[libata sata_mv] add 6042 support, fix 60xx/50xx EDMA configuration

1 files changed, 200 insertions, 12 deletions

diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d9a554ca45c766..b55dd839ddbd32 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.5"
+#define DRV_VERSION	"0.6"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -228,7 +228,9 @@ enum {
 	MV_HP_ERRATA_50XXB2	= (1 << 2),
 	MV_HP_ERRATA_60X1B2	= (1 << 3),
 	MV_HP_ERRATA_60X1C0	= (1 << 4),
-	MV_HP_50XX		= (1 << 5),
+	MV_HP_ERRATA_XX42A0	= (1 << 5),
+	MV_HP_50XX		= (1 << 6),
+	MV_HP_GEN_IIE		= (1 << 7),
 
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),
@@ -237,6 +239,9 @@ enum {
 
 #define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
 #define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
+#define IS_GEN_I(hpriv) IS_50XX(hpriv)
+#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
 	/* Our DMA boundary is determined by an ePRD being unable to handle
@@ -255,6 +260,8 @@ enum chip_type {
 	chip_5080,
 	chip_604x,
 	chip_608x,
+	chip_6042,
+	chip_7042,
 };
 
 /* Command ReQuest Block: 32B */
@@ -265,6 +272,14 @@ struct mv_crqb {
 	u16			ata_cmd[11];
 };
 
+struct mv_crqb_iie {
+	u32			addr;
+	u32			addr_hi;
+	u32			flags;
+	u32			len;
+	u32			ata_cmd[4];
+};
+
 /* Command ResPonse Block: 8B */
 struct mv_crpb {
 	u16			id;
@@ -328,6 +343,7 @@ static void mv_host_stop(struct ata_host_set *host_set);
 static int mv_port_start(struct ata_port *ap);
 static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
 static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 				struct pt_regs *regs);
@@ -430,6 +446,33 @@ static const struct ata_port_operations mv6_ops = {
 	.host_stop		= mv_host_stop,
 };
 
+static const struct ata_port_operations mv_iie_ops = {
+	.port_disable		= ata_port_disable,
+
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.check_status		= ata_check_status,
+	.exec_command		= ata_exec_command,
+	.dev_select		= ata_std_dev_select,
+
+	.phy_reset		= mv_phy_reset,
+
+	.qc_prep		= mv_qc_prep_iie,
+	.qc_issue		= mv_qc_issue,
+
+	.eng_timeout		= mv_eng_timeout,
+
+	.irq_handler		= mv_interrupt,
+	.irq_clear		= mv_irq_clear,
+
+	.scr_read		= mv_scr_read,
+	.scr_write		= mv_scr_write,
+
+	.port_start		= mv_port_start,
+	.port_stop		= mv_port_stop,
+	.host_stop		= mv_host_stop,
+};
+
 static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
 		.sht		= &mv_sht,
@@ -467,6 +510,21 @@ static const struct ata_port_info mv_port_info[] = {
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv6_ops,
 	},
+	{  /* chip_6042 */
+		.sht		= &mv_sht,
+		.host_flags	= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.udma_mask	= 0x7f,	/* udma0-6 */
+		.port_ops	= &mv_iie_ops,
+	},
+	{  /* chip_7042 */
+		.sht		= &mv_sht,
+		.host_flags	= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				   MV_FLAG_DUAL_HC),
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.udma_mask	= 0x7f,	/* udma0-6 */
+		.port_ops	= &mv_iie_ops,
+	},
 };
 
 static const struct pci_device_id mv_pci_tbl[] = {
@@ -477,6 +535,7 @@ static const struct pci_device_id mv_pci_tbl[] = {
 
 	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
 	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042},
 	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
 	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
 
@@ -767,6 +826,33 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev)
 	dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
 }
 
+static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+{
+	u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+
+	/* set up non-NCQ EDMA configuration */
+	cfg &= ~0x1f;		/* clear queue depth */
+	cfg &= ~EDMA_CFG_NCQ;	/* clear NCQ mode */
+	cfg &= ~(1 << 9);	/* disable equeue */
+
+	if (IS_GEN_I(hpriv))
+		cfg |= (1 << 8);	/* enab config burst size mask */
+
+	else if (IS_GEN_II(hpriv))
+		cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+
+	else if (IS_GEN_IIE(hpriv)) {
+		cfg |= (1 << 23);	/* dis RX PM port mask */
+		cfg &= ~(1 << 16);	/* dis FIS-based switching (for now) */
+		cfg &= ~(1 << 19);	/* dis 128-entry queue (for now?) */
+		cfg |= (1 << 18);	/* enab early completion */
+		cfg |= (1 << 17);	/* enab host q cache */
+		cfg |= (1 << 22);	/* enab cutthrough */
+	}
+
+	writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+}
+
 /**
  *      mv_port_start - Port specific init/start routine.
  *      @ap: ATA channel to manipulate
@@ -780,6 +866,7 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev)
 static int mv_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
+	struct mv_host_priv *hpriv = ap->host_set->private_data;
 	struct mv_port_priv *pp;
 	void __iomem *port_mmio = mv_ap_base(ap);
 	void *mem;
@@ -823,17 +910,26 @@ static int mv_port_start(struct ata_port *ap)
 	pp->sg_tbl = mem;
 	pp->sg_tbl_dma = mem_dma;
 
-	writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
-		 EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+	mv_edma_cfg(hpriv, port_mmio);
 
 	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
 	writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
-	writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-	writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+		writelfl(pp->crqb_dma & 0xffffffff,
+			 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+	else
+		writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
 
 	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+		writelfl(pp->crpb_dma & 0xffffffff,
+			 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+	else
+		writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
 	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
@@ -954,9 +1050,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	struct ata_taskfile *tf;
 	u16 flags = 0;
 
- 	if (ATA_PROT_DMA != qc->tf.protocol) {
+ 	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
-	}
 
 	/* the req producer index should be the same as we remember it */
 	assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
@@ -965,9 +1060,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 
 	/* Fill in command request block
 	 */
-	if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
-	}
 	assert(MV_MAX_Q_DEPTH > qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
@@ -1022,9 +1116,76 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
 	mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1);	/* last */
 
-	if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+	mv_fill_sg(qc);
+}
+
+/**
+ *      mv_qc_prep_iie - Host specific command preparation.
+ *      @qc: queued command to prepare
+ *
+ *      This routine simply redirects to the general purpose routine
+ *      if command is not DMA.  Else, it handles prep of the CRQB
+ *      (command request block), does some sanity checking, and calls
+ *      the SG load routine.
+ *
+ *      LOCKING:
+ *      Inherited from caller.
+ */
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct mv_port_priv *pp = ap->private_data;
+	struct mv_crqb_iie *crqb;
+	struct ata_taskfile *tf;
+	u32 flags = 0;
+
+ 	if (ATA_PROT_DMA != qc->tf.protocol)
+		return;
+
+	/* the req producer index should be the same as we remember it */
+	assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+		 EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+	       pp->req_producer);
+
+	/* Fill in Gen IIE command request block
+	 */
+	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+		flags |= CRQB_FLAG_READ;
+
+	assert(MV_MAX_Q_DEPTH > qc->tag);
+	flags |= qc->tag << CRQB_TAG_SHIFT;
+
+	crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+	crqb->flags = cpu_to_le32(flags);
+
+	tf = &qc->tf;
+	crqb->ata_cmd[0] = cpu_to_le32(
+			(tf->command << 16) |
+			(tf->feature << 24)
+		);
+	crqb->ata_cmd[1] = cpu_to_le32(
+			(tf->lbal << 0) |
+			(tf->lbam << 8) |
+			(tf->lbah << 16) |
+			(tf->device << 24)
+		);
+	crqb->ata_cmd[2] = cpu_to_le32(
+			(tf->hob_lbal << 0) |
+			(tf->hob_lbam << 8) |
+			(tf->hob_lbah << 16) |
+			(tf->hob_feature << 24)
+		);
+	crqb->ata_cmd[3] = cpu_to_le32(
+			(tf->nsect << 0) |
+			(tf->hob_nsect << 8)
+		);
+
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
 		return;
-	}
 	mv_fill_sg(qc);
 }
 
@@ -1674,6 +1835,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
 	m2 |= hpriv->signal[port].pre;
 	m2 &= ~(1 << 16);
 
+	/* according to mvSata 3.6.1, some IIE values are fixed */
+	if (IS_GEN_IIE(hpriv)) {
+		m2 &= ~0xC30FF01F;
+		m2 |= 0x0000900F;
+	}
+
 	writel(m2, port_mmio + PHY_MODE2);
 }
 
@@ -1978,6 +2145,27 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
 		}
 		break;
 
+	case chip_7042:
+	case chip_6042:
+		hpriv->ops = &mv6xxx_ops;
+
+		hp_flags |= MV_HP_GEN_IIE;
+
+		switch (rev_id) {
+		case 0x0:
+			hp_flags |= MV_HP_ERRATA_XX42A0;
+			break;
+		case 0x1:
+			hp_flags |= MV_HP_ERRATA_60X1C0;
+			break;
+		default:
+			dev_printk(KERN_WARNING, &pdev->dev,
+			   "Applying 60X1C0 workarounds to unknown rev\n");
+			hp_flags |= MV_HP_ERRATA_60X1C0;
+			break;
+		}
+		break;
+
 	default:
 		printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
 		return 1;