1 files changed, 353 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
new file mode 100644
index 0000000000000..2bae632d3ad78
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+	QE_SNUM_STATE_USED,
+	QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+	u8 num;
+	enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap *qe_immr = NULL;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+	struct device_node *qe;
+
+	if (qebase != -1)
+		return qebase;
+
+	qe = of_find_node_by_type(NULL, "qe");
+	if (qe) {
+		unsigned int size;
+		const void *prop = get_property(qe, "reg", &size);
+		qebase = of_translate_address(qe, prop);
+		of_node_put(qe);
+	};
+
+	return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+	if (qe_immr == NULL)
+		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+	qe_snums_init();
+
+	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+	/* Reclaim the MURAM memory for our use. */
+	qe_muram_init();
+
+	if (qe_sdma_init())
+		panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+	unsigned long flags;
+	u8 mcn_shift = 0, dev_shift = 0;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	if (cmd == QE_RESET) {
+		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+	} else {
+		if (cmd == QE_ASSIGN_PAGE) {
+			/* Here device is the SNUM, not sub-block */
+			dev_shift = QE_CR_SNUM_SHIFT;
+		} else if (cmd == QE_ASSIGN_RISC) {
+			/* Here device is the SNUM, and mcnProtocol is
+			 * e_QeCmdRiscAssignment value */
+			dev_shift = QE_CR_SNUM_SHIFT;
+			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+		} else {
+			if (device == QE_CR_SUBBLOCK_USB)
+				mcn_shift = QE_CR_MCN_USB_SHIFT;
+			else
+				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+		}
+
+		out_be32(&qe_immr->cp.cecdr,
+			 immrbar_virt_to_phys((void *)cmd_input));
+		out_be32(&qe_immr->cp.cecr,
+			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+			  mcn_protocol << mcn_shift));
+	}
+
+	/* wait for the QE_CR_FLG to clear */
+	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
+		cpu_relax();
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+	struct device_node *qe;
+	if (brg_clk)
+		return brg_clk;
+
+	qe = of_find_node_by_type(NULL, "qe");
+	if (qe) {
+		unsigned int size;
+		const u32 *prop = get_property(qe, "brg-frequency", &size);
+		brg_clk = *prop;
+		of_node_put(qe);
+	};
+	return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(u32 brg, u32 rate)
+{
+	volatile u32 *bp;
+	u32 divisor, tempval;
+	int div16 = 0;
+
+	bp = &qe_immr->brg.brgc1;
+	bp += brg;
+
+	divisor = (get_brg_clk() / rate);
+	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+		div16 = 1;
+		divisor /= 16;
+	}
+
+	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+	if (div16)
+		tempval |= QE_BRGC_DIV16;
+
+	out_be32(bp, tempval);
+}
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+	int i;
+	static const u8 snum_init[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9,
+	};
+
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		snums[i].num = snum_init[i];
+		snums[i].state = QE_SNUM_STATE_FREE;
+	}
+}
+
+int qe_get_snum(void)
+{
+	unsigned long flags;
+	int snum = -EBUSY;
+	int i;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		if (snums[i].state == QE_SNUM_STATE_FREE) {
+			snums[i].state = QE_SNUM_STATE_USED;
+			snum = snums[i].num;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+	int i;
+
+	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+		if (snums[i].num == snum) {
+			snums[i].state = QE_SNUM_STATE_FREE;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+	struct sdma *sdma = &qe_immr->sdma;
+	u32 sdma_buf_offset;
+
+	if (!sdma)
+		return -ENODEV;
+
+	/* allocate 2 internal temporary buffers (512 bytes size each) for
+	 * the SDMA */
+	sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+	if (IS_MURAM_ERR(sdma_buf_offset))
+		return -ENOMEM;
+
+	out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+					QE_SDMR_CEN_SHIFT)));
+
+	return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+	struct device_node *np;
+	u32 address;
+	u64 size;
+	unsigned int flags;
+
+	/* initialize the info header */
+	rh_init(&qe_muram_info, 1,
+		sizeof(qe_boot_muram_rh_block) /
+		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+	/* Attach the usable muram area */
+	/* XXX: This is a subset of the available muram. It
+	 * varies with the processor and the microcode patches activated.
+	 */
+	if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+		address = *of_get_address(np, 0, &size, &flags);
+		of_node_put(np);
+		rh_attach_region(&qe_muram_info,
+			(void *)address, (int)size);
+	}
+}
+
+/* This function returns an index into the MURAM area.
+ */
+u32 qe_muram_alloc(u32 size, u32 align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(u32 offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	ret = rh_free(&qe_muram_info, (void *)offset);
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+u32 qe_muram_alloc_fixed(u32 offset, u32 size)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+	rh_dump(&qe_muram_info);
+}
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(u32 offset)
+{
+	return (void *)&qe_immr->muram[offset];
+}
+EXPORT_SYMBOL(qe_muram_addr);