diff options
| -rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 22 |
1 files changed, 19 insertions, 3 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index c4552f868157c4..c639e3a293024f 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -5009,10 +5009,18 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp, } /* Power up the port */ -static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { /* MAC Cause register should be cleared */ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); + + if (phy_mode != PHY_INTERFACE_MODE_QSGMII && + phy_mode != PHY_INTERFACE_MODE_SGMII && + !phy_interface_mode_is_8023z(phy_mode) && + !phy_interface_mode_is_rgmii(phy_mode)) + return -EINVAL; + + return 0; } /* Device initialization routine */ @@ -5198,7 +5206,11 @@ static int mvneta_probe(struct platform_device *pdev) if (err < 0) goto err_netdev; - mvneta_port_power_up(pp, phy_mode); + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(&pdev->dev, "can't power up port\n"); + return err; + } /* Armada3700 network controller does not support per-cpu * operation, so only single NAPI should be initialized. @@ -5352,7 +5364,11 @@ static int mvneta_resume(struct device *device) } } mvneta_defaults_set(pp); - mvneta_port_power_up(pp, pp->phy_interface); + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(device, "can't power up port\n"); + return err; + } netif_device_attach(dev); |