(src)/wrapper +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff) -quiet_cmd_ramdisk = RAMDISK $@ - cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ +############# +# Bits for building various flavours of zImage -quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ +ifneq ($(CROSS32_COMPILE),) +CROSSWRAP := -C $(CROSS32_COMPILE) +else +ifneq ($(CROSS_COMPILE),) +CROSSWRAP := -C $(CROSS_COMPILE) +endif +endif -vmlinux.strip: vmlinux - $(call if_changed,stripvm) -$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz - $(call if_changed,ramdisk) +quiet_cmd_wrap = WRAP $@ + cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux +quiet_cmd_wrap_initrd = WRAP $@ + cmd_wrap_initrd =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ + -i $(obj)/ramdisk.image.gz vmlinux -quiet_cmd_addsection = ADDSEC $@ - cmd_addsection = $(CROSS32OBJCOPY) $@ \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) +$(obj)/zImage.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap,chrp) -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(obj)/addnote $@ +$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,chrp) -quiet_cmd_gen-miboot = GEN $@ - cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \ - --add-section=$1=$(word 2, $^) $< $@ +$(obj)/zImage.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap,pseries) -quiet_cmd_gencoff = COFF $@ - cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \ - $(obj)/hack-coff $@ +$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pseries) -$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % - $(call if_changed,gzip) +$(obj)/zImage.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap,pmac) -$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz - cp -f $(obj)/ramdisk.image.gz $@ +$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmac) -$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz - @touch $@ +$(obj)/zImage.coff: vmlinux $(wrapperbits) + $(call cmd,wrap,pmaccoff) -$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c - $(call if_changed_dep,bootcc) - $(call cmd,addsection) +$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmaccoff) + +$(obj)/zImage.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap,miboot) -$(obj)/zImage.vmode $(obj)/zImage.coff: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,miboot) -$(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/uImage: vmlinux $(wrapperbits) + $(call cmd,wrap,uboot) + +image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_MAPLE) += zImage.pseries +image-$(CONFIG_PPC_CELL) += zImage.pseries +image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_PMAC) += zImage.pmac +image-$(CONFIG_DEFAULT_UIMAGE) += uImage # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. -coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff -coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff -mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image -mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.initrd.image - -$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \ - $(mibootimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \ - $(coffrdimg-y-y) $(mibrdimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz - $(call cmd,gen-miboot,image) - -$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz - $(call cmd,gen-miboot,initrd) - -#----------------------------------------------------------- -# build u-boot images -#----------------------------------------------------------- -quiet_cmd_mygzip = GZIP $@ -cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ - -quiet_cmd_objbin = OBJCOPY $@ - cmd_objbin = $(OBJCOPY) -O binary $< $@ - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ - -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ - -MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets += uImage -extra-y += vmlinux.bin vmlinux.gz - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objbin) - -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,mygzip) - -$(obj)/uImage: $(obj)/vmlinux.gz - $(Q)rm -f $@ - $(call cmd,uimage) - @echo -n ' Image: $@ ' - @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi - -install: $(CONFIGURE) $(BOOTIMAGE) - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" - -clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip) +ifeq ($(CONFIG_PPC32),y) +image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot +endif + +initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y)) + +$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) + @rm -f $@; ln $< $@ +$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) + @rm -f $@; ln $< $@ + +install: $(CONFIGURE) $(image-y) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $< + +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz) +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz) diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts new file mode 100644 index 0000000000000..34efdd028c4f0 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -0,0 +1,223 @@ +/* + * MPC8272 ADS Device Tree Source + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8272ADS"; + compatible = "MPC8260ADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + interrupt-controller@f8200000 { + linux,phandle = <f8200000>; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <f8200000 f8200004>; + built-in; + device_type = "pci-pic"; + }; + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 4000000 f4500000 00000020>; + }; + + soc8272@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = < 0 0 2 00000000 f0000000 00053000>; + reg = <f0000000 0>; + + mdio@0 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <0 0>; + linux,phandle = <24520>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <10c00>; + interrupts = <19 1>; + reg = <0>; + bitbang = [ 12 12 13 02 02 01 ]; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <10c00>; + interrupts = <19 1>; + bitbang = [ 12 12 13 02 02 01 ]; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + device-id = <2>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11300 20 8400 100 11380 30>; + mac-address = [ 00 11 2F 99 43 54 ]; + interrupts = <20 2>; + interrupt-parent = <10c00>; + phy-handle = <2452000>; + rx-clock = <13>; + tx-clock = <12>; + }; + + ethernet@25000 { + device_type = "network"; + device-id = <3>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11320 20 8500 100 113b0 30>; + mac-address = [ 00 11 2F 99 44 54 ]; + interrupts = <21 2>; + interrupt-parent = <10c00>; + phy-handle = <2452001>; + rx-clock = <17>; + tx-clock = <18>; + }; + + cpm@f0000000 { + linux,phandle = <f0000000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <00000000 00000000 3ffff>; + reg = <10d80 3280>; + command-proc = <119c0>; + brg-frequency = <17D7840>; + cpm_clk = <BEBC200>; + + scc@11a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <2>; + reg = <11a00 20 8000 100>; + current-speed = <1c200>; + interrupts = <28 2>; + interrupt-parent = <10c00>; + clock-setup = <0 00ffffff>; + rx-clock = <1>; + tx-clock = <1>; + }; + + scc@11a60 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <5>; + reg = <11a60 20 8300 100>; + current-speed = <1c200>; + interrupts = <2b 2>; + interrupt-parent = <10c00>; + clock-setup = <1b ffffff00>; + rx-clock = <4>; + tx-clock = <4>; + }; + + }; + interrupt-controller@10c00 { + linux,phandle = <10c00>; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM2"; + }; + pci@0500 { + linux,phandle = <0500>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "8272"; + device_type = "pci"; + reg = <10430 4dc>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x16 */ + b000 0 0 1 f8200000 40 0 + b000 0 0 2 f8200000 41 0 + b000 0 0 3 f8200000 42 0 + b000 0 0 4 f8200000 43 0 + + /* IDSEL 0x17 */ + b800 0 0 1 f8200000 43 0 + b800 0 0 2 f8200000 40 0 + b800 0 0 3 f8200000 41 0 + b800 0 0 4 f8200000 42 0 + + /* IDSEL 0x18 */ + c000 0 0 1 f8200000 42 0 + c000 0 0 2 f8200000 43 0 + c000 0 0 3 f8200000 40 0 + c000 0 0 4 f8200000 41 0>; + interrupt-parent = <10c00>; + interrupts = <14 3>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 40000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; + +/* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 0>; + interrupt-parent = <10c00>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; +/* desc mask is for rev1.x, we need runtime fixup for >=2.x */ + descriptor-types-mask = <01010ebf>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts new file mode 100644 index 0000000000000..9022192155b95 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8360emds.dts @@ -0,0 +1,375 @@ +/* + * MPC8360E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8360EPB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <3EF1480>; + bus-frequency = <FBC5200>; + clock-frequency = <1F78A400>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = <f8000000 8000>; + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <FBC5200>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <f 8>; + interrupt-parent = <700>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <FBC5200>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <FBC5200>; + interrupts = <a 8>; + interrupt-parent = <700>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 8>; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ + descriptor-types-mask = <01010ebf>; + }; + + pci@8500 { + linux,phandle = <8500>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = <140001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + ucc_pin@02 { + linux,phandle = <140002>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 11 1 0 1 0 /* TxD0 */ + 0 12 1 0 1 0 /* TxD1 */ + 0 13 1 0 1 0 /* TxD2 */ + 0 14 1 0 1 0 /* TxD3 */ + 1 2 1 0 1 0 /* TxD4 */ + 1 3 1 0 2 0 /* TxD5 */ + 1 5 1 0 3 0 /* TxD6 */ + 1 8 1 0 3 0 /* TxD7 */ + 0 17 2 0 1 0 /* RxD0 */ + 0 18 2 0 1 0 /* RxD1 */ + 0 19 2 0 1 0 /* RxD2 */ + 0 1a 2 0 1 0 /* RxD3 */ + 0 1b 2 0 1 0 /* RxD4 */ + 1 c 2 0 2 0 /* RxD5 */ + 1 d 2 0 3 0 /* RxD6 */ + 1 b 2 0 2 0 /* RxD7 */ + 0 15 1 0 1 0 /* TX_EN */ + 0 16 1 0 1 0 /* TX_ER */ + 0 1d 2 0 1 0 /* RX_DV */ + 0 1e 2 0 1 0 /* RX_ER */ + 0 1f 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0>; /* MDC */ + }; + + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = <e0100000 480>; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + usb@6c0 { + device_type = "usb"; + compatible = "qe_udc"; + reg = <6c0 40 8B00 100>; + interrupts = <b>; + interrupt-parent = <80>; + mode = "slave"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = <140001>; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = <140002>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = <700>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts new file mode 100644 index 0000000000000..2b168486aeba9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -0,0 +1,302 @@ +/* + * MPC8560 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8560ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <04ead9a0>; + bus-frequency = <13ab6680>; + clock-frequency = <312c8040>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + soc8560@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <13ab6680>; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 0C 00 00 FD ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 0C 00 01 FD ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + pci@8000 { + linux,phandle = <8000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "85xx"; + device_type = "pci"; + reg = <8000 400>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 12 */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 13 */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 14*/ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 15 */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 18 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 19 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 20 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 21 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + + interrupt-parent = <40000>; + interrupts = <42 0>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; + + pic@40000 { + linux,phandle = <40000>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 20100>; + built-in; + device_type = "open-pic"; + }; + + cpm@e0000000 { + linux,phandle = <e0000000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <0 0 c0000>; + reg = <80000 40000>; + command-proc = <919c0>; + brg-frequency = <9d5b340>; + + pic@90c00 { + linux,phandle = <90c00>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 0>; + interrupt-parent = <40000>; + reg = <90c00 80>; + built-in; + device_type = "cpm-pic"; + }; + + scc@91a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <1>; + reg = <91a00 20 88000 100>; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <1c200>; + interrupts = <64 1>; + interrupt-parent = <90c00>; + }; + + scc@91a20 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <2>; + reg = <91a20 20 88100 100>; + clock-setup = <ff00ffff 90000>; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <1c200>; + interrupts = <65 1>; + interrupt-parent = <90c00>; + }; + + fcc@91320 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <2>; + reg = <91320 20 88500 100 913a0 30>; + mac-address = [ 00 00 0C 00 02 FD ]; + clock-setup = <ff00ffff 250000>; + rx-clock = <15>; + tx-clock = <16>; + interrupts = <5d 1>; + interrupt-parent = <90c00>; + phy-handle = <2452002>; + }; + + fcc@91340 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <3>; + reg = <91340 20 88600 100 913d0 30>; + mac-address = [ 00 00 0C 00 03 FD ]; + clock-setup = <ffff00ff 3700>; + rx-clock = <17>; + tx-clock = <18>; + interrupts = <5e 1>; + interrupt-parent = <90c00>; + phy-handle = <2452003>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper new file mode 100755 index 0000000000000..eab7318729e93 --- /dev/null +++ b/arch/powerpc/boot/wrapper @@ -0,0 +1,204 @@ +#!/bin/sh + +# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org> +# This program may be used under the terms of version 2 of the GNU +# General Public License. + +# This script takes a kernel binary and optionally an initrd image +# and/or a device-tree blob, and creates a bootable zImage for a +# given platform. + +# Options: +# -o zImage specify output file +# -p platform specify platform (links in $platform.o) +# -i initrd specify initrd file +# -d devtree specify device-tree blob +# -s tree.dts specify device-tree source file (needs dtc installed) +# -c cache $kernel.strip.gz (use if present & newer, else make) +# -C prefix specify command prefix for cross-building tools +# (strip, objcopy, ld) +# -D dir specify directory containing data files used by script +# (default ./arch/powerpc/boot) +# -W dir specify working directory for temporary files (default .) + +# defaults +kernel= +ofile=zImage +platform=of +initrd= +dtb= +dts= +cacheit= + +# cross-compilation prefix +CROSS= + +# directory for object and other files used by this script +object=arch/powerpc/boot + +# directory for working files +tmpdir=. + +usage() { + echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 + echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2 + echo ' [-D datadir] [-W workingdir] [vmlinux]' >&2 + exit 1 +} + +while [ "$#" -gt 0 ]; do + case "$1" in + -o) + shift + [ "$#" -gt 0 ] || usage + ofile="$1" + ;; + -p) + shift + [ "$#" -gt 0 ] || usage + platform="$1" + ;; + -i) + shift + [ "$#" -gt 0 ] || usage + initrd="$1" + ;; + -d) + shift + [ "$#" -gt 0 ] || usage + dtb="$1" + ;; + -s) + shift + [ "$#" -gt 0 ] || usage + dts="$1" + ;; + -c) + cacheit=y + ;; + -C) + shift + [ "$#" -gt 0 ] || usage + CROSS="$1" + ;; + -D) + shift + [ "$#" -gt 0 ] || usage + object="$1" + ;; + -W) + shift + [ "$#" -gt 0 ] || usage + tmpdir="$1" + ;; + -?) + usage + ;; + *) + [ -z "$kernel" ] || usage + kernel="$1" + ;; + esac + shift +done + +if [ -n "$dts" ]; then + if [ -z "$dtb" ]; then + dtb="$platform.dtb" + fi + dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1 +fi + +if [ -z "$kernel" ]; then + kernel=vmlinux +fi + +platformo=$object/"$platform".o +lds=$object/zImage.lds +ext=strip +objflags=-S +tmp=$tmpdir/zImage.$$.o +ksection=.kernel:vmlinux.strip +isection=.kernel:initrd + +case "$platform" in +pmac|pseries|chrp) + platformo=$object/of.o + ;; +pmaccoff) + platformo=$object/of.o + lds=$object/zImage.coff.lds + ;; +miboot|uboot) + # miboot and U-boot want just the bare bits, not an ELF binary + ext=bin + objflags="-O binary" + tmp="$ofile" + ksection=image + isection=initrd + ;; +esac + +vmz="$tmpdir/`basename \"$kernel\"`.$ext" +if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then + ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + gzip -f -9 "$vmz.$$" + if [ -n "$cacheit" ]; then + mv -f "$vmz.$$.gz" "$vmz.gz" + else + vmz="$vmz.$$" + fi +fi + +case "$platform" in +uboot) + rm -f "$ofile" + version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \ + cut -d' ' -f3` + if [ -n "$version" ]; then + version="-n Linux-$version" + fi + mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + $version -d "$vmz.gz" "$ofile" + if [ -z "$cacheit" ]; then + rm -f $vmz.gz + fi + exit 0 + ;; +esac + +addsec() { + ${CROSS}objcopy $4 $1 \ + --add-section=$3="$2" \ + --set-section-flags=$3=contents,alloc,load,readonly,data +} + +addsec $tmp "$vmz.gz" $ksection $object/empty.o +if [ -z "$cacheit" ]; then + rm -f "$vmz.gz" +fi + +if [ -n "$initrd" ]; then + addsec $tmp "$initrd" initrd +fi + +if [ -n "$dtb" ]; then + addsec $tmp "$dtb" dtb +fi + +if [ "$platform" != "miboot" ]; then + ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \ + $object/crt0.o $platformo $tmp $object/wrapper.a + rm $tmp +fi + +# post-processing needed for some platforms +case "$platform" in +pseries|chrp) + $object/addnote "$ofile" + ;; +pmaccoff) + ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile" + $object/hack-coff "$ofile" + ;; +esac diff --git a/arch/powerpc/boot/zImage.coff.lds b/arch/powerpc/boot/zImage.coff.lds.S index 6016251a1a2c7..05f32388b9530 100644 --- a/arch/powerpc/boot/zImage.coff.lds +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -15,6 +15,7 @@ SECTIONS { *(.rodata*) *(.data*) + *(__builtin_*) *(.sdata*) __got2_start = .; *(.got2) diff --git a/arch/powerpc/boot/zImage.lds b/arch/powerpc/boot/zImage.lds.S index 4b6bb3ffe3dcb..4b6bb3ffe3dcb 100644 --- a/arch/powerpc/boot/zImage.lds +++ b/arch/powerpc/boot/zImage.lds.S diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index bbf2b5f8a8cbe..fee72f8a2fb76 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -492,7 +492,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 4b9c2ed925f50..92d0a9dd0b8f6 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -490,23 +490,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index eb0885ea07317..d58f82f836f82 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -475,7 +475,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 719fba4eb4210..d1811e754518d 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -413,23 +413,23 @@ CONFIG_BLK_DEV_SD=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -CONFIG_SCSI_SATA_MV=y -# CONFIG_SCSI_SATA_NV is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 8da6a47f03390..cd3535e1a0955 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc6 -# Sun Sep 10 10:28:05 2006 +# Linux kernel version: 2.6.18 +# Mon Sep 25 19:41:14 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y CONFIG_DEFAULT_UIMAGE=y # @@ -61,25 +62,25 @@ CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y +CONFIG_SYSCTL=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -259,7 +260,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -313,6 +313,7 @@ CONFIG_MTD_CHAR=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -464,23 +465,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=y -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -1277,11 +1278,11 @@ CONFIG_PLIST=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1293,15 +1294,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y -CONFIG_SERIAL_TEXT_DEBUG=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1314,6 +1315,8 @@ CONFIG_SERIAL_TEXT_DEBUG=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1323,6 +1326,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc8360emds_defconfig new file mode 100644 index 0000000000000..c0703415d6084 --- /dev/null +++ b/arch/powerpc/configs/mpc8360emds_defconfig @@ -0,0 +1,1018 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18 +# Thu Sep 21 18:14:27 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_SYSCTL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +CONFIG_MPC8360E_PB=y +CONFIG_PPC_MPC836x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_NAPI is not set +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# QE Options +# +# CONFIG_UCC_SLOW is not set +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig new file mode 100644 index 0000000000000..ddc2a7b07ba0e --- /dev/null +++ b/arch/powerpc/configs/mpc8560_ads_defconfig @@ -0,0 +1,854 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-rc4 +# Fri Aug 11 16:45:05 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_MPIC=y +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC8560_ADS=y +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8560=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_PC_KEYBOARD is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DEBUG=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +CONFIG_SERIAL_CPM_SCC2=y +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 6861dde7d77bc..765c8bb90ddd1 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -682,7 +682,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -1826,7 +1826,7 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 7517d0c5303fc..be11df7c11aa4 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -520,23 +520,23 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index a8cdf312e1b0f..44175fb7adecc 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -506,7 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 190a57e207654..47a613cdd775c 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -763,10 +763,10 @@ struct cpu_spec cpu_specs[] = { .cpu_setup = __setup_cpu_603, .platform = "ppc603", }, - { /* e300 (a 603e core, plus some) on 83xx */ + { /* e300c1 (a 603e core, plus some) on 83xx */ .pvr_mask = 0x7fff0000, .pvr_value = 0x00830000, - .cpu_name = "e300", + .cpu_name = "e300c1", .cpu_features = CPU_FTRS_E300, .cpu_user_features = COMMON_USER, .icache_bsize = 32, @@ -774,6 +774,17 @@ struct cpu_spec cpu_specs[] = { .cpu_setup = __setup_cpu_603, .platform = "ppc603", }, + { /* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */ + .pvr_mask = 0x7fff0000, + .pvr_value = 0x00840000, + .cpu_name = "e300c2", + .cpu_features = CPU_FTRS_E300, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_603, + .platform = "ppc603", + }, { /* default match, we assume split I/D cache & TB (non-601)... */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 2cd872b5283b7..748e74fcf541f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -27,10 +27,7 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif +#include <asm/firmware.h> /* * System calls. @@ -91,6 +88,7 @@ system_call_common: ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION /* Hack for handling interrupts when soft-enabling on iSeries */ cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ andi. r10,r12,MSR_PR /* from kernel */ @@ -98,6 +96,7 @@ system_call_common: beq hardware_interrupt_entry lbz r10,PACAPROCENABLED(r13) std r10,SOFTE(r1) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mfmsr r11 ori r11,r11,MSR_EE @@ -462,6 +461,7 @@ _GLOBAL(ret_from_except_lite) restore: #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r5,SOFTE(r1) cmpdi 0,r5,0 beq 4f @@ -480,6 +480,7 @@ restore: b .ret_from_except_lite /* loop back and handle more */ 4: stb r5,PACAPROCENABLED(r13) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif ld r3,_MSR(r1) @@ -538,18 +539,23 @@ do_work: lwz r8,TI_PREEMPT(r9) cmpwi cr1,r8,0 #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r0,SOFTE(r1) cmpdi r0,0 -#else - andi. r0,r3,MSR_EE +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif +BEGIN_FW_FTR_SECTION + andi. r0,r3,MSR_EE +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) crandc eq,cr1*4+eq,eq bne restore /* here we are preempting the current task */ 1: #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION li r0,1 stb r0,PACAPROCENABLED(r13) +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 3065b472b95db..645c7f10fb283 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -33,6 +33,7 @@ #include <asm/hvcall.h> #include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> +#include <asm/firmware.h> #ifdef CONFIG_PPC_ISERIES #define DO_SOFT_DISABLE @@ -365,19 +366,28 @@ label##_iSeries: \ #ifdef DO_SOFT_DISABLE #define DISABLE_INTS \ +BEGIN_FW_FTR_SECTION; \ lbz r10,PACAPROCENABLED(r13); \ li r11,0; \ std r10,SOFTE(r1); \ mfmsr r10; \ stb r11,PACAPROCENABLED(r13); \ ori r10,r10,MSR_EE; \ - mtmsrd r10,1 + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #define ENABLE_INTS \ +BEGIN_FW_FTR_SECTION; \ lbz r10,PACAPROCENABLED(r13); \ mfmsr r11; \ std r10,SOFTE(r1); \ ori r11,r11,MSR_EE; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \ +BEGIN_FW_FTR_SECTION; \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ mtmsrd r11,1 #else /* hard enable/disable interrupts */ @@ -1071,8 +1081,10 @@ _GLOBAL(slb_miss_realmode) ld r3,PACA_EXSLB+EX_R3(r13) lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION ld r11,PACALPPACAPTR(r13) ld r11,LPPACASRR0(r11) /* get SRR0 value */ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ mtlr r10 @@ -1087,8 +1099,10 @@ _GLOBAL(slb_miss_realmode) .machine pop #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) @@ -1301,6 +1315,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) cmpdi r3,0 /* see if hash_page succeeded */ #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION /* * If we had interrupts soft-enabled at the point where the * DSI/ISI occurred, and an interrupt came in during hash_page, @@ -1321,12 +1336,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) ld r3,SOFTE(r1) bl .local_irq_restore b 11f -#else +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif +BEGIN_FW_FTR_SECTION beq fast_exception_return /* Return from exception on success */ ble- 12f /* Failure return from hash_page */ /* fall through */ -#endif +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* Here we have a page fault that hash_page can't handle. */ _GLOBAL(handle_page_fault) @@ -1861,7 +1878,9 @@ _GLOBAL(__secondary_start) LOAD_REG_ADDR(r3, .start_secondary_prolog) LOAD_REG_IMMEDIATE(r4, MSR_KERNEL) #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION ori r4,r4,MSR_EE +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -1986,6 +2005,7 @@ _STATIC(start_here_common) */ li r3,0 bl .do_cpu_ftr_fixups + bl .do_fw_ftr_fixups /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) @@ -2000,11 +2020,13 @@ _STATIC(start_here_common) /* Load up the kernel context */ 5: #ifdef DO_SOFT_DISABLE +BEGIN_FW_FTR_SECTION li r5,0 stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ mfmsr r5 ori r5,r5,MSR_EE /* Hard Enabled */ mtmsrd r5 +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif bl .start_kernel diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index b4432332341fc..c3f58f2f9f525 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -777,7 +777,6 @@ unsigned int irq_alloc_virt(struct irq_host *host, { unsigned long flags; unsigned int i, j, found = NO_IRQ; - unsigned int limit = irq_virq_count - count; if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS)) return NO_IRQ; @@ -794,14 +793,16 @@ unsigned int irq_alloc_virt(struct irq_host *host, /* Look for count consecutive numbers in the allocatable * (non-legacy) space */ - for (i = NUM_ISA_INTERRUPTS; i <= limit; ) { - for (j = i; j < (i + count); j++) - if (irq_map[j].host != NULL) { - i = j + 1; - continue; - } - found = i; - break; + for (i = NUM_ISA_INTERRUPTS, j = 0; i < irq_virq_count; i++) { + if (irq_map[i].host != NULL) + j = 0; + else + j++; + + if (j == count) { + found = i - count + 1; + break; + } } if (found == NO_IRQ) { spin_unlock_irqrestore(&irq_big_lock, flags); diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index cd65c367b8b6d..7b8d12b9026c4 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -259,14 +259,15 @@ void kretprobe_trampoline_holder(void) */ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { - struct kretprobe_instance *ri = NULL; - struct hlist_head *head; - struct hlist_node *node, *tmp; + struct kretprobe_instance *ri = NULL; + struct hlist_head *head, empty_rp; + struct hlist_node *node, *tmp; unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + INIT_HLIST_HEAD(&empty_rp); spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + head = kretprobe_inst_table_head(current); /* * It is possible to have multiple instances associated with a given @@ -277,20 +278,20 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * We can handle this because: * - instances are always inserted at the head of the list * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the + * function, the first instance's ret_addr will point to the * real return address, and all the rest will point to * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) + if (ri->task != current) /* another task is sharing our hash bucket */ - continue; + continue; if (ri->rp && ri->rp->handler) ri->rp->handler(ri, regs); orig_ret_address = (unsigned long)ri->ret_addr; - recycle_rp_inst(ri); + recycle_rp_inst(ri, &empty_rp); if (orig_ret_address != trampoline_address) /* @@ -308,12 +309,16 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we don't want the post_handler - * to run (and have re-enabled preemption) - */ - return 1; + hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_del(&ri->hlist); + kfree(ri); + } + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; } /* diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 58758d8833619..88fd73fdf048a 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -843,7 +843,7 @@ _GLOBAL(kernel_thread) addi r1,r1,16 blr -_GLOBAL(execve) +_GLOBAL(kernel_execve) li r0,__NR_execve sc bnslr diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e3ed21cd3d945..41521b30c3cdd 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -325,6 +325,52 @@ _GLOBAL(do_cpu_ftr_fixups) isync b 1b +/* + * do_fw_ftr_fixups - goes through the list of firmware feature fixups + * and writes nop's over sections of code that don't apply for this firmware. + * r3 = data offset (not changed) + */ +_GLOBAL(do_fw_ftr_fixups) + /* Get firmware features */ + LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features) + sub r6,r6,r3 + ld r4,0(r6) + /* Get the fixup table */ + LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup) + sub r6,r6,r3 + LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup) + sub r7,r7,r3 + /* Do the fixup */ +1: cmpld r6,r7 + bgelr + addi r6,r6,32 + ld r8,-32(r6) /* mask */ + and r8,r8,r4 + ld r9,-24(r6) /* value */ + cmpld r8,r9 + beq 1b + ld r8,-16(r6) /* section begin */ + ld r9,-8(r6) /* section end */ + subf. r9,r8,r9 + beq 1b + /* write nops over the section of code */ + /* todo: if large section, add a branch at the start of it */ + srwi r9,r9,2 + mtctr r9 + sub r8,r8,r3 + lis r0,0x60000000@h /* nop */ +3: stw r0,0(r8) +BEGIN_FTR_SECTION + dcbst 0,r8 /* suboptimal, but simpler */ + sync + icbi 0,r8 +END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE) + addi r8,r8,4 + bdnz 3b + sync /* additional sync needed on g4 */ + isync + b 1b + #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* * Do an IO access in real mode @@ -556,7 +602,7 @@ _GLOBAL(giveup_altivec) #endif /* CONFIG_ALTIVEC */ -_GLOBAL(execve) +_GLOBAL(kernel_execve) li r0,__NR_execve sc bnslr diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index c1b1e14775e41..78d3c0fc8dfbf 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -30,6 +30,7 @@ #include <asm/byteorder.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> +#include <asm/firmware.h> #ifdef DEBUG #include <asm/udbg.h> @@ -209,7 +210,6 @@ void pcibios_free_controller(struct pci_controller *phb) kfree(phb); } -#ifndef CONFIG_PPC_ISERIES void __devinit pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -238,10 +238,12 @@ static void __init pcibios_claim_of_setup(void) { struct pci_bus *b; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return; + list_for_each_entry(b, &pci_root_buses, node) pcibios_claim_one_bus(b); } -#endif #ifdef CONFIG_PPC_MULTIPLATFORM static u32 get_int_prop(struct device_node *np, const char *name, u32 def) @@ -554,9 +556,8 @@ static int __init pcibios_init(void) */ ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; -#ifdef CONFIG_PPC_ISERIES - iSeries_pcibios_init(); -#endif + if (firmware_has_feature(FW_FEATURE_ISERIES)) + iSeries_pcibios_init(); printk(KERN_DEBUG "PCI: Probing PCI hardware\n"); @@ -566,15 +567,15 @@ static int __init pcibios_init(void) pci_bus_add_devices(hose->bus); } -#ifndef CONFIG_PPC_ISERIES - if (pci_probe_only) - pcibios_claim_of_setup(); - else - /* FIXME: `else' will be removed when - pci_assign_unassigned_resources() is able to work - correctly with [partially] allocated PCI tree. */ - pci_assign_unassigned_resources(); -#endif /* !CONFIG_PPC_ISERIES */ + if (!firmware_has_feature(FW_FEATURE_ISERIES)) { + if (pci_probe_only) + pcibios_claim_of_setup(); + else + /* FIXME: `else' will be removed when + pci_assign_unassigned_resources() is able to work + correctly with [partially] allocated PCI tree. */ + pci_assign_unassigned_resources(); + } /* Call machine dependent final fixup */ if (ppc_md.pcibios_fixup) @@ -586,8 +587,9 @@ static int __init pcibios_init(void) printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); #ifdef CONFIG_PPC_MULTIPLATFORM - /* map in PCI I/O space */ - phbs_remap_io(); + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + /* map in PCI I/O space */ + phbs_remap_io(); #endif printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); @@ -637,13 +639,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) */ int pci_domain_nr(struct pci_bus *bus) { -#ifdef CONFIG_PPC_ISERIES - return 0; -#else - struct pci_controller *hose = pci_bus_to_host(bus); + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return 0; + else { + struct pci_controller *hose = pci_bus_to_host(bus); - return hose->global_number; -#endif + return hose->global_number; + } } EXPORT_SYMBOL(pci_domain_nr); @@ -651,12 +653,12 @@ EXPORT_SYMBOL(pci_domain_nr); /* Decide whether to display the domain number in /proc */ int pci_proc_domain(struct pci_bus *bus) { -#ifdef CONFIG_PPC_ISERIES - return 0; -#else - struct pci_controller *hose = pci_bus_to_host(bus); - return hose->buid; -#endif + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return 0; + else { + struct pci_controller *hose = pci_bus_to_host(bus); + return hose->buid; + } } /* diff --git a/arch/powerpc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c index bdc3977a7b062..e0dcf2b41fbe9 100644 --- a/arch/powerpc/kernel/perfmon_fsl_booke.c +++ b/arch/powerpc/kernel/perfmon_fsl_booke.c @@ -1,4 +1,4 @@ -/* kernel/perfmon_fsl_booke.c +/* arch/powerpc/kernel/perfmon_fsl_booke.c * Freescale Book-E Performance Monitor code * * Author: Andy Fleming diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a127a1e3c0976..7b2f6452ba725 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -424,7 +424,7 @@ void show_regs(struct pt_regs * regs) printk("NIP: "REG" LR: "REG" CTR: "REG"\n", regs->nip, regs->link, regs->ctr); printk("REGS: %p TRAP: %04lx %s (%s)\n", - regs, regs->trap, print_tainted(), system_utsname.release); + regs, regs->trap, print_tainted(), init_utsname()->release); printk("MSR: "REG" ", regs->msr); printbits(regs->msr, msr_bits); printk(" CR: %08lX XER: %08lX\n", regs->ccr, regs->xer); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index dea75d73f9831..975102a020d96 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -526,9 +526,7 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { -#ifdef CONFIG_PPC64 secure_computing(regs->gpr[0]); -#endif if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) @@ -548,12 +546,8 @@ void do_syscall_trace_enter(struct pt_regs *regs) void do_syscall_trace_leave(struct pt_regs *regs) { -#ifdef CONFIG_PPC32 - secure_computing(regs->gpr[0]); -#endif - if (unlikely(current->audit_context)) - audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) @@ -561,8 +555,3 @@ void do_syscall_trace_leave(struct pt_regs *regs) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); } - -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(do_syscall_trace_enter); -EXPORT_SYMBOL(do_syscall_trace_leave); -#endif diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 0af3fc1bdcc92..89cfaf49d3de8 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -442,31 +442,6 @@ void __init smp_setup_cpu_maps(void) } #endif /* CONFIG_SMP */ -int __initdata do_early_xmon; -#ifdef CONFIG_XMON -extern int xmon_no_auto_backtrace; - -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "nobt", 4) == 0) - xmon_no_auto_backtrace = 1; - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - do_early_xmon = 1; - - return 0; -} -early_param("xmon", early_xmon); -#endif - static __init int add_pcspkr(void) { struct device_node *np; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 79a17795d17bd..191d0ab092222 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -238,12 +238,11 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_maps(); -#ifdef CONFIG_XMON_DEFAULT - xmon_init(1); -#endif /* Register early console */ register_early_udbg_console(); + xmon_setup(); + #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) ppc_md.kgdb_map_scc(); @@ -280,9 +279,6 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; - if (do_early_xmon) - debugger(NULL); - /* set up the bootmem stuff with available memory */ do_init_bootmem(); if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 962ad5ebc7678..4b2e32eab9dc3 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -391,18 +391,14 @@ void __init setup_system(void) find_legacy_serial_ports(); /* - * Initialize xmon - */ -#ifdef CONFIG_XMON_DEFAULT - xmon_init(1); -#endif - /* * Register early console */ register_early_udbg_console(); - if (do_early_xmon) - debugger(NULL); + /* + * Initialize xmon + */ + xmon_setup(); check_smt_enabled(); smp_setup_cpu_maps(); @@ -414,7 +410,7 @@ void __init setup_system(void) smp_release_cpus(); #endif - printk("Starting Linux PPC64 %s\n", system_utsname.version); + printk("Starting Linux PPC64 %s\n", init_utsname()->version); printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 5e391fc253407..d15c33e959599 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -69,16 +69,20 @@ struct readdir_callback32 { }; static int fillonedir(void * __buf, const char * name, int namlen, - off_t offset, ino_t ino, unsigned int d_type) + off_t offset, u64 ino, unsigned int d_type) { struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf; struct old_linux_dirent32 __user * dirent; + ino_t d_ino; if (buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->count++; dirent = buf->dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(offset, &dirent->d_offset); put_user(namlen, &dirent->d_namlen); copy_to_user(dirent->d_name, name, namlen); @@ -120,15 +124,20 @@ asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp, int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { + compat_ino_t ino; long err; if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + err = access_ok(VERIFY_WRITE, statbuf, sizeof(*statbuf)) ? 0 : -EFAULT; err |= __put_user(new_encode_dev(stat->dev), &statbuf->st_dev); - err |= __put_user(stat->ino, &statbuf->st_ino); + err |= __put_user(ino, &statbuf->st_ino); err |= __put_user(stat->mode, &statbuf->st_mode); err |= __put_user(stat->nlink, &statbuf->st_nlink); err |= __put_user(stat->uid, &statbuf->st_uid); diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 9b69d99a91038..d358866b880f2 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -260,7 +260,7 @@ long ppc_newuname(struct new_utsname __user * name) int err = 0; down_read(&uts_sem); - if (copy_to_user(name, &system_utsname, sizeof(*name))) + if (copy_to_user(name, utsname(), sizeof(*name))) err = -EFAULT; up_read(&uts_sem); if (!err) @@ -273,7 +273,7 @@ int sys_uname(struct old_utsname __user *name) int err = 0; down_read(&uts_sem); - if (copy_to_user(name, &system_utsname, sizeof(*name))) + if (copy_to_user(name, utsname(), sizeof(*name))) err = -EFAULT; up_read(&uts_sem); if (!err) @@ -289,19 +289,19 @@ int sys_olduname(struct oldold_utsname __user *name) return -EFAULT; down_read(&uts_sem); - error = __copy_to_user(&name->sysname, &system_utsname.sysname, + error = __copy_to_user(&name->sysname, &utsname()->sysname, __OLD_UTS_LEN); error |= __put_user(0, name->sysname + __OLD_UTS_LEN); - error |= __copy_to_user(&name->nodename, &system_utsname.nodename, + error |= __copy_to_user(&name->nodename, &utsname()->nodename, __OLD_UTS_LEN); error |= __put_user(0, name->nodename + __OLD_UTS_LEN); - error |= __copy_to_user(&name->release, &system_utsname.release, + error |= __copy_to_user(&name->release, &utsname()->release, __OLD_UTS_LEN); error |= __put_user(0, name->release + __OLD_UTS_LEN); - error |= __copy_to_user(&name->version, &system_utsname.version, + error |= __copy_to_user(&name->version, &utsname()->version, __OLD_UTS_LEN); error |= __put_user(0, name->version + __OLD_UTS_LEN); - error |= __copy_to_user(&name->machine, &system_utsname.machine, + error |= __copy_to_user(&name->machine, &utsname()->machine, __OLD_UTS_LEN); error |= override_machine(name->machine); up_read(&uts_sem); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 406f308ddeadd..d45a168bdacaa 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -25,8 +25,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); /* SMT stuff */ #ifdef CONFIG_PPC_MULTIPLATFORM -/* default to snooze disabled */ -DEFINE_PER_CPU(unsigned long, smt_snooze_delay); +/* Time in microseconds we delay before sleeping in the idle loop */ +DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 }; static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, size_t count) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 8b278d85ca4ed..85b9244a098c7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -1041,6 +1041,48 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); } +#ifdef CONFIG_RTC_CLASS +static int set_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return -ENODEV; + + err = rtc_set_time(class_dev, tm); + + rtc_class_close(class_dev); + + return 0; +} + +static void get_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return; + + err = rtc_read_time(class_dev, tm); + + rtc_class_close(class_dev); + + return; +} + +int __init rtc_class_hookup(void) +{ + ppc_md.get_rtc_time = get_rtc_class_time; + ppc_md.set_rtc_time = set_rtc_class_time; + + return 0; +} +#endif /* CONFIG_RTC_CLASS */ + #define FEBRUARY 2 #define STARTOFTIME 1970 diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 02665a02130d1..cb0e8d46c3e8f 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -132,6 +132,14 @@ SECTIONS *(__ftr_fixup) __stop___ftr_fixup = .; } +#ifdef CONFIG_PPC64 + . = ALIGN(8); + __fw_ftr_fixup : { + __start___fw_ftr_fixup = .; + *(__fw_ftr_fixup) + __stop___fw_ftr_fixup = .; + } +#endif . = ALIGN(PAGE_SIZE); .init.ramfs : { diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 336dd191f768c..a0360ae10d0cc 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -14,9 +14,15 @@ endif obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o \ strcase.o +obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o obj-$(CONFIG_DEBUG_KERNEL) += sstep.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_CPM2) += rheap.o +endif diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 31e511856dc58..57bf991ccd6e1 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -423,17 +423,21 @@ void *rh_detach_region(rh_info_t * info, void *start, int size) return (void *)s; } -void *rh_alloc(rh_info_t * info, int size, const char *owner) +void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner) { struct list_head *l; rh_block_t *blk; rh_block_t *newblk; void *start; - /* Validate size */ - if (size <= 0) + /* Validate size, (must be power of two) */ + if (size <= 0 || (alignment & (alignment - 1)) != 0) return ERR_PTR(-EINVAL); + /* given alignment larger that default rheap alignment */ + if (alignment > info->alignment) + size += alignment - 1; + /* Align to configured alignment */ size = (size + (info->alignment - 1)) & ~(info->alignment - 1); @@ -476,15 +480,27 @@ void *rh_alloc(rh_info_t * info, int size, const char *owner) attach_taken_block(info, newblk); + /* for larger alignment return fixed up pointer */ + /* this is no problem with the deallocator since */ + /* we scan for pointers that lie in the blocks */ + if (alignment > info->alignment) + start = (void *)(((unsigned long)start + alignment - 1) & + ~(alignment - 1)); + return start; } +void *rh_alloc(rh_info_t * info, int size, const char *owner) +{ + return rh_alloc_align(info, size, info->alignment, owner); +} + /* allocate at precisely the given address */ void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner) { struct list_head *l; rh_block_t *blk, *newblk1, *newblk2; - unsigned long s, e, m, bs, be; + unsigned long s, e, m, bs = 0, be = 0; /* Validate size */ if (size <= 0) diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index 754143e8936bd..29bc9126241b1 100644 --- a/arch/powerpc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile @@ -11,3 +11,6 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ mcrfs.o mffs.o mtfsb0.o mtfsb1.o \ mtfsf.o mtfsfi.o stfiwx.o stfs.o \ udivmodti4.o + +CFLAGS_fabs.o = -fno-builtin-fabs +CFLAGS_math.o = -fno-builtin-fabs diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index b1da031654960..ac64f4aaa5091 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -63,32 +63,13 @@ #include <asm/iommu.h> #include <asm/abs_addr.h> #include <asm/vdso.h> +#include <asm/firmware.h> #include "mmu_decl.h" unsigned long ioremap_bot = IMALLOC_BASE; static unsigned long phbs_io_bot = PHBS_IO_BASE; -#ifdef CONFIG_PPC_ISERIES - -void __iomem *ioremap(unsigned long addr, unsigned long size) -{ - return (void __iomem *)addr; -} - -extern void __iomem *__ioremap(unsigned long addr, unsigned long size, - unsigned long flags) -{ - return (void __iomem *)addr; -} - -void iounmap(volatile void __iomem *addr) -{ - return; -} - -#else - /* * map_io_page currently only called by __ioremap * map_io_page adds an entry to the ioremap page table @@ -161,6 +142,9 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size, unsigned long pa, ea; void __iomem *ret; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return (void __iomem *)addr; + /* * Choose an address to map it to. * Once the imalloc system is running, we use it. @@ -255,6 +239,9 @@ void iounmap(volatile void __iomem *token) { void *addr; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return; + if (!mem_init_done) return; @@ -315,8 +302,6 @@ int iounmap_explicit(volatile void __iomem *start, unsigned long size) return 0; } -#endif - EXPORT_SYMBOL(ioremap); EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index dbc1abbde0381..b10e4707d7c13 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -21,6 +21,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> +#include <asm/firmware.h> /* void slb_allocate_realmode(unsigned long ea); * @@ -183,6 +184,7 @@ slb_finish_load: * dont have any LRU information to help us choose a slot. */ #ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION /* * On iSeries, the "bolted" stack segment can be cast out on * shared processor switch so we need to check for a miss on @@ -194,6 +196,7 @@ slb_finish_load: li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ cmpld r9,r3 beq 3f +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ ld r10,PACASTABRR(r13) diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c index 75f57bc96b404..b4278cfd1f80c 100644 --- a/arch/powerpc/oprofile/backtrace.c +++ b/arch/powerpc/oprofile/backtrace.c @@ -11,6 +11,7 @@ #include <linux/sched.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/compat.h> #define STACK_SP(STACK) *(STACK) @@ -26,8 +27,9 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) { unsigned int stack_frame[2]; + void __user *p = compat_ptr(sp); - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, p, sizeof(stack_frame))) return 0; /* @@ -35,8 +37,7 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) * which means that we've done all that we can do from * interrupt context. */ - if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp, - sizeof(stack_frame))) + if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame))) return 0; if (!is_first) @@ -54,10 +55,10 @@ static unsigned long user_getsp64(unsigned long sp, int is_first) { unsigned long stack_frame[3]; - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, (void __user *)sp, sizeof(stack_frame))) return 0; - if (__copy_from_user_inatomic(stack_frame, (void *)sp, + if (__copy_from_user_inatomic(stack_frame, (void __user *)sp, sizeof(stack_frame))) return 0; diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index e0491c3c71f18..d8ee3aea83f89 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -1,5 +1,5 @@ /* - * oprofile/op_model_7450.c + * arch/powerpc/oprofile/op_model_7450.c * * Freescale 745x/744x oprofile support, based on fsl_booke support * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 93d63e62662f6..e29dede31423e 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -1,5 +1,5 @@ /* - * oprofile/op_model_e500.c + * arch/powerpc/oprofile/op_model_fsl_booke.c * * Freescale Book-E oprofile support, based on ppc64 oprofile support * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig new file mode 100644 index 0000000000000..47d841ecf2e28 --- /dev/null +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -0,0 +1,21 @@ +menu "Platform support" + depends on PPC_82xx + +choice + prompt "Machine Type" + default MPC82xx_ADS + +config MPC82xx_ADS + bool "Freescale MPC82xx ADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8272 + select 8260 + select CPM2 + select FSL_SOC + help + This option enables support for the MPC8272 ADS board + +endchoice + +endmenu diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile new file mode 100644 index 0000000000000..d9fd4c84d2e05 --- /dev/null +++ b/arch/powerpc/platforms/82xx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the PowerPC 82xx linux kernel. +# +obj-$(CONFIG_PPC_82xx) += mpc82xx.o +obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h new file mode 100644 index 0000000000000..9cd8893b5a32e --- /dev/null +++ b/arch/powerpc/platforms/82xx/m82xx_pci.h @@ -0,0 +1,19 @@ +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/m8260_pci.h> + +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c new file mode 100644 index 0000000000000..89d702de48639 --- /dev/null +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -0,0 +1,111 @@ +/* + * MPC82xx setup and early boot code plus other random bits. + * + * Author: Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> +#include <linux/fs_uart_pd.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc8260.h> +#include <asm/irq.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/cpm2.h> +#include <asm/udbg.h> +#include <asm/i8259.h> +#include <linux/fs_enet_pd.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/cpm2_pic.h> + +#include "pq2ads_pd.h" + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); + + if (cpu) { + fp = (unsigned int *)get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp++; + } + + of_node_put(cpu); + } + + return found; +} + +void __init m82xx_calibrate_decr(void) +{ + ppc_tb_freq = 125000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 4; + ppc_proc_freq = 1000000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); +} + +void mpc82xx_ads_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c new file mode 100644 index 0000000000000..4276f087f26ef --- /dev/null +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -0,0 +1,661 @@ +/* + * MPC82xx_ads setup and early boot code plus other random bits. + * + * Author: Vitaly Bordug <vbordug@ru.mvista.com> + * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com> + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> +#include <linux/fs_uart_pd.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc8260.h> +#include <asm/irq.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/cpm2.h> +#include <asm/udbg.h> +#include <asm/i8259.h> +#include <linux/fs_enet_pd.h> + +#include <sysdev/fsl_soc.h> +#include <../sysdev/cpm2_pic.h> + +#include "pq2ads_pd.h" + +#ifdef CONFIG_PCI +static uint pci_clk_frq; +static struct { + unsigned long *pci_int_stat_reg; + unsigned long *pci_int_mask_reg; +} pci_regs; + +static unsigned long pci_int_base; +static struct irq_host *pci_pic_host; +static struct device_node *pci_pic_node; +#endif + +static void __init mpc82xx_ads_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2"); + struct resource r; + cpm2_map_t *cpm_reg; + + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "PIC init: invalid resource\n"); + of_node_put(np); + return; + } + cpm2_pic_init(np); + of_node_put(np); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t)); + cpm_reg->im_intctl.ic_siprr = 0x05309770; + iounmap(cpm_reg); +#ifdef CONFIG_PCI + /* Initialize stuff for the 82xx CPLD IC and install demux */ + m82xx_pci_init_irq(); +#endif +} + +static void init_fcc1_ioports(struct fs_platform_info *fpi) +{ + struct io_port *io; + u32 tempval; + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + bcsr = ioremap(r.start + 4, sizeof(u32)); + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR1_FETHIEN); + setbits32(bcsr, BCSR1_FETH_RST); + + /* FCC1 pins are on port A/C. */ + /* Configure port A and C pins for FCC1 Ethernet. */ + + tempval = in_be32(&io->iop_pdira); + tempval &= ~PA1_DIRA0; + tempval |= PA1_DIRA1; + out_be32(&io->iop_pdira, tempval); + + tempval = in_be32(&io->iop_psora); + tempval &= ~PA1_PSORA0; + tempval |= PA1_PSORA1; + out_be32(&io->iop_psora, tempval); + + setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1); + + /* Alter clocks */ + tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); + + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX); + + iounmap(bcsr); + iounmap(immap); +} + +static void init_fcc2_ioports(struct fs_platform_info *fpi) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + struct io_port *io; + u32 tempval; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + io = &immap->im_ioport; + bcsr = ioremap(r.start + 12, sizeof(u32)); + + /* Enable the PHY */ + clrbits32(bcsr, BCSR3_FETHIEN2); + setbits32(bcsr, BCSR3_FETH2_RST); + + /* FCC2 are port B/C. */ + /* Configure port A and C pins for FCC2 Ethernet. */ + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1); + + tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); + + /* Alter clocks */ + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX); + + iounmap(bcsr); + iounmap(immap); +} + +void init_fcc_ioports(struct fs_platform_info *fpi) +{ + int fcc_no = fs_get_fcc_index(fpi->fs_no); + + switch (fcc_no) { + case 0: + init_fcc1_ioports(fpi); + break; + case 1: + init_fcc2_ioports(fpi); + break; + default: + printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); + return; + } +} + +static void init_scc1_uart_ioports(struct fs_uart_platform_info *data) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + + /* SCC1 is only on port D */ + setbits32(&immap->im_ioport.iop_ppard, 0x00000003); + clrbits32(&immap->im_ioport.iop_psord, 0x00000001); + setbits32(&immap->im_ioport.iop_psord, 0x00000002); + clrbits32(&immap->im_ioport.iop_pdird, 0x00000001); + setbits32(&immap->im_ioport.iop_pdird, 0x00000002); + + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_tx - 1) << (4 - data->clk_tx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_rx - 1) << (4 - data->clk_rx))); + + iounmap(immap); +} + +static void init_scc4_uart_ioports(struct fs_uart_platform_info *data) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + + setbits32(&immap->im_ioport.iop_ppard, 0x00000600); + clrbits32(&immap->im_ioport.iop_psord, 0x00000600); + clrbits32(&immap->im_ioport.iop_pdird, 0x00000200); + setbits32(&immap->im_ioport.iop_pdird, 0x00000400); + + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_tx - 1) << (4 - data->clk_tx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_rx - 1) << (4 - data->clk_rx))); + + iounmap(immap); +} + +void init_scc_ioports(struct fs_uart_platform_info *data) +{ + int scc_no = fs_get_scc_index(data->fs_no); + + switch (scc_no) { + case 0: + init_scc1_uart_ioports(data); + data->brg = data->clk_rx; + break; + case 3: + init_scc4_uart_ioports(data); + data->brg = data->clk_rx; + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + +void __init m82xx_board_setup(void) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + bcsr = ioremap(r.start + 4, sizeof(u32)); + /* Enable the 2nd UART port */ + clrbits32(bcsr, BCSR1_RS232_EN2); + +#ifdef CONFIG_SERIAL_CPM_SCC1 + clrbits32((u32 *) & immap->im_scc[0].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + clrbits32((u32 *) & immap->im_scc[1].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + clrbits32((u32 *) & immap->im_scc[2].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + clrbits32((u32 *) & immap->im_scc[3].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + + iounmap(bcsr); + iounmap(immap); +} + +#ifdef CONFIG_PCI +static void m82xx_pci_mask_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); + return; +} + +static void m82xx_pci_unmask_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); + return; +} + +static void m82xx_pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); + return; +} + +static void m82xx_pci_end_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type m82xx_pci_ic = { + .typename = "MPC82xx ADS PCI", + .name = "MPC82xx ADS PCI", + .enable = m82xx_pci_unmask_irq, + .disable = m82xx_pci_mask_irq, + .ack = m82xx_pci_mask_and_ack, + .end = m82xx_pci_end_irq, + .mask = m82xx_pci_mask_irq, + .mask_ack = m82xx_pci_mask_and_ack, + .unmask = m82xx_pci_unmask_irq, + .eoi = m82xx_pci_end_irq, +}; + +static void +m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for (;;) { + stat = *pci_regs.pci_int_stat_reg; + mask = *pci_regs.pci_int_mask_reg; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(pci_int_base + bit, regs); + } + } +} + +static int pci_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return node == pci_pic_node; +} + +static int pci_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip(virq, &m82xx_pci_ic); + return 0; +} + +static void pci_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* remove chip and handler */ + set_irq_chip(virq, NULL); +} + +static struct irq_host_ops pci_pic_host_ops = { + .match = pci_pic_host_match, + .map = pci_pic_host_map, + .unmap = pci_host_unmap, +}; + +void m82xx_pci_init_irq(void) +{ + int irq; + cpm2_map_t *immap; + struct device_node *np; + struct resource r; + const u32 *regs; + unsigned int size; + const u32 *irq_map; + int i; + unsigned int irq_max, irq_min; + + if ((np = of_find_node_by_type(NULL, "soc")) == NULL) { + printk(KERN_INFO "No SOC node in device tree\n"); + return; + } + memset(&r, 0, sizeof(r)); + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_INFO "No SOC reg property in device tree\n"); + return; + } + immap = ioremap(r.start, sizeof(*immap)); + of_node_put(np); + + /* install the demultiplexer for the PCI cascade interrupt */ + np = of_find_node_by_type(NULL, "pci"); + if (!np) { + printk(KERN_INFO "No pci node on device tree\n"); + iounmap(immap); + return; + } + irq_map = get_property(np, "interrupt-map", &size); + if ((!irq_map) || (size <= 7)) { + printk(KERN_INFO "No interrupt-map property of pci node\n"); + iounmap(immap); + return; + } + size /= sizeof(irq_map[0]); + for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) { + if (irq_map[5] < irq_min) + irq_min = irq_map[5]; + if (irq_map[5] > irq_max) + irq_max = irq_map[5]; + } + pci_int_base = irq_min; + irq = irq_of_parse_and_map(np, 0); + set_irq_chained_handler(irq, m82xx_pci_irq_demux); + of_node_put(np); + np = of_find_node_by_type(NULL, "pci-pic"); + if (!np) { + printk(KERN_INFO "No pci pic node on device tree\n"); + iounmap(immap); + return; + } + pci_pic_node = of_node_get(np); + /* PCI interrupt controller registers: status and mask */ + regs = get_property(np, "reg", &size); + if ((!regs) || (size <= 2)) { + printk(KERN_INFO "No reg property in pci pic node\n"); + iounmap(immap); + return; + } + pci_regs.pci_int_stat_reg = + ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg)); + pci_regs.pci_int_mask_reg = + ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg)); + of_node_put(np); + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = regs[0] | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *pci_regs.pci_int_mask_reg |= 0xfff00000; + iounmap(immap); + pci_pic_host = + irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1, + &pci_pic_host_ops, irq_max + 1); + return; +} + +static int m82xx_pci_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +static void +__init mpc82xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) { + pci_read_irq_line(dev); + } +} + +void __init add_bridge(struct device_node *np) +{ + int len; + struct pci_controller *hose; + struct resource r; + const int *bus_range; + const void *ptr; + + memset(&r, 0, sizeof(r)); + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_INFO "No PCI reg property in device tree\n"); + return; + } + if (!(ptr = get_property(np, "clock-frequency", NULL))) { + printk(KERN_INFO "No clock-frequency property in PCI node"); + return; + } + pci_clk_frq = *(uint *) ptr; + of_node_put(np); + bus_range = get_property(np, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", np->full_name); + } + + pci_assign_all_buses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->arch_data = np; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->bus_offset = 0; + + hose->set_cfg_type = 1; + + setup_indirect_pci(hose, + r.start + offsetof(pci_cpm2_t, pci_cfg_addr), + r.start + offsetof(pci_cpm2_t, pci_cfg_data)); + + pci_process_bridge_OF_ranges(hose, np, 1); +} +#endif + +/* + * Setup the architecture + */ +static void __init mpc82xx_ads_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc82xx_ads_setup_arch()", 0); + cpm2_reset(); + + /* Map I/O region to a 256MB BAT */ + + m82xx_board_setup(); + +#ifdef CONFIG_PCI + ppc_md.pci_exclude_device = m82xx_pci_exclude_device; + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + of_node_put(np); + ppc_md.pci_map_irq = NULL; + ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup; + ppc_md.pcibios_fixup_bus = NULL; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc82xx_ads_probe(void) +{ + /* We always match for now, eventually we should look at + * the flat dev tree to ensure this is the board we are + * supposed to run on + */ + return 1; +} + +#define RMR_CSRE 0x00000001 +static void m82xx_restart(char *cmd) +{ + __volatile__ unsigned char dummy; + + local_irq_disable(); + ((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE; + + /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */ + mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR)); + dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0]; + printk("Restart failed\n"); + while (1) ; +} + +static void m82xx_halt(void) +{ + local_irq_disable(); + while (1) ; +} + +define_machine(mpc82xx_ads) +{ + .name = "MPC82xx ADS", + .probe = mpc82xx_ads_probe, + .setup_arch = mpc82xx_ads_setup_arch, + .init_IRQ = mpc82xx_ads_pic_init, + .show_cpuinfo = mpc82xx_ads_show_cpuinfo, + .get_irq = cpm2_get_irq, + .calibrate_decr = m82xx_calibrate_decr, + .restart = m82xx_restart,.halt = m82xx_halt, +}; diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h new file mode 100644 index 0000000000000..a7348213508f0 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -0,0 +1,67 @@ +/* + * PQ2/mpc8260 board-specific stuff + * + * A collection of structures, addresses, and values associated with + * the Freescale MPC8260ADS/MPC8266ADS-PCI boards. + * Copied from the RPX-Classic and SBS8260 stuff. + * + * Author: Vitaly Bordug <vbordug@ru.mvista.com> + * + * Originally written by Dan Malek for Motorola MPC8260 family + * + * Copyright (c) 2001 Dan Malek <dan@embeddedalley.com> + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __MACH_ADS8260_DEFS +#define __MACH_ADS8260_DEFS + +#include <linux/config.h> + +#include <asm/ppcboot.h> + +/* For our show_cpuinfo hooks. */ +#define CPUINFO_VENDOR "Freescale Semiconductor" +#define CPUINFO_MACHINE "PQ2 ADS PowerPC" + +/* Backword-compatibility stuff for the drivers */ +#define CPM_MAP_ADDR ((uint)0xf0000000) +#define CPM_IRQ_OFFSET 0 + +/* The ADS8260 has 16, 32-bit wide control/status registers, accessed + * only on word boundaries. + * Not all are used (yet), or are interesting to us (yet). + */ + +/* Things of interest in the CSR. + */ +#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ +#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ +#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/ +#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ +#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */ +#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */ +#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ +#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */ + +/* cpm serial driver works with constants below */ + +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) + +void m82xx_pci_init_irq(void); +void mpc82xx_ads_show_cpuinfo(struct seq_file*); +void m82xx_calibrate_decr(void); + +#endif /* __MACH_ADS8260_DEFS */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 5fe7b7faf45f1..0975e94ac7c46 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,13 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC832x_MDS + bool "Freescale MPC832x MDS" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This option enables support for the MPC832x MDS evaluation board. + config MPC834x_SYS bool "Freescale MPC834x SYS" select DEFAULT_UIMAGE @@ -27,6 +34,12 @@ config MPC834x_ITX endchoice +config PPC_MPC832x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC832x_MDS + config MPC834x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c new file mode 100644 index 0000000000000..54dea9d42dc96 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Description: + * MPC832xE MDS board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" +#include "mpc832x_mds.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +static u8 *bcsr_regs = NULL; + +u8 *get_bcsr(void) +{ + return bcsr_regs; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc832x_sys_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc832x_sys_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + if ((np = of_find_node_by_name(np, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } + + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) + != NULL){ + /* Reset the Ethernet PHY */ + bcsr_regs[9] &= ~0x20; + udelay(1000); + bcsr_regs[9] |= 0x20; + iounmap(bcsr_regs); + of_node_put(np); + } + +#endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +void __init mpc832x_sys_init_IRQ(void) +{ + + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc832x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc832x_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc832x_sys_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "MPC8323EMDS")) + return 0; + + DBG("%s found\n", model); + + return 1; +} + +define_machine(mpc832x_mds) { + .name = "MPC832x MDS", + .probe = mpc832x_sys_probe, + .setup_arch = mpc832x_sys_setup_arch, + .init_IRQ = mpc832x_sys_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.h b/arch/powerpc/platforms/83xx/mpc832x_mds.h new file mode 100644 index 0000000000000..a49588904f8a4 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Description: + * MPC832x MDS board specific header. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC832x_MDS_H__ +#define __MACH_MPC832x_MDS_H__ + +extern u8 *get_bcsr(void); + +#endif /* __MACH_MPC832x_MDS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 969fbb6d8c467..8c676d763bb0a 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -109,6 +109,10 @@ static int __init mpc834x_itx_probe(void) return 1; } +#ifdef CONFIG_RTC_CLASS +late_initcall(rtc_class_hookup); +#endif + define_machine(mpc834x_itx) { .name = "MPC834x ITX", .probe = mpc834x_itx_probe, diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h index fedecb73f7ffc..7d5bbef084e71 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.h @@ -1,5 +1,5 @@ /* - * arch/powerppc/platforms/83xx/mpc834x_sys.h + * arch/powerpc/platforms/83xx/mpc834x_sys.h * * MPC834X SYS common board definitions * diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c new file mode 100644 index 0000000000000..c0191900fc251 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -0,0 +1,219 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Li Yang <LeoLi@freescale.com> + * Yin Olivia <Hong-hua.Yin@freescale.com> + * + * Description: + * MPC8360E MDS PB board specific routines. + * + * Changelog: + * Jun 21, 2006 Initial version + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +static u8 *bcsr_regs = NULL; + +u8 *get_bcsr(void) +{ + return bcsr_regs; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8360_sys_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8360_sys_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + if ((np = of_find_node_by_name(np, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } + + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) + != NULL){ + /* Reset the Ethernet PHY */ + bcsr_regs[9] &= ~0x20; + udelay(1000); + bcsr_regs[9] |= 0x20; + iounmap(bcsr_regs); + of_node_put(np); + } + +#endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +void __init mpc8360_sys_init_IRQ(void) +{ + + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc8360_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc8360_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8360_sys_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8360EPB")) + return 0; + + DBG("MPC8360EMDS-PB found\n"); + + return 1; +} + +define_machine(mpc8360_sys) { + .name = "MPC8360E PB", + .probe = mpc8360_sys_probe, + .setup_arch = mpc8360_sys_setup_arch, + .init_IRQ = mpc8360_sys_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c3268d9877e47..0584f3c7e8844 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,6 +11,12 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS board +config MPC8560_ADS + bool "Freescale MPC8560 ADS" + select DEFAULT_UIMAGE + help + This option enables support for the MPC 8560 ADS board + config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE @@ -25,6 +31,11 @@ config MPC8540 select PPC_INDIRECT_PCI default y if MPC8540_ADS || MPC85xx_CDS +config MPC8560 + bool + select PPC_INDIRECT_PCI + default y if MPC8560_ADS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx @@ -34,4 +45,14 @@ config MPIC bool default y +config CPM2 + bool + depends on MPC8560 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it. + endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 7615aa59c78ba..282f5d0d01520 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o +obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h index c0d56d2bb5a56..da82f4c0fdac6 100644 --- a/arch/powerpc/platforms/85xx/mpc8540_ads.h +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -1,5 +1,5 @@ /* - * arch/ppc/platforms/85xx/mpc8540_ads.h + * arch/powerpc/platforms/85xx/mpc8540_ads.h * * MPC8540ADS board definitions * diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index b44db6268f3d0..83415db33378e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -1,5 +1,5 @@ /* - * arch/ppc/platforms/85xx/mpc85xx.h + * arch/powerpc/platforms/85xx/mpc85xx.h * * MPC85xx soc definitions/function decls * diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index cae6b73357d5b..28070e7ae5074 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -32,6 +32,13 @@ #include <sysdev/fsl_soc.h> #include "mpc85xx.h" +#ifdef CONFIG_CPM2 +#include <linux/fs_enet_pd.h> +#include <asm/cpm2.h> +#include <sysdev/cpm2_pic.h> +#include <asm/fs_pd.h> +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -57,12 +64,29 @@ mpc85xx_pcibios_fixup(void) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_CPM2 + +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq(regs)) >= 0) { + generic_handle_irq(cascade_irq, regs); + } + desc->chip->eoi(irq); +} + +#endif /* CONFIG_CPM2 */ void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; struct device_node *np = NULL; +#ifdef CONFIG_CPM2 + int irq; +#endif np = of_find_node_by_type(np, "open-pic"); @@ -104,11 +128,103 @@ void __init mpc85xx_ads_pic_init(void) mpic_assign_isu(mpic, 14, r.start + 0x10100); mpic_init(mpic); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + np = of_find_node_by_type(NULL, "cpm-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + + cpm2_pic_init(np); + set_irq_chained_handler(irq, cpm2_cascade); +#endif } /* * Setup the architecture */ +#ifdef CONFIG_CPM2 +void init_fcc_ioports(struct fs_platform_info *fpi) +{ + struct io_port *io = cpm2_map(im_ioport); + int fcc_no = fs_get_fcc_index(fpi->fs_no); + int target; + u32 tempval; + + switch(fcc_no) { + case 1: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + target = CPM_CLK_FCC2; + break; + case 2: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + target = CPM_CLK_FCC3; + break; + default: + printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); + return; + } + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_pparc, tempval); + + cpm2_unmap(io); + + /* Configure Serial Interface clock routing. + * First, clear FCC bits to zero, + * then set the ones we want. + */ + cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX); +} +#endif + static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; @@ -131,6 +247,10 @@ static void __init mpc85xx_ads_setup_arch(void) of_node_put(cpu); } +#ifdef CONFIG_CPM2 + cpm2_reset(); +#endif + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.h b/arch/powerpc/platforms/85xx/mpc85xx_ads.h new file mode 100644 index 0000000000000..effcbf78f8517 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.h @@ -0,0 +1,61 @@ +/* + * MPC85xx ADS board definitions + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC85XXADS_H +#define __MACH_MPC85XXADS_H + +#include <linux/config.h> +#include <linux/initrd.h> +#include <sysdev/fsl_soc.h> + +#define BCSR_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +#ifdef CONFIG_CPM2 + +#define MPC85xx_CPM_OFFSET (0x80000) + +#define CPM_MAP_ADDR (get_immrbase() + MPC85xx_CPM_OFFSET) +#define CPM_IRQ_OFFSET 60 + +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) + +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + +#endif /* CONFIG_CPM2 */ +#endif /* __MACH_MPC85XXADS_H */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.h b/arch/powerpc/platforms/85xx/mpc85xx_cds.h index 671f54ff185ac..b251c9feb3dc2 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.h +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.h @@ -1,5 +1,5 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_cds_common.h + * arch/powerpc/platforms/85xx/mpc85xx_cds.h * * MPC85xx CDS board definitions * diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 6b57a47c5d37f..6cc59e0b45822 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -21,6 +21,12 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - Fix various assumptions related to HW CPU numbers vs. linux CPU numbers + * vs node numbers in the setup code + * - Implement proper handling of maxcpus=1/2 (that is, routing of irqs from + * a non-active node to the active node) */ #include <linux/interrupt.h> @@ -44,24 +50,25 @@ struct iic { u8 target_id; u8 eoi_stack[16]; int eoi_ptr; - struct irq_host *host; + struct device_node *node; }; static DEFINE_PER_CPU(struct iic, iic); #define IIC_NODE_COUNT 2 -static struct irq_host *iic_hosts[IIC_NODE_COUNT]; +static struct irq_host *iic_host; /* Convert between "pending" bits and hw irq number */ static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits) { unsigned char unit = bits.source & 0xf; + unsigned char node = bits.source >> 4; + unsigned char class = bits.class & 3; + /* Decode IPIs */ if (bits.flags & CBE_IIC_IRQ_IPI) - return IIC_IRQ_IPI0 | (bits.prio >> 4); - else if (bits.class <= 3) - return (bits.class << 4) | unit; + return IIC_IRQ_TYPE_IPI | (bits.prio >> 4); else - return IIC_IRQ_INVALID; + return (node << IIC_IRQ_NODE_SHIFT) | (class << 4) | unit; } static void iic_mask(unsigned int irq) @@ -86,21 +93,70 @@ static struct irq_chip iic_chip = { .eoi = iic_eoi, }; + +static void iic_ioexc_eoi(unsigned int irq) +{ +} + +static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct cbe_iic_regs *node_iic = desc->handler_data; + unsigned int base = (irq & 0xffffff00) | IIC_IRQ_TYPE_IOEXC; + unsigned long bits, ack; + int cascade; + + for (;;) { + bits = in_be64(&node_iic->iic_is); + if (bits == 0) + break; + /* pre-ack edge interrupts */ + ack = bits & IIC_ISR_EDGE_MASK; + if (ack) + out_be64(&node_iic->iic_is, ack); + /* handle them */ + for (cascade = 63; cascade >= 0; cascade--) + if (bits & (0x8000000000000000UL >> cascade)) { + unsigned int cirq = + irq_linear_revmap(iic_host, + base | cascade); + if (cirq != NO_IRQ) + generic_handle_irq(cirq, regs); + } + /* post-ack level interrupts */ + ack = bits & ~IIC_ISR_EDGE_MASK; + if (ack) + out_be64(&node_iic->iic_is, ack); + } + desc->chip->eoi(irq); +} + + +static struct irq_chip iic_ioexc_chip = { + .typename = " CELL-IOEX", + .mask = iic_mask, + .unmask = iic_unmask, + .eoi = iic_ioexc_eoi, +}; + /* Get an IRQ number from the pending state register of the IIC */ static unsigned int iic_get_irq(struct pt_regs *regs) { struct cbe_iic_pending_bits pending; struct iic *iic; + unsigned int virq; iic = &__get_cpu_var(iic); *(unsigned long *) &pending = in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + if (!(pending.flags & CBE_IIC_IRQ_VALID)) + return NO_IRQ; + virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending)); + if (virq == NO_IRQ) + return NO_IRQ; iic->eoi_stack[++iic->eoi_ptr] = pending.prio; BUG_ON(iic->eoi_ptr > 15); - if (pending.flags & CBE_IIC_IRQ_VALID) - return irq_linear_revmap(iic->host, - iic_pending_to_hwnum(pending)); - return NO_IRQ; + return virq; } #ifdef CONFIG_SMP @@ -108,12 +164,7 @@ static unsigned int iic_get_irq(struct pt_regs *regs) /* Use the highest interrupt priorities for IPI */ static inline int iic_ipi_to_irq(int ipi) { - return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi; -} - -static inline int iic_irq_to_ipi(int irq) -{ - return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0); + return IIC_IRQ_TYPE_IPI + 0xf - ipi; } void iic_setup_cpu(void) @@ -123,7 +174,7 @@ void iic_setup_cpu(void) void iic_cause_IPI(int cpu, int mesg) { - out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4); + out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4); } u8 iic_get_target_id(int cpu) @@ -134,9 +185,7 @@ EXPORT_SYMBOL_GPL(iic_get_target_id); struct irq_host *iic_get_irq_host(int node) { - if (node < 0 || node >= IIC_NODE_COUNT) - return NULL; - return iic_hosts[node]; + return iic_host; } EXPORT_SYMBOL_GPL(iic_get_irq_host); @@ -149,34 +198,20 @@ static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } - static void iic_request_ipi(int ipi, const char *name) { - int node, virq; + int virq; - for (node = 0; node < IIC_NODE_COUNT; node++) { - char *rname; - if (iic_hosts[node] == NULL) - continue; - virq = irq_create_mapping(iic_hosts[node], - iic_ipi_to_irq(ipi)); - if (virq == NO_IRQ) { - printk(KERN_ERR - "iic: failed to map IPI %s on node %d\n", - name, node); - continue; - } - rname = kzalloc(strlen(name) + 16, GFP_KERNEL); - if (rname) - sprintf(rname, "%s node %d", name, node); - else - rname = (char *)name; - if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, - rname, (void *)(long)ipi)) - printk(KERN_ERR - "iic: failed to request IPI %s on node %d\n", - name, node); + virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi)); + if (virq == NO_IRQ) { + printk(KERN_ERR + "iic: failed to map IPI %s\n", name); + return; } + if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name, + (void *)(long)ipi)) + printk(KERN_ERR + "iic: failed to request IPI %s\n", name); } void iic_request_IPIs(void) @@ -193,16 +228,24 @@ void iic_request_IPIs(void) static int iic_host_match(struct irq_host *h, struct device_node *node) { - return h->host_data != NULL && node == h->host_data; + return device_is_compatible(node, + "IBM,CBEA-Internal-Interrupt-Controller"); } static int iic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - if (hw < IIC_IRQ_IPI0) - set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); - else + switch (hw & IIC_IRQ_TYPE_MASK) { + case IIC_IRQ_TYPE_IPI: set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq); + break; + case IIC_IRQ_TYPE_IOEXC: + set_irq_chip_and_handler(virq, &iic_ioexc_chip, + handle_fasteoi_irq); + break; + default: + set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); + } return 0; } @@ -211,11 +254,39 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { - /* Currently, we don't translate anything. That needs to be fixed as - * we get better defined device-trees. iic interrupts have to be - * explicitely mapped by whoever needs them - */ - return -ENODEV; + unsigned int node, ext, unit, class; + const u32 *val; + + if (!device_is_compatible(ct, + "IBM,CBEA-Internal-Interrupt-Controller")) + return -ENODEV; + if (intsize != 1) + return -ENODEV; + val = get_property(ct, "#interrupt-cells", NULL); + if (val == NULL || *val != 1) + return -ENODEV; + + node = intspec[0] >> 24; + ext = (intspec[0] >> 16) & 0xff; + class = (intspec[0] >> 8) & 0xff; + unit = intspec[0] & 0xff; + + /* Check if node is in supported range */ + if (node > 1) + return -EINVAL; + + /* Build up interrupt number, special case for IO exceptions */ + *out_hwirq = (node << IIC_IRQ_NODE_SHIFT); + if (unit == IIC_UNIT_IIC && class == 1) + *out_hwirq |= IIC_IRQ_TYPE_IOEXC | ext; + else + *out_hwirq |= IIC_IRQ_TYPE_NORMAL | + (class << IIC_IRQ_CLASS_SHIFT) | unit; + + /* Dummy flags, ignored by iic code */ + *out_flags = IRQ_TYPE_EDGE_RISING; + + return 0; } static struct irq_host_ops iic_host_ops = { @@ -225,7 +296,7 @@ static struct irq_host_ops iic_host_ops = { }; static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, - struct irq_host *host) + struct device_node *node) { /* XXX FIXME: should locate the linux CPU number from the HW cpu * number properly. We are lucky for now @@ -237,19 +308,19 @@ static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe); iic->eoi_stack[0] = 0xff; - iic->host = host; + iic->node = of_node_get(node); out_be64(&iic->regs->prio, 0); - printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n", - hw_cpu, addr, iic->regs, iic->target_id); + printk(KERN_INFO "IIC for CPU %d target id 0x%x : %s\n", + hw_cpu, iic->target_id, node->full_name); } static int __init setup_iic(void) { struct device_node *dn; struct resource r0, r1; - struct irq_host *host; - int found = 0; + unsigned int node, cascade, found = 0; + struct cbe_iic_regs *node_iic; const u32 *np; for (dn = NULL; @@ -269,19 +340,33 @@ static int __init setup_iic(void) of_node_put(dn); return -ENODEV; } - host = NULL; - if (found < IIC_NODE_COUNT) { - host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, - IIC_SOURCE_COUNT, - &iic_host_ops, - IIC_IRQ_INVALID); - iic_hosts[found] = host; - BUG_ON(iic_hosts[found] == NULL); - iic_hosts[found]->host_data = of_node_get(dn); - found++; - } - init_one_iic(np[0], r0.start, host); - init_one_iic(np[1], r1.start, host); + found++; + init_one_iic(np[0], r0.start, dn); + init_one_iic(np[1], r1.start, dn); + + /* Setup cascade for IO exceptions. XXX cleanup tricks to get + * node vs CPU etc... + * Note that we configure the IIC_IRR here with a hard coded + * priority of 1. We might want to improve that later. + */ + node = np[0] >> 1; + node_iic = cbe_get_cpu_iic_regs(np[0]); + cascade = node << IIC_IRQ_NODE_SHIFT; + cascade |= 1 << IIC_IRQ_CLASS_SHIFT; + cascade |= IIC_UNIT_IIC; + cascade = irq_create_mapping(iic_host, cascade); + if (cascade == NO_IRQ) + continue; + set_irq_data(cascade, node_iic); + set_irq_chained_handler(cascade , iic_ioexc_cascade); + out_be64(&node_iic->iic_ir, + (1 << 12) /* priority */ | + (node << 4) /* dest node */ | + IIC_UNIT_THREAD_0 /* route them to thread 0 */); + /* Flush pending (make sure it triggers if there is + * anything pending + */ + out_be64(&node_iic->iic_is, 0xfffffffffffffffful); } if (found) @@ -292,6 +377,12 @@ static int __init setup_iic(void) void __init iic_init_IRQ(void) { + /* Setup an irq host data structure */ + iic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, IIC_SOURCE_COUNT, + &iic_host_ops, IIC_IRQ_INVALID); + BUG_ON(iic_host == NULL); + irq_set_default_host(iic_host); + /* Discover and initialize iics */ if (setup_iic() < 0) panic("IIC: Failed to initialize !\n"); diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 5560a92ec3abf..9ba1d3c17b4b4 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -2,48 +2,76 @@ #define ASM_CELL_PIC_H #ifdef __KERNEL__ /* - * Mapping of IIC pending bits into per-node - * interrupt numbers. + * Mapping of IIC pending bits into per-node interrupt numbers. * - * IRQ FF CC SS PP FF CC SS PP Description + * Interrupt numbers are in the range 0...0x1ff where the top bit + * (0x100) represent the source node. Only 2 nodes are supported with + * the current code though it's trivial to extend that if necessary using + * higher level bits * - * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge - * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge - * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 - * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 - * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 - * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * The bottom 8 bits are split into 2 type bits and 6 data bits that + * depend on the type: * - * F flags - * C class - * S source - * P Priority - * + node number - * * don't care + * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source + * 01 (0x40 | data) : IO exception. data is the exception number as + * defined by bit numbers in IIC_SR + * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority) + * and node is always 0 (IPIs are per-cpu, their source is + * not relevant) + * 11 (0xc0 | data) : reserved * - * A node consists of a Cell Broadband Engine and an optional - * south bridge device providing a maximum of 64 IRQs. - * The south bridge may be connected to either IOIF0 - * or IOIF1. - * Each SPE is represented as three IRQ lines, one per - * interrupt class. - * 16 IRQ numbers are reserved for inter processor - * interruptions, although these are only used in the - * range of the first node. + * In addition, interrupt number 0x80000000 is defined as always invalid + * (that is the node field is expected to never extend to move than 23 bits) * - * This scheme needs 128 IRQ numbers per BIF node ID, - * which means that with the total of 512 lines - * available, we can have a maximum of four nodes. */ enum { - IIC_IRQ_INVALID = 0xff, - IIC_IRQ_MAX = 0x3f, - IIC_IRQ_EXT_IOIF0 = 0x20, - IIC_IRQ_EXT_IOIF1 = 0x2b, - IIC_IRQ_IPI0 = 0x40, - IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ - IIC_SOURCE_COUNT = 0x50, + IIC_IRQ_INVALID = 0x80000000u, + IIC_IRQ_NODE_MASK = 0x100, + IIC_IRQ_NODE_SHIFT = 8, + IIC_IRQ_MAX = 0x1ff, + IIC_IRQ_TYPE_MASK = 0xc0, + IIC_IRQ_TYPE_NORMAL = 0x00, + IIC_IRQ_TYPE_IOEXC = 0x40, + IIC_IRQ_TYPE_IPI = 0x80, + IIC_IRQ_CLASS_SHIFT = 4, + IIC_IRQ_CLASS_0 = 0x00, + IIC_IRQ_CLASS_1 = 0x10, + IIC_IRQ_CLASS_2 = 0x20, + IIC_SOURCE_COUNT = 0x200, + + /* Here are defined the various source/dest units. Avoid using those + * definitions if you can, they are mostly here for reference + */ + IIC_UNIT_SPU_0 = 0x4, + IIC_UNIT_SPU_1 = 0x7, + IIC_UNIT_SPU_2 = 0x3, + IIC_UNIT_SPU_3 = 0x8, + IIC_UNIT_SPU_4 = 0x2, + IIC_UNIT_SPU_5 = 0x9, + IIC_UNIT_SPU_6 = 0x1, + IIC_UNIT_SPU_7 = 0xa, + IIC_UNIT_IOC_0 = 0x0, + IIC_UNIT_IOC_1 = 0xb, + IIC_UNIT_THREAD_0 = 0xe, /* target only */ + IIC_UNIT_THREAD_1 = 0xf, /* target only */ + IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */ + + /* Base numbers for the external interrupts */ + IIC_IRQ_EXT_IOIF0 = + IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0, + IIC_IRQ_EXT_IOIF1 = + IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1, + + /* Base numbers for the IIC_ISR interrupts */ + IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63, + IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62, + IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61, + IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60, + IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59, + + /* Which bits in IIC_ISR are edge sensitive */ + IIC_ISR_EDGE_MASK = 0x4ul, }; extern void iic_init_IRQ(void); @@ -52,7 +80,6 @@ extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); extern u8 iic_get_target_id(int cpu); -extern struct irq_host *iic_get_irq_host(int node); extern void spider_init_IRQ(void); diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 742a03282b440..608b1ebc56b28 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -243,7 +243,6 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) const u32 *imap, *tmp; int imaplen, intsize, unit; struct device_node *iic; - struct irq_host *iic_host; #if 0 /* Enable that when we have a way to retreive the node as well */ /* First, we check wether we have a real "interrupts" in the device @@ -289,11 +288,11 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) * the iic host from the iic OF node, but that way I'm still compatible * with really really old old firmwares for which we don't have a node */ - iic_host = iic_get_irq_host(pic->node_id); - if (iic_host == NULL) - return NO_IRQ; /* Manufacture an IIC interrupt number of class 2 */ - virq = irq_create_mapping(iic_host, 0x20 | unit); + virq = irq_create_mapping(NULL, + (pic->node_id << IIC_IRQ_NODE_SHIFT) | + (2 << IIC_IRQ_CLASS_SHIFT) | + unit); if (virq == NO_IRQ) printk(KERN_ERR "spider_pic: failed to map cascade !"); return virq; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3bd36d46ab4ae..f78680346e5fe 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -538,7 +538,7 @@ static void __iomem * __init map_spe_prop(struct spu *spu, const void *p; int proplen; - void* ret = NULL; + void __iomem *ret = NULL; int err = 0; p = get_property(n, name, &proplen); @@ -562,30 +562,29 @@ static void spu_unmap(struct spu *spu) iounmap(spu->priv2); iounmap(spu->priv1); iounmap(spu->problem); - iounmap((u8 __iomem *)spu->local_store); + iounmap((__force u8 __iomem *)spu->local_store); } /* This function shall be abstracted for HV platforms */ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) { - struct irq_host *host; unsigned int isrc; const u32 *tmp; - host = iic_get_irq_host(spu->node); - if (host == NULL) - return -ENODEV; - - /* Get the interrupt source from the device-tree */ + /* Get the interrupt source unit from the device-tree */ tmp = get_property(np, "isrc", NULL); if (!tmp) return -ENODEV; - spu->isrc = isrc = tmp[0]; + isrc = tmp[0]; + + /* Add the node number */ + isrc |= spu->node << IIC_IRQ_NODE_SHIFT; + spu->isrc = isrc; /* Now map interrupts of all 3 classes */ - spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc); - spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc); - spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc); + spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); + spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc); + spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc); /* Right now, we only fail if class 2 failed */ return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 58e794f9da1b6..51fd197ab5dd1 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1342,7 +1342,7 @@ static u64 spufs_id_get(void *data) return num; } -DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, 0, "0x%llx\n") +DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, NULL, "0x%llx\n") struct tree_descr spufs_dir_contents[] = { { "mem", &spufs_mem_fops, 0666, }, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index c8670f519734a..efc452e71ab0f 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -234,7 +234,7 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx) static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) { - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; int ret; spin_lock_irq(&ctx->spu->register_lock); @@ -263,7 +263,7 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx, struct mfc_dma_command *cmd) { u32 status; - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; spin_lock_irq(&ctx->spu->register_lock); out_be32(&prob->mfc_lsa_W, cmd->lsa); diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 1a2c2a50f9221..1983b640bac11 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -357,7 +357,7 @@ static int dma_and_signal_ce_msg(char *ce_msg, */ static int shutdown(void) { - int rc = kill_proc(1, SIGINT, 1); + int rc = kill_cad_pid(SIGINT, 1); if (rc) { printk(KERN_ALERT "mf.c: SIGINT to init failed (%d), " diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 3eb12065df23e..4aa165e010d91 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -262,14 +262,6 @@ void __init iSeries_pci_final_fixup(void) mf_display_src(0xC9000200); } -void pcibios_fixup_bus(struct pci_bus *PciBus) -{ -} - -void pcibios_fixup_resources(struct pci_dev *pdev) -{ -} - /* * Look down the chain to find the matching Device Device */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 7f1953066ff8f..a0ff7ba7d666a 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -649,15 +649,21 @@ static void iseries_dedicated_idle(void) void __init iSeries_init_IRQ(void) { } #endif +/* + * iSeries has no legacy IO, anything calling this function has to + * fail or bad things will happen + */ +static int iseries_check_legacy_ioport(unsigned int baseport) +{ + return -ENODEV; +} + static int __init iseries_probe(void) { unsigned long root = of_get_flat_dt_root(); if (!of_flat_dt_is_compatible(root, "IBM,iSeries")) return 0; - powerpc_firmware_features |= FW_FEATURE_ISERIES; - powerpc_firmware_features |= FW_FEATURE_LPAR; - hpte_init_iSeries(); return 1; @@ -680,6 +686,7 @@ define_machine(iseries) { .calibrate_decr = generic_calibrate_decr, .progress = iSeries_progress, .probe = iseries_probe, + .check_legacy_ioport = iseries_check_legacy_ioport, /* XXX Implement enable_pmcs for iSeries */ }; @@ -687,6 +694,9 @@ void * __init iSeries_early_setup(void) { unsigned long phys_mem_size; + powerpc_firmware_features |= FW_FEATURE_ISERIES; + powerpc_firmware_features |= FW_FEATURE_LPAR; + iSeries_fixup_klimit(); /* diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index c3aa46b8e2b9d..1b827618e05f9 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -96,14 +96,14 @@ static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off) 1UL; } -static unsigned long u3_agp_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) { unsigned int caddr; if (bus == hose->first_busno) { if (dev_fn < (11 << 3)) - return 0; + return NULL; caddr = u3_agp_cfa0(dev_fn, offset); } else caddr = u3_agp_cfa1(bus, dev_fn, offset); @@ -114,14 +114,14 @@ static unsigned long u3_agp_cfg_access(struct pci_controller* hose, } while (in_le32(hose->cfg_addr) != caddr); offset &= 0x07; - return ((unsigned long)hose->cfg_data) + offset; + return hose->cfg_data + offset; } static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -136,13 +136,13 @@ static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -152,7 +152,7 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -167,16 +167,16 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -198,22 +198,22 @@ static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off) return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL; } -static unsigned long u3_ht_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) { if (bus == hose->first_busno) { if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + u3_ht_cfa0(devfn, offset); + return NULL; + return hose->cfg_data + u3_ht_cfa0(devfn, offset); } else - return ((unsigned long)hose->cfg_data) + u3_ht_cfa1(bus, devfn, offset); + return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -232,13 +232,13 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -248,7 +248,7 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -266,16 +266,16 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -315,7 +315,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = ioremap(0xf2000000, 0x02000000); hose->first_busno = 0; hose->last_busno = 0xef; diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index ce1a235855f75..379db05b00824 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -111,8 +111,6 @@ void udbg_scc_init(int force_scc) pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch, PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); - - /* Setup for 57600 8N1 */ if (ch == ch_a) addr += 0x20; sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ; @@ -125,9 +123,21 @@ void udbg_scc_init(int force_scc) x = in_8(sccc); out_8(sccc, 0x09); /* reset A or B side */ out_8(sccc, 0xc0); + + /* If SCC was the OF output port, read the BRG value, else + * Setup for 57600 8N1 + */ + if (ch_def != NULL) { + out_8(sccc, 13); + scc_inittab[1] = in_8(sccc); + out_8(sccc, 12); + scc_inittab[3] = in_8(sccc); + } + for (i = 0; i < sizeof(scc_inittab); ++i) out_8(sccc, scc_inittab[i]); + udbg_putc = udbg_scc_putc; udbg_getc = udbg_scc_getc; udbg_getc_poll = udbg_scc_getc_poll; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 84bc8f7e17ef7..3c2d63ebf787f 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -225,6 +225,7 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag) void eeh_mark_slot (struct device_node *dn, int mode_flag) { + struct pci_dev *dev; dn = find_device_pe (dn); /* Back up one, since config addrs might be shared */ @@ -232,6 +233,12 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) dn = dn->parent; PCI_DN(dn)->eeh_mode |= mode_flag; + + /* Mark the pci device too */ + dev = PCI_DN(dn)->pcidev; + if (dev) + dev->error_state = pci_channel_io_frozen; + __eeh_mark_slot (dn->child, mode_flag); } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8ed362140452e..f82b13e531a3d 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -180,7 +180,7 @@ static void __init pseries_mpic_init_IRQ(void) cascade_irq = irq_of_parse_and_map(cascade, 0); if (cascade == NO_IRQ) { - printk(KERN_ERR "xics: failed to map cascade interrupt"); + printk(KERN_ERR "mpic: failed to map cascade interrupt"); return; } @@ -342,7 +342,7 @@ static int __init pSeries_init_panel(void) { /* Manually leave the kernel version on the panel. */ ppc_md.progress("Linux ppc64\n", 0); - ppc_md.progress(system_utsname.release, 0); + ppc_md.progress(init_utsname()->version, 0); return 0; } @@ -415,12 +415,6 @@ static int pSeries_check_legacy_ioport(unsigned int baseport) return -ENODEV; of_node_put(np); break; - case PARALLEL_BASE: - np = of_find_node_by_type(NULL, "parallel"); - if (np == NULL) - return -ENODEV; - of_node_put(np); - break; } return 0; } @@ -483,7 +477,6 @@ static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; - unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); /* * Indicate to the HV that we are idle. Now would be @@ -496,9 +489,9 @@ static void pseries_dedicated_idle_sleep(void) * has been checked recently. If we should poll for a little * while, do so. */ - if (*smt_snooze_delay) { + if (__get_cpu_var(smt_snooze_delay)) { start_snooze = get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; + __get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec; local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); @@ -518,24 +511,7 @@ static void pseries_dedicated_idle_sleep(void) goto out; } - /* - * If not SMT, cede processor. If CPU is running SMT - * cede if the other thread is not idle, so that it can - * go single-threaded. If the other thread is idle, - * we ask the hypervisor if it has pending work it - * wants to do and cede if it does. Otherwise we keep - * polling in order to reduce interrupt latency. - * - * Doing the cede when the other thread is active will - * result in this thread going dormant, meaning the other - * thread gets to run in single-threaded (ST) mode, which - * is slightly faster than SMT mode with this thread at - * very low priority. The cede enables interrupts, which - * doesn't matter here. - */ - if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle - || poll_pending() == H_PENDING) - cede_processor(); + cede_processor(); out: HMT_medium(); diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index e5e999ea891ad..91f052d8cce03 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,8 +12,14 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o +obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(ARCH),powerpc) +obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +endif diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c new file mode 100644 index 0000000000000..ec265995d5d8b --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -0,0 +1,309 @@ +/* + * General Purpose functions for the global management of the + * 8260 Communication Processor Module. + * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com> + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2.3.99 Updates + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mpc8260.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/cpm2.h> +#include <asm/rheap.h> +#include <asm/fs_pd.h> + +#include <sysdev/fsl_soc.h> + +static void cpm2_dpinit(void); +cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +cpm2_map_t *cpm2_immr; +intctl_cpm2_t *cpm2_intctl; + +#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount + of space for CPM as it is larger + than on PQ2 */ + +void +cpm2_reset(void) +{ + cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + cpm2_intctl = cpm2_map(im_intctl); + + /* Reclaim the DP memory for our use. + */ + cpm2_dpinit(); + + /* Tell everyone where the comm processor resides. + */ + cpmp = &cpm2_immr->im_cpm; +} + +/* Set a baud rate generator. This needs lots of work. There are + * eight BRGs, which can be connected to the CPM channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +#define BRG_INT_CLK (get_brgfreq()) +#define BRG_UART_CLK (BRG_INT_CLK/16) + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + if (brg < 4) { + bp = cpm2_map_size(im_brgc1, 16); + } else { + bp = cpm2_map_size(im_brgc5, 16); + brg -= 4; + } + bp += brg; + *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN; + + cpm2_unmap(bp); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +void +cpm2_fastbrg(uint brg, uint rate, int div16) +{ + volatile uint *bp; + + if (brg < 4) { + bp = cpm2_map_size(im_brgc1, 16); + } + else { + bp = cpm2_map_size(im_brgc5, 16); + brg -= 4; + } + bp += brg; + *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + if (div16) + *bp |= CPM_BRG_DIV16; + + cpm2_unmap(bp); +} + +int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int ret = 0; + int shift; + int i, bits = 0; + cpmux_t *im_cpmux; + u32 *reg; + u32 mask = 7; + u8 clk_map [24][3] = { + {CPM_CLK_FCC1, CPM_BRG5, 0}, + {CPM_CLK_FCC1, CPM_BRG6, 1}, + {CPM_CLK_FCC1, CPM_BRG7, 2}, + {CPM_CLK_FCC1, CPM_BRG8, 3}, + {CPM_CLK_FCC1, CPM_CLK9, 4}, + {CPM_CLK_FCC1, CPM_CLK10, 5}, + {CPM_CLK_FCC1, CPM_CLK11, 6}, + {CPM_CLK_FCC1, CPM_CLK12, 7}, + {CPM_CLK_FCC2, CPM_BRG5, 0}, + {CPM_CLK_FCC2, CPM_BRG6, 1}, + {CPM_CLK_FCC2, CPM_BRG7, 2}, + {CPM_CLK_FCC2, CPM_BRG8, 3}, + {CPM_CLK_FCC2, CPM_CLK13, 4}, + {CPM_CLK_FCC2, CPM_CLK14, 5}, + {CPM_CLK_FCC2, CPM_CLK15, 6}, + {CPM_CLK_FCC2, CPM_CLK16, 7}, + {CPM_CLK_FCC3, CPM_BRG5, 0}, + {CPM_CLK_FCC3, CPM_BRG6, 1}, + {CPM_CLK_FCC3, CPM_BRG7, 2}, + {CPM_CLK_FCC3, CPM_BRG8, 3}, + {CPM_CLK_FCC3, CPM_CLK13, 4}, + {CPM_CLK_FCC3, CPM_CLK14, 5}, + {CPM_CLK_FCC3, CPM_CLK15, 6}, + {CPM_CLK_FCC3, CPM_CLK16, 7} + }; + + im_cpmux = cpm2_map(im_cpmux); + + switch (target) { + case CPM_CLK_SCC1: + reg = &im_cpmux->cmx_scr; + shift = 24; + case CPM_CLK_SCC2: + reg = &im_cpmux->cmx_scr; + shift = 16; + break; + case CPM_CLK_SCC3: + reg = &im_cpmux->cmx_scr; + shift = 8; + break; + case CPM_CLK_SCC4: + reg = &im_cpmux->cmx_scr; + shift = 0; + break; + case CPM_CLK_FCC1: + reg = &im_cpmux->cmx_fcr; + shift = 24; + break; + case CPM_CLK_FCC2: + reg = &im_cpmux->cmx_fcr; + shift = 16; + break; + case CPM_CLK_FCC3: + reg = &im_cpmux->cmx_fcr; + shift = 8; + break; + default: + printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + if (mode == CPM_CLK_RX) + shift +=3; + + for (i=0; i<24; i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + if (i == sizeof(clk_map)/3) + ret = -EINVAL; + + bits <<= shift; + mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + cpm2_unmap(im_cpmux); + return ret; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; +static u8* im_dprambase; + +static void cpm2_dpinit(void) +{ + spin_lock_init(&cpm_dpmem_lock); + + im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); + + /* initialize the info header */ + rh_init(&cpm_dpmem_info, 1, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* Attach the usable dpmem area */ + /* XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE is only a subset of the available dpram. It + * varies with the processor and the microcode patches activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, + CPM_DATAONLY_SIZE); +} + +/* This function returns an index into the DPRAM area. + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +/* not sure if this is ever needed */ +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return (void *)(im_dprambase + offset); +} +EXPORT_SYMBOL(cpm_dpram_addr); diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c new file mode 100644 index 0000000000000..28b0189947463 --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -0,0 +1,256 @@ +/* + * Platform information definitions. + * + * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates + * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek. + * + * Author: Vitaly Bordug <vbordug@ru.mvista.com> + * + * 1999-2001 (c) Dan Malek <dan@embeddedalley.com> + * 2006 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* The CPM2 internal interrupt controller. It is usually + * the only interrupt controller. + * There are two 32-bit registers (high/low) for up to 64 + * possible interrupts. + * + * Now, the fun starts.....Interrupt Numbers DO NOT MAP + * in a simple arithmetic fashion to mask or pending registers. + * That is, interrupt 4 does not map to bit position 4. + * We create two tables, indexed by vector number, to indicate + * which register to use and which bit in the register to use. + */ + +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/irq.h> + +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/io.h> +#include <asm/prom.h> + +#include "cpm2_pic.h" + +static struct device_node *cpm2_pic_node; +static struct irq_host *cpm2_pic_host; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; + +static const u_char irq_to_siureg[] = { + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* bit numbers do not match the docs, these are precomputed so the bit for + * a given irq is (1 << irq_to_siubit[irq]) */ +static const u_char irq_to_siubit[] = { + 0, 15, 14, 13, 12, 11, 10, 9, + 8, 7, 6, 5, 4, 3, 2, 1, + 2, 1, 0, 14, 13, 12, 11, 10, + 9, 8, 7, 6, 5, 4, 3, 0, + 31, 30, 29, 28, 27, 26, 25, 24, + 23, 22, 21, 20, 19, 18, 17, 16, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, +}; + +static void cpm2_mask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_unmask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_mask_and_ack(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr, *sipnr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + sipnr = &(cpm2_intctl->ic_sipnrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; + sipnr[word] = 1 << bit; +} + +static void cpm2_end_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) { + + irq_nr -= CPM_IRQ_OFFSET; + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; + /* + * Work around large numbers of spurious IRQs on PowerPC 82xx + * systems. + */ + mb(); + } +} + +static struct irq_chip cpm2_pic = { + .typename = " CPM2 SIU ", + .enable = cpm2_unmask_irq, + .disable = cpm2_mask_irq, + .unmask = cpm2_unmask_irq, + .mask_ack = cpm2_mask_and_ack, + .end = cpm2_end_irq, +}; + +unsigned int cpm2_get_irq(struct pt_regs *regs) +{ + int irq; + unsigned long bits; + + /* For CPM2, read the SIVEC register and shift the bits down + * to get the irq number. */ + bits = cpm2_intctl->ic_sivec; + irq = bits >> 26; + + if (irq == 0) + return(-1); + return irq+CPM_IRQ_OFFSET; +} + +static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return cpm2_pic_node == NULL || cpm2_pic_node == node; +} + +static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq); + return 0; +} + +static void cpm2_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* Make sure irq is masked in hardware */ + cpm2_mask_irq(virq); + + /* remove chip and handler */ + set_irq_chip_and_handler(virq, NULL, NULL); +} + +static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static const unsigned char map_cpm2_senses[4] = { + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_cpm2_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + +static struct irq_host_ops cpm2_pic_host_ops = { + .match = cpm2_pic_host_match, + .map = cpm2_pic_host_map, + .unmap = cpm2_host_unmap, + .xlate = cpm2_pic_host_xlate, +}; + +void cpm2_pic_init(struct device_node *node) +{ + int i; + + /* Clear the CPM IRQ controller, in case it has any bits set + * from the bootloader + */ + + /* Mask out everything */ + + cpm2_intctl->ic_simrh = 0x00000000; + cpm2_intctl->ic_simrl = 0x00000000; + + wmb(); + + /* Ack everything */ + cpm2_intctl->ic_sipnrh = 0xffffffff; + cpm2_intctl->ic_sipnrl = 0xffffffff; + wmb(); + + /* Dummy read of the vector */ + i = cpm2_intctl->ic_sivec; + rmb(); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + cpm2_intctl->ic_sicr = 0; + cpm2_intctl->ic_scprrh = 0x05309770; + cpm2_intctl->ic_scprrl = 0x05309770; + + /* create a legacy host */ + if (node) + cpm2_pic_node = of_node_get(node); + + cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64); + if (cpm2_pic_host == NULL) { + printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); + return; + } +} diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h new file mode 100644 index 0000000000000..3c513e5a688e4 --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -0,0 +1,10 @@ +#ifndef _PPC_KERNEL_CPM2_H +#define _PPC_KERNEL_CPM2_H + +extern intctl_cpm2_t *cpm2_intctl; + +extern unsigned int cpm2_get_irq(struct pt_regs *regs); + +extern void cpm2_pic_init(struct device_node*); + +#endif /* _PPC_KERNEL_CPM2_H */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 92ba378b7990a..7d759f1c26b19 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -3,6 +3,9 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -20,15 +23,21 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> #include <asm/system.h> #include <asm/atomic.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/time.h> #include <asm/prom.h> #include <sysdev/fsl_soc.h> #include <mm/mmu_decl.h> +#include <asm/cpm2.h> +extern void init_fcc_ioports(struct fs_platform_info*); +extern void init_scc_ioports(struct fs_uart_platform_info*); static phys_addr_t immrbase = -1; phys_addr_t get_immrbase(void) @@ -42,7 +51,9 @@ phys_addr_t get_immrbase(void) if (soc) { unsigned int size; const void *prop = get_property(soc, "reg", &size); - immrbase = of_translate_address(soc, prop); + + if (prop) + immrbase = of_translate_address(soc, prop); of_node_put(soc); }; @@ -51,6 +62,59 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); +#ifdef CONFIG_CPM2 + +static u32 brgfreq = -1; + +u32 get_brgfreq(void) +{ + struct device_node *node; + + if (brgfreq != -1) + return brgfreq; + + node = of_find_node_by_type(NULL, "cpm"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "brg-frequency", + &size); + + if (prop) + brgfreq = *prop; + of_node_put(node); + }; + + return brgfreq; +} + +EXPORT_SYMBOL(get_brgfreq); + +static u32 fs_baudrate = -1; + +u32 get_baudrate(void) +{ + struct device_node *node; + + if (fs_baudrate != -1) + return fs_baudrate; + + node = of_find_node_by_type(NULL, "serial"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "current-speed", + &size); + + if (prop) + fs_baudrate = *prop; + of_node_put(node); + }; + + return fs_baudrate; +} + +EXPORT_SYMBOL(get_baudrate); +#endif /* CONFIG_CPM2 */ + static int __init gfar_mdio_of_init(void) { struct device_node *np; @@ -85,8 +149,11 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - const u32 *id = get_property(child, "reg", NULL); - mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); + int irq = irq_of_parse_and_map(child, 0); + if (irq != NO_IRQ) { + const u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq; + } } ret = @@ -128,7 +195,7 @@ static int __init gfar_of_init(void) const char *model; const void *mac_addr; const phandle *ph; - int n_res = 1; + int n_res = 2; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -159,7 +226,7 @@ static int __init gfar_of_init(void) gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - n_res + 1); + n_res); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -478,3 +545,255 @@ err: } arch_initcall(fsl_usb_of_init); + +#ifdef CONFIG_CPM2 + +static const char fcc_regs[] = "fcc_regs"; +static const char fcc_regs_c[] = "fcc_regs_c"; +static const char fcc_pram[] = "fcc_pram"; +static char bus_id[9][BUS_ID_SIZE]; + +static int __init fs_enet_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *fs_enet_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; + i++) { + struct resource r[4]; + struct device_node *phy, *mdio; + struct fs_platform_info fs_enet_data; + const unsigned int *id, *phy_addr, phy_irq; + const void *mac_addr; + const phandle *ph; + const char *model; + + memset(r, 0, sizeof(r)); + memset(&fs_enet_data, 0, sizeof(fs_enet_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + r[0].name = fcc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = fcc_pram; + + ret = of_address_to_resource(np, 2, &r[2]); + if (ret) + goto err; + r[2].name = fcc_regs_c; + fs_enet_data.fcc_regs_c = r[2].start; + + r[3].start = r[3].end = irq_of_parse_and_map(np, 0); + r[3].flags = IORESOURCE_IRQ; + + fs_enet_dev = + platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); + + if (IS_ERR(fs_enet_dev)) { + ret = PTR_ERR(fs_enet_dev); + goto err; + } + + model = get_property(np, "model", NULL); + if (model == NULL) { + ret = -ENODEV; + goto unreg; + } + + mac_addr = get_property(np, "mac-address", NULL); + memcpy(fs_enet_data.macaddr, mac_addr, 6); + + ph = get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + phy_addr = get_property(phy, "reg", NULL); + fs_enet_data.phy_addr = *phy_addr; + + phy_irq = get_property(phy, "interrupts", NULL); + + id = get_property(np, "device-id", NULL); + fs_enet_data.fs_no = *id; + strcpy(fs_enet_data.fs_type, model); + + mdio = of_get_parent(phy); + ret = of_address_to_resource(mdio, 0, &res); + if (ret) { + of_node_put(phy); + of_node_put(mdio); + goto unreg; + } + + fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + + if (strstr(model, "FCC")) { + int fcc_index = *id - 1; + unsigned char* mdio_bb_prop; + + fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); + fs_enet_data.rx_ring = 32; + fs_enet_data.tx_ring = 32; + fs_enet_data.rx_copybreak = 240; + fs_enet_data.use_napi = 0; + fs_enet_data.napi_weight = 17; + fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index); + fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index); + fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index); + + snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", + (u32)res.start, fs_enet_data.phy_addr); + fs_enet_data.bus_id = (char*)&bus_id[(*id)]; + fs_enet_data.init_ioports = init_fcc_ioports; + + mdio_bb_prop = get_property(phy, "bitbang", NULL); + if (mdio_bb_prop) { + struct platform_device *fs_enet_mdio_bb_dev; + struct fs_mii_bb_platform_info fs_enet_mdio_bb_data; + + fs_enet_mdio_bb_dev = + platform_device_register_simple("fsl-bb-mdio", + i, NULL, 0); + memset(&fs_enet_mdio_bb_data, 0, + sizeof(struct fs_mii_bb_platform_info)); + fs_enet_mdio_bb_data.mdio_dat.bit = + mdio_bb_prop[0]; + fs_enet_mdio_bb_data.mdio_dir.bit = + mdio_bb_prop[1]; + fs_enet_mdio_bb_data.mdc_dat.bit = + mdio_bb_prop[2]; + fs_enet_mdio_bb_data.mdio_port = + mdio_bb_prop[3]; + fs_enet_mdio_bb_data.mdc_port = + mdio_bb_prop[4]; + fs_enet_mdio_bb_data.delay = + mdio_bb_prop[5]; + + fs_enet_mdio_bb_data.irq[0] = phy_irq[0]; + fs_enet_mdio_bb_data.irq[1] = -1; + fs_enet_mdio_bb_data.irq[2] = -1; + fs_enet_mdio_bb_data.irq[3] = phy_irq[0]; + fs_enet_mdio_bb_data.irq[31] = -1; + + fs_enet_mdio_bb_data.mdio_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + fs_enet_mdio_bb_data.mdio_dir.offset = + (u32)&cpm2_immr->im_ioport.iop_pdirc; + fs_enet_mdio_bb_data.mdc_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + ret = platform_device_add_data( + fs_enet_mdio_bb_dev, + &fs_enet_mdio_bb_data, + sizeof(struct fs_mii_bb_platform_info)); + if (ret) + goto unreg; + } + + of_node_put(phy); + of_node_put(mdio); + + ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, + sizeof(struct + fs_platform_info)); + if (ret) + goto unreg; + } + return 0; + +unreg: + platform_device_unregister(fs_enet_dev); +err: + return ret; +} + +arch_initcall(fs_enet_of_init); + +static const char scc_regs[] = "regs"; +static const char scc_pram[] = "pram"; + +static int __init cpm_uart_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *cpm_uart_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; + i++) { + struct resource r[3]; + struct fs_uart_platform_info cpm_uart_data; + const int *id; + const char *model; + + memset(r, 0, sizeof(r)); + memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[0].name = scc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = scc_pram; + + r[2].start = r[2].end = irq_of_parse_and_map(np, 0); + r[2].flags = IORESOURCE_IRQ; + + cpm_uart_dev = + platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); + + if (IS_ERR(cpm_uart_dev)) { + ret = PTR_ERR(cpm_uart_dev); + goto err; + } + + id = get_property(np, "device-id", NULL); + cpm_uart_data.fs_no = *id; + + model = (char*)get_property(np, "model", NULL); + strcpy(cpm_uart_data.fs_type, model); + + cpm_uart_data.uart_clk = ppc_proc_freq; + + cpm_uart_data.tx_num_fifo = 4; + cpm_uart_data.tx_buf_size = 32; + cpm_uart_data.rx_num_fifo = 4; + cpm_uart_data.rx_buf_size = 32; + cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + + ret = + platform_device_add_data(cpm_uart_dev, &cpm_uart_data, + sizeof(struct + fs_uart_platform_info)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(cpm_uart_dev); +err: + return ret; +} + +arch_initcall(cpm_uart_of_init); +#endif /* CONFIG_CPM2 */ diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 5a3dd480d2fd8..04e145b5fc324 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -5,6 +5,8 @@ #include <asm/mmu.h> extern phys_addr_t get_immrbase(void); +extern u32 get_brgfreq(void); +extern u32 get_baudrate(void); #endif #endif diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 0251b7c68d0e9..6ebdae8e6f692 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -1,5 +1,5 @@ /* - * include/asm-ppc/ipic.c + * arch/powerpc/sysdev/ipic.c * * IPIC routines implementations. * diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 723972bb5bd9c..3ee03a9a98fa2 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -341,7 +341,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); if (id == PCI_CAP_ID_HT) { id = readb(devbase + pos + 3); - if (id == 0x80) + if (id == HT_CAPTYPE_IRQ) break; } } diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig new file mode 100644 index 0000000000000..a725e80befa8e --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -0,0 +1,30 @@ +# +# QE Communication options +# + +menu "QE Options" + depends on QUICC_ENGINE + +config UCC_SLOW + bool "UCC Slow Protocols Support" + default n + select UCC + help + This option provides qe_lib support to UCC slow + protocols: UART, BISYNC, QMC + +config UCC_FAST + bool "UCC Fast Protocols Support" + default n + select UCC + select UCC_SLOW + help + This option provides qe_lib support to UCC fast + protocols: HDLC, Ethernet, ATM, transparent + +config UCC + bool + default y if UCC_FAST || UCC_SLOW + +endmenu + diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile new file mode 100644 index 0000000000000..874fe1a5b1cfe --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux ppc-specific parts of QE +# +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o + +obj-$(CONFIG_UCC) += ucc.o +obj-$(CONFIG_UCC_SLOW) += ucc_slow.o +obj-$(CONFIG_UCC_FAST) += ucc_fast.o diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c new file mode 100644 index 0000000000000..2bae632d3ad78 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -0,0 +1,353 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/bootmem.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/immap_qe.h> +#include <asm/qe.h> +#include <asm/prom.h> +#include <asm/rheap.h> + +static void qe_snums_init(void); +static void qe_muram_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); + +/* QE snum state */ +enum qe_snum_state { + QE_SNUM_STATE_USED, + QE_SNUM_STATE_FREE +}; + +/* QE snum */ +struct qe_snum { + u8 num; + enum qe_snum_state state; +}; + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap *qe_immr = NULL; +EXPORT_SYMBOL(qe_immr); + +static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ + +static phys_addr_t qebase = -1; + +phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + + if (qebase != -1) + return qebase; + + qe = of_find_node_by_type(NULL, "qe"); + if (qe) { + unsigned int size; + const void *prop = get_property(qe, "reg", &size); + qebase = of_translate_address(qe, prop); + of_node_put(qe); + }; + + return qebase; +} + +EXPORT_SYMBOL(get_qe_base); + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + out_be32(&qe_immr->cp.cecdr, + immrbar_virt_to_phys((void *)cmd_input)); + out_be32(&qe_immr->cp.cecr, + (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) + mcn_protocol << mcn_shift)); + } + + /* wait for the QE_CR_FLG to clear */ + while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) + cpu_relax(); + spin_unlock_irqrestore(&qe_lock, flags); + + return 0; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +unsigned int get_brg_clk(void) +{ + struct device_node *qe; + if (brg_clk) + return brg_clk; + + qe = of_find_node_by_type(NULL, "qe"); + if (qe) { + unsigned int size; + const u32 *prop = get_property(qe, "brg-frequency", &size); + brg_clk = *prop; + of_node_put(qe); + }; + return brg_clk; +} + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void qe_setbrg(u32 brg, u32 rate) +{ + volatile u32 *bp; + u32 divisor, tempval; + int div16 = 0; + + bp = &qe_immr->brg.brgc1; + bp += brg; + + divisor = (get_brg_clk() / rate); + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = 1; + divisor /= 16; + } + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; + if (div16) + tempval |= QE_BRGC_DIV16; + + out_be32(bp, tempval); +} + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + int i; + static const u8 snum_init[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, + }; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + snums[i].num = snum_init[i]; + snums[i].state = QE_SNUM_STATE_FREE; + } +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma *sdma = &qe_immr->sdma; + u32 sdma_buf_offset; + + if (!sdma) + return -ENODEV; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + sdma_buf_offset = qe_muram_alloc(512 * 2, 64); + if (IS_MURAM_ERR(sdma_buf_offset)) + return -ENOMEM; + + out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK); + out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >> + QE_SDMR_CEN_SHIFT))); + + return 0; +} + +/* + * muram_alloc / muram_free bits. + */ +static DEFINE_SPINLOCK(qe_muram_lock); + +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t qe_boot_muram_rh_block[16]; +static rh_info_t qe_muram_info; + +static void qe_muram_init(void) +{ + struct device_node *np; + u32 address; + u64 size; + unsigned int flags; + + /* initialize the info header */ + rh_init(&qe_muram_info, 1, + sizeof(qe_boot_muram_rh_block) / + sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block); + + /* Attach the usable muram area */ + /* XXX: This is a subset of the available muram. It + * varies with the processor and the microcode patches activated. + */ + if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) { + address = *of_get_address(np, 0, &size, &flags); + of_node_put(np); + rh_attach_region(&qe_muram_info, + (void *)address, (int)size); + } +} + +/* This function returns an index into the MURAM area. + */ +u32 qe_muram_alloc(u32 size, u32 align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + start = rh_alloc_align(&qe_muram_info, size, align, "QE"); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return (u32) start; +} +EXPORT_SYMBOL(qe_muram_alloc); + +int qe_muram_free(u32 offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + ret = rh_free(&qe_muram_info, (void *)offset); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return ret; +} +EXPORT_SYMBOL(qe_muram_free); + +/* not sure if this is ever needed */ +u32 qe_muram_alloc_fixed(u32 offset, u32 size) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return (u32) start; +} +EXPORT_SYMBOL(qe_muram_alloc_fixed); + +void qe_muram_dump(void) +{ + rh_dump(&qe_muram_info); +} +EXPORT_SYMBOL(qe_muram_dump); + +void *qe_muram_addr(u32 offset) +{ + return (void *)&qe_immr->muram[offset]; +} +EXPORT_SYMBOL(qe_muram_addr); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c new file mode 100644 index 0000000000000..c229d07d49576 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -0,0 +1,555 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.c + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * QUICC ENGINE Interrupt Controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/sysdev.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/spinlock.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/qe_ic.h> + +#include "qe_ic.h" + +static DEFINE_SPINLOCK(qe_ic_lock); + +static struct qe_ic_info qe_ic_info[] = { + [1] = { + .mask = 0x00008000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPWCC, + }, + [2] = { + .mask = 0x00004000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPWCC, + }, + [3] = { + .mask = 0x00002000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPWCC, + }, + [10] = { + .mask = 0x00000040, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPZCC, + }, + [11] = { + .mask = 0x00000020, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPZCC, + }, + [12] = { + .mask = 0x00000010, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPZCC, + }, + [13] = { + .mask = 0x00000008, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPZCC, + }, + [14] = { + .mask = 0x00000004, + .mask_reg = QEIC_CIMR, + .pri_code = 5, + .pri_reg = QEIC_CIPZCC, + }, + [15] = { + .mask = 0x00000002, + .mask_reg = QEIC_CIMR, + .pri_code = 6, + .pri_reg = QEIC_CIPZCC, + }, + [20] = { + .mask = 0x10000000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTA, + }, + [25] = { + .mask = 0x00800000, + .mask_reg = QEIC_CRIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPRTB, + }, + [26] = { + .mask = 0x00400000, + .mask_reg = QEIC_CRIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPRTB, + }, + [27] = { + .mask = 0x00200000, + .mask_reg = QEIC_CRIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPRTB, + }, + [28] = { + .mask = 0x00100000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTB, + }, + [32] = { + .mask = 0x80000000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPXCC, + }, + [33] = { + .mask = 0x40000000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPXCC, + }, + [34] = { + .mask = 0x20000000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPXCC, + }, + [35] = { + .mask = 0x10000000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPXCC, + }, + [36] = { + .mask = 0x08000000, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPXCC, + }, + [40] = { + .mask = 0x00800000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPYCC, + }, + [41] = { + .mask = 0x00400000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPYCC, + }, + [42] = { + .mask = 0x00200000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPYCC, + }, + [43] = { + .mask = 0x00100000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPYCC, + }, +}; + +static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg) +{ + return in_be32(base + (reg >> 2)); +} + +static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg, + u32 value) +{ + out_be32(base + (reg >> 2), value); +} + +static inline struct qe_ic *qe_ic_from_irq(unsigned int virq) +{ + return irq_desc[virq].chip_data; +} + +#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + +static void qe_ic_unmask_irq(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp | qe_ic_info[src].mask); + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq_and_ack(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + /* There is nothing to do for ack here, ack is handled in ISR */ + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static struct irq_chip qe_ic_irq_chip = { + .typename = " QEIC ", + .unmask = qe_ic_unmask_irq, + .mask = qe_ic_mask_irq, + .mask_ack = qe_ic_mask_irq_and_ack, +}; + +static int qe_ic_host_match(struct irq_host *h, struct device_node *node) +{ + struct qe_ic *qe_ic = h->host_data; + + /* Exact match, unless qe_ic node is NULL */ + return qe_ic->of_node == NULL || qe_ic->of_node == node; +} + +static int qe_ic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct qe_ic *qe_ic = h->host_data; + struct irq_chip *chip; + + if (qe_ic_info[hw].mask == 0) { + printk(KERN_ERR "Can't map reserved IRQ \n"); + return -EINVAL; + } + /* Default chip */ + chip = &qe_ic->hc_irq; + + set_irq_chip_data(virq, qe_ic); + get_irq_desc(virq)->status |= IRQ_LEVEL; + + set_irq_chip_and_handler(virq, chip, handle_level_irq); + + return 0; +} + +static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 * intspec, unsigned int intsize, + irq_hw_number_t * out_hwirq, + unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops qe_ic_host_ops = { + .match = qe_ic_host_match, + .map = qe_ic_host_map, + .xlate = qe_ic_host_xlate, +}; + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* FIXME: We mask all the QE Low interrupts while handling. We should + * let other interrupt come in, but BAD interrupts are generated */ +void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct qe_ic *qe_ic = desc->handler_data; + struct irq_chip *chip = irq_desc[irq].chip; + + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs); + + chip->mask_ack(irq); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + chip->unmask(irq); +} + +/* FIXME: We mask all the QE High interrupts while handling. We should + * let other interrupt come in, but BAD interrupts are generated */ +void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct qe_ic *qe_ic = desc->handler_data; + struct irq_chip *chip = irq_desc[irq].chip; + + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs); + + chip->mask_ack(irq); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + chip->unmask(irq); +} + +void __init qe_ic_init(struct device_node *node, unsigned int flags) +{ + struct qe_ic *qe_ic; + struct resource res; + u32 temp = 0, ret, high_active = 0; + + qe_ic = alloc_bootmem(sizeof(struct qe_ic)); + if (qe_ic == NULL) + return; + + memset(qe_ic, 0, sizeof(struct qe_ic)); + qe_ic->of_node = node ? of_node_get(node) : NULL; + + qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + NR_QE_IC_INTS, &qe_ic_host_ops, 0); + if (qe_ic->irqhost == NULL) { + of_node_put(node); + return; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; + + qe_ic->regs = ioremap(res.start, res.end - res.start + 1); + + qe_ic->irqhost->host_data = qe_ic; + qe_ic->hc_irq = qe_ic_irq_chip; + + qe_ic->virq_high = irq_of_parse_and_map(node, 0); + qe_ic->virq_low = irq_of_parse_and_map(node, 1); + + if (qe_ic->virq_low == NO_IRQ) { + printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + return; + } + + /* default priority scheme is grouped. If spread mode is */ + /* required, configure cicr accordingly. */ + if (flags & QE_IC_SPREADMODE_GRP_W) + temp |= CICR_GWCC; + if (flags & QE_IC_SPREADMODE_GRP_X) + temp |= CICR_GXCC; + if (flags & QE_IC_SPREADMODE_GRP_Y) + temp |= CICR_GYCC; + if (flags & QE_IC_SPREADMODE_GRP_Z) + temp |= CICR_GZCC; + if (flags & QE_IC_SPREADMODE_GRP_RISCA) + temp |= CICR_GRTA; + if (flags & QE_IC_SPREADMODE_GRP_RISCB) + temp |= CICR_GRTB; + + /* choose destination signal for highest priority interrupt */ + if (flags & QE_IC_HIGH_SIGNAL) { + temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT); + high_active = 1; + } + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); + + set_irq_data(qe_ic->virq_low, qe_ic); + set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low); + + if (qe_ic->virq_high != NO_IRQ) { + set_irq_data(qe_ic->virq_high, qe_ic); + set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high); + } + + printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs); +} + +void qe_ic_set_highest_priority(unsigned int virq, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp = 0; + + temp = qe_ic_read(qe_ic->regs, QEIC_CICR); + + temp &= ~CICR_HP_MASK; + temp |= src << CICR_HP_SHIFT; + + temp &= ~CICR_HPIT_MASK; + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT; + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); +} + +/* Set Priority level within its group, from 1 to 8 */ +int qe_ic_set_priority(unsigned int virq, unsigned int priority) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp; + + if (priority > 8 || priority == 0) + return -EINVAL; + if (src > 127) + return -EINVAL; + if (qe_ic_info[src].pri_reg == 0) + return -EINVAL; + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg); + + if (priority < 4) { + temp &= ~(0x7 << (32 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (32 - priority * 3); + } else { + temp &= ~(0x7 << (24 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (24 - priority * 3); + } + + qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp); + + return 0; +} + +/* Set a QE priority to use high irq, only priority 1~2 can use high irq */ +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp, control_reg = QEIC_CICNR, shift = 0; + + if (priority > 2 || priority == 0) + return -EINVAL; + + switch (qe_ic_info[src].pri_reg) { + case QEIC_CIPZCC: + shift = CICNR_ZCC1T_SHIFT; + break; + case QEIC_CIPWCC: + shift = CICNR_WCC1T_SHIFT; + break; + case QEIC_CIPYCC: + shift = CICNR_YCC1T_SHIFT; + break; + case QEIC_CIPXCC: + shift = CICNR_XCC1T_SHIFT; + break; + case QEIC_CIPRTA: + shift = CRICR_RTA1T_SHIFT; + control_reg = QEIC_CRICR; + break; + case QEIC_CIPRTB: + shift = CRICR_RTB1T_SHIFT; + control_reg = QEIC_CRICR; + break; + default: + return -EINVAL; + } + + shift += (2 - priority) * 2; + temp = qe_ic_read(qe_ic->regs, control_reg); + temp &= ~(SIGNAL_MASK << shift); + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift; + qe_ic_write(qe_ic->regs, control_reg, temp); + + return 0; +} + +static struct sysdev_class qe_ic_sysclass = { + set_kset_name("qe_ic"), +}; + +static struct sys_device device_qe_ic = { + .id = 0, + .cls = &qe_ic_sysclass, +}; + +static int __init init_qe_ic_sysfs(void) +{ + int rc; + + printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); + + rc = sysdev_class_register(&qe_ic_sysclass); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys class\n"); + return -ENODEV; + } + rc = sysdev_register(&device_qe_ic); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys device\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_qe_ic_sysfs); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h new file mode 100644 index 0000000000000..9a631adb189d8 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h @@ -0,0 +1,106 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.h + * + * QUICC ENGINE Interrupt Controller Header + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _POWERPC_SYSDEV_QE_IC_H +#define _POWERPC_SYSDEV_QE_IC_H + +#include <asm/qe_ic.h> + +#define NR_QE_IC_INTS 64 + +/* QE IC registers offset */ +#define QEIC_CICR 0x00 +#define QEIC_CIVEC 0x04 +#define QEIC_CRIPNR 0x08 +#define QEIC_CIPNR 0x0c +#define QEIC_CIPXCC 0x10 +#define QEIC_CIPYCC 0x14 +#define QEIC_CIPWCC 0x18 +#define QEIC_CIPZCC 0x1c +#define QEIC_CIMR 0x20 +#define QEIC_CRIMR 0x24 +#define QEIC_CICNR 0x28 +#define QEIC_CIPRTA 0x30 +#define QEIC_CIPRTB 0x34 +#define QEIC_CRICR 0x3c +#define QEIC_CHIVEC 0x60 + +/* Interrupt priority registers */ +#define CIPCC_SHIFT_PRI0 29 +#define CIPCC_SHIFT_PRI1 26 +#define CIPCC_SHIFT_PRI2 23 +#define CIPCC_SHIFT_PRI3 20 +#define CIPCC_SHIFT_PRI4 13 +#define CIPCC_SHIFT_PRI5 10 +#define CIPCC_SHIFT_PRI6 7 +#define CIPCC_SHIFT_PRI7 4 + +/* CICR priority modes */ +#define CICR_GWCC 0x00040000 +#define CICR_GXCC 0x00020000 +#define CICR_GYCC 0x00010000 +#define CICR_GZCC 0x00080000 +#define CICR_GRTA 0x00200000 +#define CICR_GRTB 0x00400000 +#define CICR_HPIT_SHIFT 8 +#define CICR_HPIT_MASK 0x00000300 +#define CICR_HP_SHIFT 24 +#define CICR_HP_MASK 0x3f000000 + +/* CICNR */ +#define CICNR_WCC1T_SHIFT 20 +#define CICNR_ZCC1T_SHIFT 28 +#define CICNR_YCC1T_SHIFT 12 +#define CICNR_XCC1T_SHIFT 4 + +/* CRICR */ +#define CRICR_RTA1T_SHIFT 20 +#define CRICR_RTB1T_SHIFT 28 + +/* Signal indicator */ +#define SIGNAL_MASK 3 +#define SIGNAL_HIGH 2 +#define SIGNAL_LOW 0 + +struct qe_ic { + /* Control registers offset */ + volatile u32 __iomem *regs; + + /* The remapper for this QEIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* The device node of the interrupt controller */ + struct device_node *of_node; + + /* VIRQ numbers of QE high/low irqs */ + unsigned int virq_high; + unsigned int virq_low; +}; + +/* + * QE interrupt controller internal structure + */ +struct qe_ic_info { + u32 mask; /* location of this source at the QIMR register. */ + u32 mask_reg; /* Mask register offset */ + u8 pri_code; /* for grouped interrupts sources - the interrupt + code as appears at the group priority register */ + u32 pri_reg; /* Group priority register offset */ +}; + +#endif /* _POWERPC_SYSDEV_QE_IC_H */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c new file mode 100644 index 0000000000000..aea4359703892 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -0,0 +1,226 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_io.c + * + * QE Parallel I/O ports configuration routines + * + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Li Yang <LeoLi@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#undef DEBUG + +#define NUM_OF_PINS 32 + +struct port_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +}; + +static struct port_regs *par_io = NULL; +static int num_par_io_ports = 0; + +int par_io_init(struct device_node *np) +{ + struct resource res; + int ret; + const u32 *num_ports; + + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + par_io = ioremap(res.start, res.end - res.start + 1); + + num_ports = get_property(np, "num-ports", NULL); + if (num_ports) + num_par_io_ports = *num_ports; + + return 0; +} + +int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) +{ + u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val; + + if (!par_io) + return -1; + + /* calculate pin location for single and 2 bits information */ + pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1))); + + /* Set open drain, if required */ + tmp_val = in_be32(&par_io[port].cpodr); + if (open_drain) + out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val); + else + out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val); + + /* define direction */ + tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ? + in_be32(&par_io[port].cpdir2) : + in_be32(&par_io[port].cpdir1); + + /* get all bits mask for 2 bit per port */ + pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + + /* Get the final mask we need for the right definition */ + new_mask2bits = (u32) (dir << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + + /* clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS / 2) - 1) { + out_be32(&par_io[port].cpdir2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io[port].cpdir1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val); + } + /* define pin assignment */ + tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ? + in_be32(&par_io[port].cppar2) : + in_be32(&par_io[port].cppar1); + + new_mask2bits = (u32) (assignment << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + /* clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS / 2) - 1) { + out_be32(&par_io[port].cppar2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io[port].cppar1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val); + } + + return 0; +} +EXPORT_SYMBOL(par_io_config_pin); + +int par_io_data_set(u8 port, u8 pin, u8 val) +{ + u32 pin_mask, tmp_val; + + if (port >= num_par_io_ports) + return -EINVAL; + if (pin >= NUM_OF_PINS) + return -EINVAL; + /* calculate pin location */ + pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin)); + + tmp_val = in_be32(&par_io[port].cpdata); + + if (val == 0) /* clear */ + out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val); + else /* set */ + out_be32(&par_io[port].cpdata, pin_mask | tmp_val); + + return 0; +} +EXPORT_SYMBOL(par_io_data_set); + +int par_io_of_config(struct device_node *np) +{ + struct device_node *pio; + const phandle *ph; + int pio_map_len; + const unsigned int *pio_map; + + if (par_io == NULL) { + printk(KERN_ERR "par_io not initialized \n"); + return -1; + } + + ph = get_property(np, "pio-handle", NULL); + if (ph == 0) { + printk(KERN_ERR "pio-handle not available \n"); + return -1; + } + + pio = of_find_node_by_phandle(*ph); + + pio_map = get_property(pio, "pio-map", &pio_map_len); + if (pio_map == NULL) { + printk(KERN_ERR "pio-map is not set! \n"); + return -1; + } + pio_map_len /= sizeof(unsigned int); + if ((pio_map_len % 6) != 0) { + printk(KERN_ERR "pio-map format wrong! \n"); + return -1; + } + + while (pio_map_len > 0) { + par_io_config_pin((u8) pio_map[0], (u8) pio_map[1], + (int) pio_map[2], (int) pio_map[3], + (int) pio_map[4], (int) pio_map[5]); + pio_map += 6; + pio_map_len -= 6; + } + of_node_put(pio); + return 0; +} +EXPORT_SYMBOL(par_io_of_config); + +#ifdef DEBUG +static void dump_par_io(void) +{ + int i; + + printk(KERN_INFO "PAR IO registars:\n"); + printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io); + for (i = 0; i < num_par_io_ports; i++) { + printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpodr, + in_be32(&par_io[i].cpodr)); + printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdata, + in_be32(&par_io[i].cpdata)); + printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdir1, + in_be32(&par_io[i].cpdir1)); + printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdir2, + in_be32(&par_io[i].cpdir2)); + printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cppar1, + in_be32(&par_io[i].cppar1)); + printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cppar2, + in_be32(&par_io[i].cppar2)); + } + +} +EXPORT_SYMBOL(dump_par_io); +#endif /* DEBUG */ diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c new file mode 100644 index 0000000000000..916c9e5df57fa --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -0,0 +1,251 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc.c + * + * QE UCC API Set - UCC specific routines implementations. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> + +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/immap_qe.h> +#include <asm/qe.h> +#include <asm/ucc.h> + +static DEFINE_SPINLOCK(ucc_lock); + +int ucc_set_qe_mux_mii_mng(int ucc_num) +{ + unsigned long flags; + + spin_lock_irqsave(&ucc_lock, flags); + out_be32(&qe_immr->qmx.cmxgcr, + ((in_be32(&qe_immr->qmx.cmxgcr) & + ~QE_CMXGCR_MII_ENET_MNG) | + (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT))); + spin_unlock_irqrestore(&ucc_lock, flags); + + return 0; +} + +int ucc_set_type(int ucc_num, struct ucc_common *regs, + enum ucc_speed_type speed) +{ + u8 guemr = 0; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + guemr = regs->guemr; + guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX); + switch (speed) { + case UCC_SPEED_TYPE_SLOW: + guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX); + break; + case UCC_SPEED_TYPE_FAST: + guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX); + break; + default: + return -EINVAL; + } + regs->guemr = guemr; + + return 0; +} + +int ucc_init_guemr(struct ucc_common *regs) +{ + u8 guemr = 0; + + if (!regs) + return -EINVAL; + + /* Set bit 3 (which is reserved in the GUEMR register) to 1 */ + guemr = UCC_GUEMR_SET_RESERVED3; + + regs->guemr = guemr; + + return 0; +} + +static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num, + u8 * shift) +{ + switch (ucc_num) { + case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 16; + break; + case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 0; + break; + case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 16; + break; + case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 0; + break; + case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 16; + break; + case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 0; + break; + case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 16; + break; + case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 0; + break; + default: + break; + } +} + +int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask) +{ + volatile u32 *p_cmxucr; + u8 reg_num; + u8 shift; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + + if (set) + out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift)); + else + out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift)); + + return 0; +} + +int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) +{ + volatile u32 *p_cmxucr; + u8 reg_num; + u8 shift; + u32 clock_bits; + u32 clock_mask; + int source = -1; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { + printk(KERN_ERR + "ucc_set_qe_mux_rxtx: bad comm mode type passed."); + return -EINVAL; + } + + get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + + switch (reg_num) { + case 1: + switch (clock) { + case QE_BRG1: source = 1; break; + case QE_BRG2: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK9: source = 5; break; + case QE_CLK10: source = 6; break; + case QE_CLK11: source = 7; break; + case QE_CLK12: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 2: + switch (clock) { + case QE_BRG5: source = 1; break; + case QE_BRG6: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK13: source = 5; break; + case QE_CLK14: source = 6; break; + case QE_CLK19: source = 7; break; + case QE_CLK20: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 3: + switch (clock) { + case QE_BRG9: source = 1; break; + case QE_BRG10: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK3: source = 5; break; + case QE_CLK4: source = 6; break; + case QE_CLK17: source = 7; break; + case QE_CLK18: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + default: source = -1; break; + } + break; + case 4: + switch (clock) { + case QE_BRG13: source = 1; break; + case QE_BRG14: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK5: source = 5; break; + case QE_CLK6: source = 6; break; + case QE_CLK21: source = 7; break; + case QE_CLK22: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + default: source = -1; break; + } + break; + default: + source = -1; + break; + } + + if (source == -1) { + printk(KERN_ERR + "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC."); + return -ENOENT; + } + + clock_bits = (u32) source; + clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK; + if (mode == COMM_DIR_RX) { + clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */ + clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */ + } + clock_bits <<= shift; + clock_mask <<= shift; + + out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits); + + return 0; +} diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c new file mode 100644 index 0000000000000..c2be7348fcbd8 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -0,0 +1,396 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc_fast.c + * + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/immap_qe.h> +#include <asm/qe.h> + +#include <asm/ucc.h> +#include <asm/ucc_fast.h> + +#define uccf_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define uccf_dbg(format, arg...) \ + uccf_printk(KERN_DEBUG , format , ## arg) +#define uccf_err(format, arg...) \ + uccf_printk(KERN_ERR , format , ## arg) +#define uccf_info(format, arg...) \ + uccf_printk(KERN_INFO , format , ## arg) +#define uccf_warn(format, arg...) \ + uccf_printk(KERN_WARNING , format , ## arg) + +#ifdef UCCF_VERBOSE_DEBUG +#define uccf_vdbg uccf_dbg +#else +#define uccf_vdbg(fmt, args...) do { } while (0) +#endif /* UCCF_VERBOSE_DEBUG */ + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf) +{ + uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num); + uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs); + + uccf_info("gumr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + uccf_info("upsmr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + uccf_info("utodr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + uccf_info("udsr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + uccf_info("ucce : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + uccf_info("uccm : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + uccf_info("uccs : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); + uccf_info("urfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + uccf_info("urfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + uccf_info("urfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + uccf_info("urfset: addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfset, + in_be16(&uccf->uf_regs->urfset)); + uccf_info("utfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + uccf_info("utfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + uccf_info("utfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + uccf_info("utftt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + uccf_info("utpt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + uccf_info("urtry : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + uccf_info("guemr : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); +} + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num) +{ + switch (uccf_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} + +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} + +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} + +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) +{ + struct ucc_fast_private *uccf; + struct ucc_fast *uf_regs; + u32 gumr = 0; + int ret; + + uccf_vdbg("%s: IN", __FUNCTION__); + + if (!uf_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + uccf_err("ucc_fast_init: Illagal UCC number!"); + return -EINVAL; + } + + /* Check that 'max_rx_buf_length' is properly aligned (4). */ + if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { + uccf_err("ucc_fast_init: max_rx_buf_length not aligned."); + return -EINVAL; + } + + /* Validate Virtual Fifo register values */ + if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs too small."); + return -EINVAL; + } + + if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs not aligned."); + return -EINVAL; + } + + if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfet not aligned."); + return -EINVAL; + } + + if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfset not aligned."); + return -EINVAL; + } + + if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfs not aligned."); + return -EINVAL; + } + + if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfet not aligned."); + return -EINVAL; + } + + if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utftt not aligned."); + return -EINVAL; + } + + uccf = (struct ucc_fast_private *) + kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + if (!uccf) { + uccf_err + ("ucc_fast_init: No memory for UCC slow data structure!"); + return -ENOMEM; + } + memset(uccf, 0, sizeof(struct ucc_fast_private)); + + /* Fill fast UCC structure */ + uccf->uf_info = uf_info; + /* Set the PHY base address */ + uccf->uf_regs = + (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast)); + if (uccf->uf_regs == NULL) { + uccf_err + ("ucc_fast_init: No memory map for UCC slow controller!"); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + uccf->stopped_tx = 0; + uccf->stopped_rx = 0; + uf_regs = uccf->uf_regs; + uccf->p_ucce = (u32 *) & (uf_regs->ucce); + uccf->p_uccm = (u32 *) & (uf_regs->uccm); +#ifdef STATISTICS + uccf->tx_frames = 0; + uccf->rx_frames = 0; + uccf->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Init Guemr register */ + if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { + uccf_err("ucc_fast_init: Could not init the guemr register."); + ucc_fast_free(uccf); + return ret; + } + + /* Set UCC to fast type */ + if ((ret = ucc_set_type(uf_info->ucc_num, + (struct ucc_common *) (uf_regs), + UCC_SPEED_TYPE_FAST))) { + uccf_err("ucc_fast_init: Could not set type to fast."); + ucc_fast_free(uccf); + return ret; + } + + uccf->mrblr = uf_info->max_rx_buf_length; + + /* Set GUMR */ + /* For more details see the hardware spec. */ + /* gumr starts as zero. */ + if (uf_info->tci) + gumr |= UCC_FAST_GUMR_TCI; + gumr |= uf_info->ttx_trx; + if (uf_info->cdp) + gumr |= UCC_FAST_GUMR_CDP; + if (uf_info->ctsp) + gumr |= UCC_FAST_GUMR_CTSP; + if (uf_info->cds) + gumr |= UCC_FAST_GUMR_CDS; + if (uf_info->ctss) + gumr |= UCC_FAST_GUMR_CTSS; + if (uf_info->txsy) + gumr |= UCC_FAST_GUMR_TXSY; + if (uf_info->rsyn) + gumr |= UCC_FAST_GUMR_RSYN; + gumr |= uf_info->synl; + if (uf_info->rtsm) + gumr |= UCC_FAST_GUMR_RTSM; + gumr |= uf_info->renc; + if (uf_info->revd) + gumr |= UCC_FAST_GUMR_REVD; + gumr |= uf_info->tenc; + gumr |= uf_info->tcrc; + gumr |= uf_info->mode; + out_be32(&uf_regs->gumr, gumr); + + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "struct ucc_fastx_virtual_fifo_base_offset."); + uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->urfs + + (u32) + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "ucc_fast_rx_virtual_fifo_base_offset."); + uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, uf_info->urfs); + out_be16(&uf_regs->urfet, uf_info->urfet); + out_be16(&uf_regs->urfset, uf_info->urfset); + out_be16(&uf_regs->utfs, uf_info->utfs); + out_be16(&uf_regs->utfet, uf_info->utfet); + out_be16(&uf_regs->utftt, uf_info->utftt); + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!uf_info->tsa) { + /* Rx clock routing */ + if (uf_info->rx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'RxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + /* Tx clock routing */ + if (uf_info->tx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'TxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + } + + /* Set interrupt mask register at UCC level. */ + out_be32(&uf_regs->uccm, uf_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened + * Writing '1' clears + */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} + +void ucc_fast_free(struct ucc_fast_private * uccf) +{ + if (!uccf) + return; + + if (uccf->ucc_fast_tx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); + + if (uccf->ucc_fast_rx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + + kfree(uccf); +} diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c new file mode 100644 index 0000000000000..1fb88ef7cf064 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -0,0 +1,404 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * QE UCC Slow API Set - UCC Slow specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/interrupt.h> + +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/immap_qe.h> +#include <asm/qe.h> + +#include <asm/ucc.h> +#include <asm/ucc_slow.h> + +#define uccs_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define uccs_dbg(format, arg...) \ + uccs_printk(KERN_DEBUG , format , ## arg) +#define uccs_err(format, arg...) \ + uccs_printk(KERN_ERR , format , ## arg) +#define uccs_info(format, arg...) \ + uccs_printk(KERN_INFO , format , ## arg) +#define uccs_warn(format, arg...) \ + uccs_printk(KERN_WARNING , format , ## arg) + +#ifdef UCCS_VERBOSE_DEBUG +#define uccs_vdbg uccs_dbg +#else +#define uccs_vdbg(fmt, args...) do { } while (0) +#endif /* UCCS_VERBOSE_DEBUG */ + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num) +{ + switch (uccs_num) { + case 0: return QE_CR_SUBBLOCK_UCCSLOW1; + case 1: return QE_CR_SUBBLOCK_UCCSLOW2; + case 2: return QE_CR_SUBBLOCK_UCCSLOW3; + case 3: return QE_CR_SUBBLOCK_UCCSLOW4; + case 4: return QE_CR_SUBBLOCK_UCCSLOW5; + case 5: return QE_CR_SUBBLOCK_UCCSLOW6; + case 6: return QE_CR_SUBBLOCK_UCCSLOW7; + case 7: return QE_CR_SUBBLOCK_UCCSLOW8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs) +{ + out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD); +} + +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, + QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_restart_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l |= UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr_l |= UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 1; + } + out_be32(&us_regs->gumr_l, gumr_l); +} + +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 0; + } + out_be32(&us_regs->gumr_l, gumr_l); +} + +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) +{ + u32 i; + struct ucc_slow *us_regs; + u32 gumr; + u8 function_code = 0; + u8 *bd; + struct ucc_slow_private *uccs; + u32 id; + u32 command; + int ret; + + uccs_vdbg("%s: IN", __FUNCTION__); + + if (!us_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { + uccs_err("ucc_slow_init: Illagal UCC number!"); + return -EINVAL; + } + + /* + * Set mrblr + * Check that 'max_rx_buf_length' is properly aligned (4), unless + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * case when QE accepts 32 bits at a time. + */ + if ((!us_info->rfw) && + (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { + uccs_err("max_rx_buf_length not aligned."); + return -EINVAL; + } + + uccs = (struct ucc_slow_private *) + kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); + if (!uccs) { + uccs_err + ("ucc_slow_init: No memory for UCC slow data structure!"); + return -ENOMEM; + } + memset(uccs, 0, sizeof(struct ucc_slow_private)); + + /* Fill slow UCC structure */ + uccs->us_info = us_info; + uccs->saved_uccm = 0; + uccs->p_rx_frame = 0; + uccs->us_regs = us_info->us_regs; + us_regs = uccs->us_regs; + uccs->p_ucce = (u16 *) & (us_regs->ucce); + uccs->p_uccm = (u16 *) & (us_regs->uccm); +#ifdef STATISTICS + uccs->rx_frames = 0; + uccs->tx_frames = 0; + uccs->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Get PRAM base */ + uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, + ALIGNMENT_OF_UCC_SLOW_PRAM); + if (IS_MURAM_ERR(uccs->us_pram_offset)) { + uccs_err + ("ucc_slow_init: Can not allocate MURAM memory " + "for Slow UCC."); + ucc_slow_free(uccs); + return -ENOMEM; + } + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, + (u32) uccs->us_pram_offset); + + uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); + + /* Init Guemr register */ + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + uccs_err("ucc_slow_init: Could not init the guemr register."); + ucc_slow_free(uccs); + return ret; + } + + /* Set UCC to slow type */ + if ((ret = ucc_set_type(us_info->ucc_num, + (struct ucc_common *) (us_info->us_regs), + UCC_SPEED_TYPE_SLOW))) { + uccs_err("ucc_slow_init: Could not init the guemr register."); + ucc_slow_free(uccs); + return ret; + } + + out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length); + + INIT_LIST_HEAD(&uccs->confQ); + + /* Allocate BDs. */ + uccs->rx_base_offset = + qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_MURAM_ERR(uccs->rx_base_offset)) { + uccs_err("ucc_slow_init: No memory for Rx BD's."); + uccs->rx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + uccs->tx_base_offset = + qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_MURAM_ERR(uccs->tx_base_offset)) { + uccs_err("ucc_slow_init: No memory for Tx BD's."); + uccs->tx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + /* Init Tx bds */ + bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); + for (i = 0; i < us_info->tx_bd_ring_len; i++) { + /* clear bd buffer */ + out_be32(&(((struct qe_bd *)bd)->buf), 0); + /* set bd status and length */ + out_be32((u32*)bd, 0); + bd += sizeof(struct qe_bd); + } + bd -= sizeof(struct qe_bd); + /* set bd status and length */ + out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */ + + /* Init Rx bds */ + bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); + for (i = 0; i < us_info->rx_bd_ring_len; i++) { + /* set bd status and length */ + out_be32((u32*)bd, 0); + /* clear bd buffer */ + out_be32(&(((struct qe_bd *)bd)->buf), 0); + bd += sizeof(struct qe_bd); + } + bd -= sizeof(struct qe_bd); + /* set bd status and length */ + out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */ + + /* Set GUMR (For more details see the hardware spec.). */ + /* gumr_h */ + gumr = 0; + gumr |= us_info->tcrc; + if (us_info->cdp) + gumr |= UCC_SLOW_GUMR_H_CDP; + if (us_info->ctsp) + gumr |= UCC_SLOW_GUMR_H_CTSP; + if (us_info->cds) + gumr |= UCC_SLOW_GUMR_H_CDS; + if (us_info->ctss) + gumr |= UCC_SLOW_GUMR_H_CTSS; + if (us_info->tfl) + gumr |= UCC_SLOW_GUMR_H_TFL; + if (us_info->rfw) + gumr |= UCC_SLOW_GUMR_H_RFW; + if (us_info->txsy) + gumr |= UCC_SLOW_GUMR_H_TXSY; + if (us_info->rtsm) + gumr |= UCC_SLOW_GUMR_H_RTSM; + out_be32(&us_regs->gumr_h, gumr); + + /* gumr_l */ + gumr = 0; + if (us_info->tci) + gumr |= UCC_SLOW_GUMR_L_TCI; + if (us_info->rinv) + gumr |= UCC_SLOW_GUMR_L_RINV; + if (us_info->tinv) + gumr |= UCC_SLOW_GUMR_L_TINV; + if (us_info->tend) + gumr |= UCC_SLOW_GUMR_L_TEND; + gumr |= us_info->tdcr; + gumr |= us_info->rdcr; + gumr |= us_info->tenc; + gumr |= us_info->renc; + gumr |= us_info->diag; + gumr |= us_info->mode; + out_be32(&us_regs->gumr_l, gumr); + + /* Function code registers */ + /* function_code has initial value 0 */ + + /* if the data is in cachable memory, the 'global' */ + /* in the function code should be set. */ + function_code |= us_info->data_mem_part; + function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */ + uccs->us_pram->tfcr = function_code; + uccs->us_pram->rfcr = function_code; + + /* rbase, tbase are offsets from MURAM base */ + out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); + out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!us_info->tsa) { + /* Rx clock routing */ + if (ucc_set_qe_mux_rxtx + (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { + uccs_err + ("ucc_slow_init: Illegal value for parameter" + " 'RxClock'."); + ucc_slow_free(uccs); + return -EINVAL; + } + /* Tx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, + us_info->tx_clock, COMM_DIR_TX)) { + uccs_err + ("ucc_slow_init: Illegal value for parameter " + "'TxClock'."); + ucc_slow_free(uccs); + return -EINVAL; + } + } + + /* + * INTERRUPTS + */ + /* Set interrupt mask register at UCC level. */ + out_be16(&us_regs->uccm, us_info->uccm_mask); + + /* First, clear anything pending at UCC level, */ + /* otherwise, old garbage may come through */ + /* as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be16(&us_regs->ucce, 0xffff); + + /* Issue QE Init command */ + if (us_info->init_tx && us_info->init_rx) + command = QE_INIT_TX_RX; + else if (us_info->init_tx) + command = QE_INIT_TX; + else + command = QE_INIT_RX; /* We know at least one is TRUE */ + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); + + *uccs_ret = uccs; + return 0; +} + +void ucc_slow_free(struct ucc_slow_private * uccs) +{ + if (!uccs) + return; + + if (uccs->rx_base_offset) + qe_muram_free(uccs->rx_base_offset); + + if (uccs->tx_base_offset) + qe_muram_free(uccs->tx_base_offset); + + if (uccs->us_pram) { + qe_muram_free(uccs->us_pram_offset); + uccs->us_pram = NULL; + } + + kfree(uccs); +} diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 8adad1444a51f..708236f347461 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2,6 +2,8 @@ * Routines providing a simple monitor for use on the PowerMac. * * Copyright (C) 1996-2005 Paul Mackerras. + * Copyright (C) 2001 PPC64 Team, IBM Corp + * Copyrignt (C) 2006 Michael Ellerman, IBM Corp * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -503,7 +505,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) mtmsr(msr); /* restore interrupt enable */ - return cmd != 'X'; + return cmd != 'X' && cmd != EOF; } int xmon(struct pt_regs *excp) @@ -2597,3 +2599,34 @@ static int __init setup_xmon_sysrq(void) } __initcall(setup_xmon_sysrq); #endif /* CONFIG_MAGIC_SYSRQ */ + +int __initdata xmon_early, xmon_off; + +static int __init early_parse_xmon(char *p) +{ + if (!p || strncmp(p, "early", 5) == 0) { + /* just "xmon" is equivalent to "xmon=early" */ + xmon_init(1); + xmon_early = 1; + } else if (strncmp(p, "on", 2) == 0) + xmon_init(1); + else if (strncmp(p, "off", 3) == 0) + xmon_off = 1; + else if (strncmp(p, "nobt", 4) == 0) + xmon_no_auto_backtrace = 1; + else + return 1; + + return 0; +} +early_param("xmon", early_parse_xmon); + +void __init xmon_setup(void) +{ +#ifdef CONFIG_XMON_DEFAULT + if (!xmon_off) + xmon_init(1); +#endif + if (xmon_early) + debugger(NULL); +} |