From: Marcello Maggioni Problem: Some drives (NEC 3500 , TDK 1616N , Mad-dog MD-16XDVD9, RICOH MP5163DA , Memorex DVD9 drive and IO-DATA's too for sure) , if a CD/DVD is inserted into the tray when the system is booted and if before the OS bootup the BIOS checked for the presence of a bootable CD/DVD into the drive , during the IDE probe phase the drive may result busy and remain so for the next 25/30 seconds . This cause the drive to be skipped during the booting phase and not begin usable until the next reboot (if the reboot goes well and the drive doesn't timeout again ). Solution: Rising the timeout time from 10 seconds to 35 seconds (during these 35 seconds every drive should wake up for sure according to the tests I've done). Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Cc: Jens Axboe Signed-off-by: Andrew Morton --- drivers/ide/ide-probe.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff -puN drivers/ide/ide-probe.c~timeout-at-boottime-with-nec3500a-and-others-when-inserted-a-cd-in-it drivers/ide/ide-probe.c --- 25/drivers/ide/ide-probe.c~timeout-at-boottime-with-nec3500a-and-others-when-inserted-a-cd-in-it Fri Apr 29 16:33:08 2005 +++ 25-akpm/drivers/ide/ide-probe.c Fri Apr 29 16:33:08 2005 @@ -696,13 +696,13 @@ static int wait_hwif_ready(ide_hwif_t *h SELECT_DRIVE(&hwif->drives[0]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); mdelay(2); - rc = ide_wait_not_busy(hwif, 10000); + rc = ide_wait_not_busy(hwif, 35000); if (rc) return rc; SELECT_DRIVE(&hwif->drives[1]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); mdelay(2); - rc = ide_wait_not_busy(hwif, 10000); + rc = ide_wait_not_busy(hwif, 35000); /* Exit function with master reselected (let's be sane) */ SELECT_DRIVE(&hwif->drives[0]); _