aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBryan O'Sullivan <bos@pathscale.com>2006-09-28 09:00:00 -0700
committerRoland Dreier <rolandd@cisco.com>2006-09-28 11:16:27 -0700
commit2c9446a1d63f1ca570e92f89422595732efedf44 (patch)
tree9b401358de12f9f88e79ac471c5950b61aba45a3
parent9929b0fb0f35f54371e9364bab809bcd753f9d3a (diff)
downloadlinux-2c9446a1d63f1ca570e92f89422595732efedf44.tar.gz
IB/ipath: Support revision 2 InfiniPath PCIE devices
This also entailed a little GPIO-interrupt general cleanup. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-rw-r--r--drivers/infiniband/hw/ipath/ipath_common.h2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c116
-rw-r--r--drivers/infiniband/hw/ipath/ipath_intr.c88
-rw-r--r--drivers/infiniband/hw/ipath/ipath_kernel.h18
-rw-r--r--drivers/infiniband/hw/ipath/ipath_verbs.c28
5 files changed, 215 insertions, 37 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 46b7b20d8a9172..382956d2ea4bb7 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -186,6 +186,8 @@ typedef enum _ipath_ureg {
#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
#define IPATH_RUNTIME_RCVHDR_COPY 0x8
#define IPATH_RUNTIME_MASTER 0x10
+#define IPATH_RUNTIME_PBC_REWRITE 0x20
+#define IPATH_RUNTIME_LOOSE_DMA_ALIGN 0x40
/*
* This structure is returned by ipath_userinit() immediately after
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index d86516d23df618..d64b87bf1f97ce 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -294,6 +294,13 @@ static const struct ipath_cregs ipath_pe_cregs = {
#define IPATH_GPIO_SCL (1ULL << \
(_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+/*
+ * Rev2 silicon allows suppressing check for ArmLaunch errors.
+ * this can speed up short packet sends on systems that do
+ * not guaranteee write-order.
+ */
+#define INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR (1ULL<<63)
+
/**
* ipath_pe_handle_hwerrors - display hardware errors.
* @dd: the infinipath device
@@ -571,9 +578,12 @@ static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
if (!dd->ipath_boardrev) // no PLL for Emulator
val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- /* workaround bug 9460 in internal interface bus parity checking */
- val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM;
-
+ if (dd->ipath_minrev < 2) {
+ /* workaround bug 9460 in internal interface bus parity
+ * checking. Fixed (HW bug 9490) in Rev2.
+ */
+ val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM;
+ }
dd->ipath_hwerrmask = val;
}
@@ -583,8 +593,8 @@ static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
*/
static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
{
- u64 val, tmp, config1;
- int ret = 0, change = 0;
+ u64 val, tmp, config1, prev_val;
+ int ret = 0;
ipath_dbg("Trying to bringup serdes\n");
@@ -641,6 +651,7 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ prev_val = val;
if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) &
INFINIPATH_XGXS_MDIOADDR_MASK) != 3) {
val &=
@@ -648,11 +659,9 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
INFINIPATH_XGXS_MDIOADDR_SHIFT);
/* MDIO address 3 */
val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT;
- change = 1;
}
if (val & INFINIPATH_XGXS_RESET) {
val &= ~INFINIPATH_XGXS_RESET;
- change = 1;
}
if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
@@ -661,9 +670,19 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
INFINIPATH_XGXS_RX_POL_SHIFT);
val |= dd->ipath_rx_pol_inv <<
INFINIPATH_XGXS_RX_POL_SHIFT;
- change = 1;
}
- if (change)
+ if (dd->ipath_minrev >= 2) {
+ /* Rev 2. can tolerate multiple writes to PBC, and
+ * allowing them can provide lower latency on some
+ * CPUs, but this feature is off by default, only
+ * turned on by setting D63 of XGXSconfig reg.
+ * May want to make this conditional more
+ * fine-grained in future. This is not exactly
+ * related to XGXS, but where the bit ended up.
+ */
+ val |= INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR;
+ }
+ if (val != prev_val)
ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
@@ -717,9 +736,25 @@ static void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
}
-/* this is not yet needed on this chip, so just return 0. */
static int ipath_pe_intconfig(struct ipath_devdata *dd)
{
+ u64 val;
+ u32 chiprev;
+
+ /*
+ * If the chip supports added error indication via GPIO pins,
+ * enable interrupts on those bits so the interrupt routine
+ * can count the events. Also set flag so interrupt routine
+ * can know they are expected.
+ */
+ chiprev = dd->ipath_revision >> INFINIPATH_R_CHIPREVMINOR_SHIFT;
+ if ((chiprev & INFINIPATH_R_CHIPREVMINOR_MASK) > 1) {
+ /* Rev2+ reports extra errors via internal GPIO pins */
+ dd->ipath_flags |= IPATH_GPIO_ERRINTRS;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_mask);
+ val |= IPATH_GPIO_ERRINTR_MASK;
+ ipath_write_kreg( dd, dd->ipath_kregs->kr_gpio_mask, val);
+ }
return 0;
}
@@ -1082,6 +1117,45 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
mmiowb();
spin_unlock_irqrestore(&dd->ipath_tid_lock, flags);
}
+/**
+ * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
+ * @dd: the infinipath device
+ * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidtype: 0 for eager, 1 for expected
+ * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
+ *
+ * This exists as a separate routine to allow for selection of the
+ * appropriate "flavor". The static calls in cleanup just use the
+ * revision-agnostic form, as they are not performance critical.
+ */
+static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr,
+ u32 type, unsigned long pa)
+{
+ u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
+
+ if (pa != dd->ipath_tidinvalid) {
+ if (pa & ((1U << 11) - 1)) {
+ dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
+ "not 4KB aligned!\n", pa);
+ return;
+ }
+ pa >>= 11;
+ /* paranoia check */
+ if (pa & (7<<29))
+ ipath_dev_err(dd,
+ "BUG: Physical page address 0x%lx "
+ "has bits set in 31-29\n", pa);
+
+ if (type == 0)
+ pa |= dd->ipath_tidtemplate;
+ else /* for now, always full 4KB page */
+ pa |= 2 << 29;
+ }
+ if (dd->ipath_kregbase)
+ writel(pa, tidp32);
+ mmiowb();
+}
+
/**
* ipath_pe_clear_tid - clear all TID entries for a port, expected and eager
@@ -1203,7 +1277,7 @@ int __attribute__((weak)) ipath_unordered_wc(void)
/**
* ipath_init_pe_get_base_info - set chip-specific flags for user code
- * @dd: the infinipath device
+ * @pd: the infinipath port
* @kbase: ipath_base_info pointer
*
* We set the PCIE flag because the lower bandwidth on PCIe vs
@@ -1212,6 +1286,7 @@ int __attribute__((weak)) ipath_unordered_wc(void)
static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
{
struct ipath_base_info *kinfo = kbase;
+ struct ipath_devdata *dd;
if (ipath_unordered_wc()) {
kinfo->spi_runtime_flags |= IPATH_RUNTIME_FORCE_WC_ORDER;
@@ -1220,8 +1295,20 @@ static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
else
ipath_cdbg(PROC, "Not Intel processor, WC ordered\n");
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE;
+ if (pd == NULL)
+ goto done;
+
+ dd = pd->port_dd;
+
+ if (dd != NULL && dd->ipath_minrev >= 2) {
+ ipath_cdbg(PROC, "IBA6120 Rev2, allow multiple PBC write\n");
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_PBC_REWRITE;
+ ipath_cdbg(PROC, "IBA6120 Rev2, allow loose DMA alignment\n");
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_LOOSE_DMA_ALIGN;
+ }
+done:
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE;
return 0;
}
@@ -1244,7 +1331,10 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
dd->ipath_f_quiet_serdes = ipath_pe_quiet_serdes;
dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes;
dd->ipath_f_clear_tids = ipath_pe_clear_tids;
- dd->ipath_f_put_tid = ipath_pe_put_tid;
+ if (dd->ipath_minrev >= 2)
+ dd->ipath_f_put_tid = ipath_pe_put_tid_2;
+ else
+ dd->ipath_f_put_tid = ipath_pe_put_tid;
dd->ipath_f_cleanup = ipath_setup_pe_cleanup;
dd->ipath_f_setextled = ipath_setup_pe_setextled;
dd->ipath_f_get_base_info = ipath_pe_get_base_info;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 49bf7bb15b04b2..5762b87d12eca0 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -808,7 +808,7 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
if (oldhead != curtail) {
if (dd->ipath_flags & IPATH_GPIO_INTR) {
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- (u64) (1 << 2));
+ (u64) (1 << IPATH_GPIO_PORT0_BIT));
istat = port0rbits | INFINIPATH_I_GPIO;
}
else
@@ -867,26 +867,80 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
if (istat & INFINIPATH_I_GPIO) {
/*
- * Packets are available in the port 0 rcv queue.
- * Eventually this needs to be generalized to check
- * IPATH_GPIO_INTR, and the specific GPIO bit, if
- * GPIO interrupts are used for anything else.
+ * GPIO interrupts fall in two broad classes:
+ * GPIO_2 indicates (on some HT4xx boards) that a packet
+ * has arrived for Port 0. Checking for this
+ * is controlled by flag IPATH_GPIO_INTR.
+ * GPIO_3..5 on IBA6120 Rev2 chips indicate errors
+ * that we need to count. Checking for this
+ * is controlled by flag IPATH_GPIO_ERRINTRS.
*/
- if (unlikely(!(dd->ipath_flags & IPATH_GPIO_INTR))) {
- u32 gpiostatus;
- gpiostatus = ipath_read_kreg32(
- dd, dd->ipath_kregs->kr_gpio_status);
- ipath_dbg("Unexpected GPIO interrupt bits %x\n",
- gpiostatus);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- gpiostatus);
+ u32 gpiostatus;
+ u32 to_clear = 0;
+
+ gpiostatus = ipath_read_kreg32(
+ dd, dd->ipath_kregs->kr_gpio_status);
+ /* First the error-counter case.
+ */
+ if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
+ (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
+ /* want to clear the bits we see asserted. */
+ to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
+
+ /*
+ * Count appropriately, clear bits out of our copy,
+ * as they have been "handled".
+ */
+ if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
+ ipath_dbg("FlowCtl on UnsupVL\n");
+ dd->ipath_rxfc_unsupvl_errs++;
+ }
+ if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
+ ipath_dbg("Overrun Threshold exceeded\n");
+ dd->ipath_overrun_thresh_errs++;
+ }
+ if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
+ ipath_dbg("Local Link Integrity error\n");
+ dd->ipath_lli_errs++;
+ }
+ gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
}
- else {
- /* Clear GPIO status bit 2 */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- (u64) (1 << 2));
+ /* Now the Port0 Receive case */
+ if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
+ (dd->ipath_flags & IPATH_GPIO_INTR)) {
+ /*
+ * GPIO status bit 2 is set, and we expected it.
+ * clear it and indicate in p0bits.
+ * This probably only happens if a Port0 pkt
+ * arrives at _just_ the wrong time, and we
+ * handle that by seting chk0rcv;
+ */
+ to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
+ gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
chk0rcv = 1;
}
+ if (unlikely(gpiostatus)) {
+ /*
+ * Some unexpected bits remain. If they could have
+ * caused the interrupt, complain and clear.
+ * MEA: this is almost certainly non-ideal.
+ * we should look into auto-disable of unexpected
+ * GPIO interrupts, possibly on a "three strikes"
+ * basis.
+ */
+ u32 mask;
+ mask = ipath_read_kreg32(
+ dd, dd->ipath_kregs->kr_gpio_mask);
+ if (mask & gpiostatus) {
+ ipath_dbg("Unexpected GPIO IRQ bits %x\n",
+ gpiostatus & mask);
+ to_clear |= (gpiostatus & mask);
+ }
+ }
+ if (to_clear) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+ (u64) to_clear);
+ }
}
chk0rcv |= istat & port0rbits;
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 0cabd4f16234a6..e9cd95f3c2e1b8 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -524,6 +524,15 @@ struct ipath_devdata {
u32 ipath_lli_counter;
/* local link integrity errors */
u32 ipath_lli_errors;
+ /*
+ * Above counts only cases where _successive_ LocalLinkIntegrity
+ * errors were seen in the receive headers of kern-packets.
+ * Below are the three (monotonically increasing) counters
+ * maintained via GPIO interrupts on iba6120-rev2.
+ */
+ u32 ipath_rxfc_unsupvl_errs;
+ u32 ipath_overrun_thresh_errs;
+ u32 ipath_lli_errs;
};
/* Private data for file operations */
@@ -636,6 +645,15 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
/* can miss port0 rx interrupts */
#define IPATH_POLL_RX_INTR 0x40000
#define IPATH_DISABLED 0x80000 /* administratively disabled */
+ /* Use GPIO interrupts for new counters */
+#define IPATH_GPIO_ERRINTRS 0x100000
+
+/* Bits in GPIO for the added interrupts */
+#define IPATH_GPIO_PORT0_BIT 2
+#define IPATH_GPIO_RXUVL_BIT 3
+#define IPATH_GPIO_OVRUN_BIT 4
+#define IPATH_GPIO_LLI_BIT 5
+#define IPATH_GPIO_ERRINTR_MASK 0x38
/* portdata flag bit offsets */
/* waiting for a packet to arrive */
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index a4bf870c5e31ba..56c01938f714f8 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -898,7 +898,8 @@ int ipath_get_counters(struct ipath_devdata *dd,
ipath_snap_cntr(dd, dd->ipath_cregs->cr_erricrccnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_errvcrccnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_errlpcrccnt) +
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_badformatcnt);
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_badformatcnt) +
+ dd->ipath_rxfc_unsupvl_errs;
cntrs->port_rcv_remphys_errors =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_rcvebpcnt);
cntrs->port_xmit_discards =
@@ -911,8 +912,10 @@ int ipath_get_counters(struct ipath_devdata *dd,
ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
cntrs->port_rcv_packets =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
- cntrs->local_link_integrity_errors = dd->ipath_lli_errors;
- cntrs->excessive_buffer_overrun_errors = 0; /* XXX */
+ cntrs->local_link_integrity_errors =
+ (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
+ dd->ipath_lli_errs : dd->ipath_lli_errors;
+ cntrs->excessive_buffer_overrun_errors = dd->ipath_overrun_thresh_errs;
ret = 0;
@@ -1380,11 +1383,13 @@ static int enable_timer(struct ipath_devdata *dd)
* processing.
*/
if (dd->ipath_flags & IPATH_GPIO_INTR) {
+ u64 val;
ipath_write_kreg(dd, dd->ipath_kregs->kr_debugportselect,
0x2074076542310ULL);
/* Enable GPIO bit 2 interrupt */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- (u64) (1 << 2));
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_mask);
+ val |= (u64) (1 << IPATH_GPIO_PORT0_BIT);
+ ipath_write_kreg( dd, dd->ipath_kregs->kr_gpio_mask, val);
}
init_timer(&dd->verbs_timer);
@@ -1399,8 +1404,17 @@ static int enable_timer(struct ipath_devdata *dd)
static int disable_timer(struct ipath_devdata *dd)
{
/* Disable GPIO bit 2 interrupt */
- if (dd->ipath_flags & IPATH_GPIO_INTR)
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask, 0);
+ if (dd->ipath_flags & IPATH_GPIO_INTR) {
+ u64 val;
+ /* Disable GPIO bit 2 interrupt */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_mask);
+ val &= ~((u64) (1 << IPATH_GPIO_PORT0_BIT));
+ ipath_write_kreg( dd, dd->ipath_kregs->kr_gpio_mask, val);
+ /*
+ * We might want to undo changes to debugportselect,
+ * but how?
+ */
+ }
del_timer_sync(&dd->verbs_timer);