20 August 2004 20 August 2004 This documentation is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA For more details see the file COPYING in the source distribution of Linux. 2003-2004 David Brownell David Brownell

dbrownell@users.sourceforge.net

This document presents a Linux-USB "Gadget" kernel mode API, for use within peripherals and other USB devices that embed Linux. It provides an overview of the API structure, and shows how that fits into a system development project. This is the first such API released on Linux to address a number of important problems, including: Supports USB 2.0, for high speed devices which can stream data at several dozen megabytes per second. Handles devices with dozens of endpoints just as well as ones with just two fixed-function ones. Gadget drivers can be written so they're easy to port to new hardware. Flexible enough to expose more complex USB device capabilities such as multiple configurations, multiple interfaces, composite devices, and alternate interface settings. USB "On-The-Go" (OTG) support, in conjunction with updates to the Linux-USB host side. Sharing data structures and API models with the Linux-USB host side API. This helps the OTG support, and looks forward to more-symmetric frameworks (where the same I/O model is used by both host and device side drivers). Minimalist, so it's easier to support new device controller hardware. I/O processing doesn't imply large demands for memory or CPU resources. Most Linux developers will not be able to use this API, since they have USB "host" hardware in a PC, workstation, or server. Linux users with embedded systems are more likely to have USB peripheral hardware. To distinguish drivers running inside such hardware from the more familiar Linux "USB device drivers", which are host side proxies for the real USB devices, a different term is used: the drivers inside the peripherals are "USB gadget drivers". In USB protocol interactions, the device driver is the master (or "client driver") and the gadget driver is the slave (or "function driver"). The gadget API resembles the host side Linux-USB API in that both use queues of request objects to package I/O buffers, and those requests may be submitted or canceled. They share common definitions for the standard USB Chapter 9 messages, structures, and constants. Also, both APIs bind and unbind drivers to devices. The APIs differ in detail, since the host side's current URB framework exposes a number of implementation details and assumptions that are inappropriate for a gadget API. While the model for control transfers and configuration management is necessarily different (one side is a hardware-neutral master, the other is a hardware-aware slave), the endpoint I/0 API used here should also be usable for an overhead-reduced host side API. A system running inside a USB peripheral normally has at least three layers inside the kernel to handle USB protocol processing, and may have additional layers in user space code. The "gadget" API is used by the middle layer to interact with the lowest level (which directly handles hardware). In Linux, from the bottom up, these layers are: USB Controller Driver This is the lowest software level. It is the only layer that talks to hardware, through registers, fifos, dma, irqs, and the like. The <linux/usb/gadget.h> API abstracts the peripheral controller endpoint hardware. That hardware is exposed through endpoint objects, which accept streams of IN/OUT buffers, and through callbacks that interact with gadget drivers. Since normal USB devices only have one upstream port, they only have one of these drivers. The controller driver can support any number of different gadget drivers, but only one of them can be used at a time. Examples of such controller hardware include the PCI-based NetChip 2280 USB 2.0 high speed controller, the SA-11x0 or PXA-25x UDC (found within many PDAs), and a variety of other products. Gadget Driver The lower boundary of this driver implements hardware-neutral USB functions, using calls to the controller driver. Because such hardware varies widely in capabilities and restrictions, and is used in embedded environments where space is at a premium, the gadget driver is often configured at compile time to work with endpoints supported by one particular controller. Gadget drivers may be portable to several different controllers, using conditional compilation. (Recent kernels substantially simplify the work involved in supporting new hardware, by autoconfiguring endpoints automatically for many bulk-oriented drivers.) Gadget driver responsibilities include: handling setup requests (ep0 protocol responses) possibly including class-specific functionality returning configuration and string descriptors (re)setting configurations and interface altsettings, including enabling and configuring endpoints handling life cycle events, such as managing bindings to hardware, USB suspend/resume, remote wakeup, and disconnection from the USB host. managing IN and OUT transfers on all currently enabled endpoints Such drivers may be modules of proprietary code, although that approach is discouraged in the Linux community. Upper Level Most gadget drivers have an upper boundary that connects to some Linux driver or framework in Linux. Through that boundary flows the data which the gadget driver produces and/or consumes through protocol transfers over USB. Examples include: user mode code, using generic (gadgetfs) or application specific files in /dev networking subsystem (for network gadgets, like the CDC Ethernet Model gadget driver) data capture drivers, perhaps video4Linux or a scanner driver; or test and measurement hardware. input subsystem (for HID gadgets) sound subsystem (for audio gadgets) file system (for PTP gadgets) block i/o subsystem (for usb-storage gadgets) ... and more Additional Layers Other layers may exist. These could include kernel layers, such as network protocol stacks, as well as user mode applications building on standard POSIX system call APIs such as open(), close(), read() and write(). On newer systems, POSIX Async I/O calls may be an option. Such user mode code will not necessarily be subject to the GNU General Public License (GPL). OTG-capable systems will also need to include a standard Linux-USB host side stack, with usbcore, one or more Host Controller Drivers (HCDs), USB Device Drivers to support the OTG "Targeted Peripheral List", and so forth. There will also be an OTG Controller Driver, which is visible to gadget and device driver developers only indirectly. That helps the host and device side USB controllers implement the two new OTG protocols (HNP and SRP). Roles switch (host to peripheral, or vice versa) using HNP during USB suspend processing, and SRP can be viewed as a more battery-friendly kind of device wakeup protocol. Over time, reusable utilities are evolving to help make some gadget driver tasks simpler. For example, building configuration descriptors from vectors of descriptors for the configurations interfaces and endpoints is now automated, and many drivers now use autoconfiguration to choose hardware endpoints and initialize their descriptors. A potential example of particular interest is code implementing standard USB-IF protocols for HID, networking, storage, or audio classes. Some developers are interested in KDB or KGDB hooks, to let target hardware be remotely debugged. Most such USB protocol code doesn't need to be hardware-specific, any more than network protocols like X11, HTTP, or NFS are. Such gadget-side interface drivers should eventually be combined, to implement composite devices. Gadget drivers declare themselves through a struct usb_gadget_driver, which is responsible for most parts of enumeration for a struct usb_gadget. The response to a set_configuration usually involves enabling one or more of the struct usb_ep objects exposed by the gadget, and submitting one or more struct usb_request buffers to transfer data. Understand those four data types, and their operations, and you will understand how this API works. This documentation was prepared using the standard Linux kernel docproc tool, which turns text and in-code comments into SGML DocBook and then into usable formats such as HTML or PDF. Other than the "Chapter 9" data types, most of the significant data types and functions are described here. However, docproc does not understand all the C constructs that are used, so some relevant information is likely omitted from what you are reading. One example of such information is endpoint autoconfiguration. You'll have to read the header file, and use example source code (such as that for "Gadget Zero"), to fully understand the API. The part of the API implementing some basic driver capabilities is specific to the version of the Linux kernel that's in use. The 2.6 kernel includes a driver model framework that has no analogue on earlier kernels; so those parts of the gadget API are not fully portable. (They are implemented on 2.4 kernels, but in a different way.) The driver model state is another part of this API that is ignored by the kerneldoc tools. The core API does not expose every possible hardware feature, only the most widely available ones. There are significant hardware features, such as device-to-device DMA (without temporary storage in a memory buffer) that would be added using hardware-specific APIs. This API allows drivers to use conditional compilation to handle endpoint capabilities of different hardware, but doesn't require that. Hardware tends to have arbitrary restrictions, relating to transfer types, addressing, packet sizes, buffering, and availability. As a rule, such differences only matter for "endpoint zero" logic that handles device configuration and management. The API supports limited run-time detection of capabilities, through naming conventions for endpoints. Many drivers will be able to at least partially autoconfigure themselves. In particular, driver init sections will often have endpoint autoconfiguration logic that scans the hardware's list of endpoints to find ones matching the driver requirements (relying on those conventions), to eliminate some of the most common reasons for conditional compilation. Like the Linux-USB host side API, this API exposes the "chunky" nature of USB messages: I/O requests are in terms of one or more "packets", and packet boundaries are visible to drivers. Compared to RS-232 serial protocols, USB resembles synchronous protocols like HDLC (N bytes per frame, multipoint addressing, host as the primary station and devices as secondary stations) more than asynchronous ones (tty style: 8 data bits per frame, no parity, one stop bit). So for example the controller drivers won't buffer two single byte writes into a single two-byte USB IN packet, although gadget drivers may do so when they implement protocols where packet boundaries (and "short packets") are not significant. Gadget drivers make endpoint I/O requests to hardware without needing to know many details of the hardware, but driver setup/configuration code needs to handle some differences. Use the API like this: Register a driver for the particular device side usb controller hardware, such as the net2280 on PCI (USB 2.0), sa11x0 or pxa25x as found in Linux PDAs, and so on. At this point the device is logically in the USB ch9 initial state ("attached"), drawing no power and not usable (since it does not yet support enumeration). Any host should not see the device, since it's not activated the data line pullup used by the host to detect a device, even if VBUS power is available. Register a gadget driver that implements some higher level device function. That will then bind() to a usb_gadget, which activates the data line pullup sometime after detecting VBUS. The hardware driver can now start enumerating. The steps it handles are to accept USB power and set_address requests. Other steps are handled by the gadget driver. If the gadget driver module is unloaded before the host starts to enumerate, steps before step 7 are skipped. The gadget driver's setup() call returns usb descriptors, based both on what the bus interface hardware provides and on the functionality being implemented. That can involve alternate settings or configurations, unless the hardware prevents such operation. For OTG devices, each configuration descriptor includes an OTG descriptor. The gadget driver handles the last step of enumeration, when the USB host issues a set_configuration call. It enables all endpoints used in that configuration, with all interfaces in their default settings. That involves using a list of the hardware's endpoints, enabling each endpoint according to its descriptor. It may also involve using usb_gadget_vbus_draw to let more power be drawn from VBUS, as allowed by that configuration. For OTG devices, setting a configuration may also involve reporting HNP capabilities through a user interface. Do real work and perform data transfers, possibly involving changes to interface settings or switching to new configurations, until the device is disconnect()ed from the host. Queue any number of transfer requests to each endpoint. It may be suspended and resumed several times before being disconnected. On disconnect, the drivers go back to step 3 (above). When the gadget driver module is being unloaded, the driver unbind() callback is issued. That lets the controller driver be unloaded. Drivers will normally be arranged so that just loading the gadget driver module (or statically linking it into a Linux kernel) allows the peripheral device to be enumerated, but some drivers will defer enumeration until some higher level component (like a user mode daemon) enables it. Note that at this lowest level there are no policies about how ep0 configuration logic is implemented, except that it should obey USB specifications. Such issues are in the domain of gadget drivers, including knowing about implementation constraints imposed by some USB controllers or understanding that composite devices might happen to be built by integrating reusable components. Note that the lifecycle above can be slightly different for OTG devices. Other than providing an additional OTG descriptor in each configuration, only the HNP-related differences are particularly visible to driver code. They involve reporting requirements during the SET_CONFIGURATION request, and the option to invoke HNP during some suspend callbacks. Also, SRP changes the semantics of usb_gadget_wakeup slightly. Gadget drivers rely on common USB structures and constants defined in the <linux/usb/ch9.h> header file, which is standard in Linux 2.6 kernels. These are the same types and constants used by host side drivers (and usbcore). Kernel Hackers Manual October 2009 struct usb_ctrlrequest 9 2.6.32-rc5 struct usb_ctrlrequest SETUP data for a USB device control request struct usb_ctrlrequest { __u8 bRequestType; __u8 bRequest; __le16 wValue; __le16 wIndex; __le16 wLength; }; bRequestType matches the USB bmRequestType field bRequest matches the USB bRequest field wValue matches the USB wValue field (le16 byte order) wIndex matches the USB wIndex field (le16 byte order) wLength matches the USB wLength field (le16 byte order) This structure is used to send control requests to a USB device. It matches the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the USB spec for a fuller description of the different fields, and what they are used for. Note that the driver for any interface can issue control requests. For most devices, interfaces don't coordinate with each other, so such requests may be made at any time. Kernel Hackers Manual October 2009 usb_endpoint_num 9 2.6.32-rc5 usb_endpoint_num get the endpoint's number int usb_endpoint_num const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns epd's number: 0 to 15. Kernel Hackers Manual October 2009 usb_endpoint_type 9 2.6.32-rc5 usb_endpoint_type get the endpoint's transfer type int usb_endpoint_type const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according to epd's transfer type. Kernel Hackers Manual October 2009 usb_endpoint_dir_in 9 2.6.32-rc5 usb_endpoint_dir_in check if the endpoint has IN direction int usb_endpoint_dir_in const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type IN, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_dir_out 9 2.6.32-rc5 usb_endpoint_dir_out check if the endpoint has OUT direction int usb_endpoint_dir_out const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type OUT, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_xfer_bulk 9 2.6.32-rc5 usb_endpoint_xfer_bulk check if the endpoint has bulk transfer type int usb_endpoint_xfer_bulk const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type bulk, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_xfer_control 9 2.6.32-rc5 usb_endpoint_xfer_control check if the endpoint has control transfer type int usb_endpoint_xfer_control const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type control, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_xfer_int 9 2.6.32-rc5 usb_endpoint_xfer_int check if the endpoint has interrupt transfer type int usb_endpoint_xfer_int const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type interrupt, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_xfer_isoc 9 2.6.32-rc5 usb_endpoint_xfer_isoc check if the endpoint has isochronous transfer type int usb_endpoint_xfer_isoc const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint is of type isochronous, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_bulk_in 9 2.6.32-rc5 usb_endpoint_is_bulk_in check if the endpoint is bulk IN int usb_endpoint_is_bulk_in const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has bulk transfer type and IN direction, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_bulk_out 9 2.6.32-rc5 usb_endpoint_is_bulk_out check if the endpoint is bulk OUT int usb_endpoint_is_bulk_out const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has bulk transfer type and OUT direction, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_int_in 9 2.6.32-rc5 usb_endpoint_is_int_in check if the endpoint is interrupt IN int usb_endpoint_is_int_in const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has interrupt transfer type and IN direction, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_int_out 9 2.6.32-rc5 usb_endpoint_is_int_out check if the endpoint is interrupt OUT int usb_endpoint_is_int_out const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has interrupt transfer type and OUT direction, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_isoc_in 9 2.6.32-rc5 usb_endpoint_is_isoc_in check if the endpoint is isochronous IN int usb_endpoint_is_isoc_in const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has isochronous transfer type and IN direction, otherwise it returns false. Kernel Hackers Manual October 2009 usb_endpoint_is_isoc_out 9 2.6.32-rc5 usb_endpoint_is_isoc_out check if the endpoint is isochronous OUT int usb_endpoint_is_isoc_out const struct usb_endpoint_descriptor * epd epd endpoint to be checked Returns true if the endpoint has isochronous transfer type and OUT direction, otherwise it returns false. These are declared in <linux/usb/gadget.h>, and are used by gadget drivers to interact with USB peripheral controller drivers. Kernel Hackers Manual October 2009 struct usb_request 9 2.6.32-rc5 struct usb_request describes one i/o request struct usb_request { void * buf; unsigned length; dma_addr_t dma; unsigned no_interrupt:1; unsigned zero:1; unsigned short_not_ok:1; void (* complete) (struct usb_ep *ep,struct usb_request *req); void * context; struct list_head list; int status; unsigned actual; }; buf Buffer used for data. Always provide this; some controllers only use PIO, or don't use DMA for some endpoints. length Length of that data dma DMA address corresponding to 'buf'. If you don't set this field, and the usb controller needs one, it is responsible for mapping and unmapping the buffer. no_interrupt If true, hints that no completion irq is needed. Helpful sometimes with deep request queues that are handled directly by DMA controllers. zero If true, when writing data, makes the last packet be short by adding a zero length packet as needed; short_not_ok When reading data, makes short packets be treated as errors (queue stops advancing till cleanup). complete Function called when request completes, so this request and its buffer may be re-used. The function will always be called with interrupts disabled, and it must not sleep. Reads terminate with a short packet, or when the buffer fills, whichever comes first. When writes terminate, some data bytes will usually still be in flight (often in a hardware fifo). Errors (for reads or writes) stop the queue from advancing until the completion function returns, so that any transfers invalidated by the error may first be dequeued. context For use by the completion callback list For use by the gadget driver. status Reports completion code, zero or a negative errno. Normally, faults block the transfer queue from advancing until the completion callback returns. Code -ESHUTDOWN indicates completion caused by device disconnect, or when the driver disabled the endpoint. actual Reports bytes transferred to/from the buffer. For reads (OUT transfers) this may be less than the requested length. If the short_not_ok flag is set, short reads are treated as errors even when status otherwise indicates successful completion. Note that for writes (IN transfers) some data bytes may still reside in a device-side FIFO when the request is reported as complete. These are allocated/freed through the endpoint they're used with. The hardware's driver can add extra per-request data to the memory it returns, which often avoids separate memory allocations (potential failures), later when the request is queued. Request flags affect request handling, such as whether a zero length packet is written (the zero flag), whether a short read should be treated as an error (blocking request queue advance, the short_not_ok flag), or hinting that an interrupt is not required (the no_interrupt flag, for use with deep request queues). Bulk endpoints can use any size buffers, and can also be used for interrupt transfers. interrupt-only endpoints can be much less functional. this is analagous to 'struct urb' on the host side, except that it's thinner and promotes more pre-allocation. Kernel Hackers Manual October 2009 struct usb_ep 9 2.6.32-rc5 struct usb_ep device side representation of USB endpoint struct usb_ep { void * driver_data; const char * name; const struct usb_ep_ops * ops; struct list_head ep_list; unsigned maxpacket:16; }; driver_data for use by the gadget driver. all other fields are read-only to gadget drivers. name identifier for the endpoint, such as ep-a or ep9in-bulk ops Function pointers used to access hardware-specific operations. ep_list the gadget's ep_list holds all of its endpoints maxpacket The maximum packet size used on this endpoint. The initial value can sometimes be reduced (hardware allowing), according to the endpoint descriptor used to configure the endpoint. the bus controller driver lists all the general purpose endpoints in gadget->ep_list. the control endpoint (gadget->ep0) is not in that list, and is accessed only in response to a driver setup callback. Kernel Hackers Manual October 2009 usb_ep_enable 9 2.6.32-rc5 usb_ep_enable configure endpoint, making it usable int usb_ep_enable struct usb_ep * ep const struct usb_endpoint_descriptor * desc ep the endpoint being configured. may not be the endpoint named ep0. drivers discover endpoints through the ep_list of a usb_gadget. desc descriptor for desired behavior. caller guarantees this pointer remains valid until the endpoint is disabled; the data byte order is little-endian (usb-standard). when configurations are set, or when interface settings change, the driver will enable or disable the relevant endpoints. while it is enabled, an endpoint may be used for i/o until the driver receives a disconnect from the host or until the endpoint is disabled. the ep0 implementation (which calls this routine) must ensure that the hardware capabilities of each endpoint match the descriptor provided for it. for example, an endpoint named ep2in-bulk would be usable for interrupt transfers as well as bulk, but it likely couldn't be used for iso transfers or for endpoint 14. some endpoints are fully configurable, with more generic names like ep-a. (remember that for USB, in means towards the USB master.) returns zero, or a negative error code. Kernel Hackers Manual October 2009 usb_ep_disable 9 2.6.32-rc5 usb_ep_disable endpoint is no longer usable int usb_ep_disable struct usb_ep * ep ep the endpoint being unconfigured. may not be the endpoint named ep0. no other task may be using this endpoint when this is called. any pending and uncompleted requests will complete with status indicating disconnect (-ESHUTDOWN) before this call returns. gadget drivers must call usb_ep_enable again before queueing requests to the endpoint. returns zero, or a negative error code. Kernel Hackers Manual October 2009 usb_ep_alloc_request 9 2.6.32-rc5 usb_ep_alloc_request allocate a request object to use with this endpoint struct usb_request * usb_ep_alloc_request struct usb_ep * ep gfp_t gfp_flags ep the endpoint to be used with with the request gfp_flags GFP_* flags to use Request objects must be allocated with this call, since they normally need controller-specific setup and may even need endpoint-specific resources such as allocation of DMA descriptors. Requests may be submitted with usb_ep_queue, and receive a single completion callback. Free requests with usb_ep_free_request, when they are no longer needed. Returns the request, or null if one could not be allocated. Kernel Hackers Manual October 2009 usb_ep_free_request 9 2.6.32-rc5 usb_ep_free_request frees a request object void usb_ep_free_request struct usb_ep * ep struct usb_request * req ep the endpoint associated with the request req the request being freed Reverses the effect of usb_ep_alloc_request. Caller guarantees the request is not queued, and that it will no longer be requeued (or otherwise used). Kernel Hackers Manual October 2009 usb_ep_queue 9 2.6.32-rc5 usb_ep_queue queues (submits) an I/O request to an endpoint. int usb_ep_queue struct usb_ep * ep struct usb_request * req gfp_t gfp_flags ep the endpoint associated with the request req the request being submitted gfp_flags GFP_* flags to use in case the lower level driver couldn't pre-allocate all necessary memory with the request. This tells the device controller to perform the specified request through that endpoint (reading or writing a buffer). When the request completes, including being canceled by usb_ep_dequeue, the request's completion routine is called to return the request to the driver. Any endpoint (except control endpoints like ep0) may have more than one transfer request queued; they complete in FIFO order. Once a gadget driver submits a request, that request may not be examined or modified until it is given back to that driver through the completion callback. Each request is turned into one or more packets. The controller driver never merges adjacent requests into the same packet. OUT transfers will sometimes use data that's already buffered in the hardware. Drivers can rely on the fact that the first byte of the request's buffer always corresponds to the first byte of some USB packet, for both IN and OUT transfers. Bulk endpoints can queue any amount of data; the transfer is packetized automatically. The last packet will be short if the request doesn't fill it out completely. Zero length packets (ZLPs) should be avoided in portable protocols since not all usb hardware can successfully handle zero length packets. (ZLPs may be explicitly written, and may be implicitly written if the request 'zero' flag is set.) Bulk endpoints may also be used for interrupt transfers; but the reverse is not true, and some endpoints won't support every interrupt transfer. (Such as 768 byte packets.) Interrupt-only endpoints are less functional than bulk endpoints, for example by not supporting queueing or not handling buffers that are larger than the endpoint's maxpacket size. They may also treat data toggle differently. Control endpoints ... after getting a setup callback, the driver queues one response (even if it would be zero length). That enables the status ack, after transfering data as specified in the response. Setup functions may return negative error codes to generate protocol stalls. (Note that some USB device controllers disallow protocol stall responses in some cases.) When control responses are deferred (the response is written after the setup callback returns), then usb_ep_set_halt may be used on ep0 to trigger protocol stalls. Depending on the controller, it may not be possible to trigger a status-stage protocol stall when the data stage is over, that is, from within the response's completion routine. For periodic endpoints, like interrupt or isochronous ones, the usb host arranges to poll once per interval, and the gadget driver usually will have queued some data to transfer at that time. Returns zero, or a negative error code. Endpoints that are not enabled report errors; errors will also be reported when the usb peripheral is disconnected. Kernel Hackers Manual October 2009 usb_ep_dequeue 9 2.6.32-rc5 usb_ep_dequeue dequeues (cancels, unlinks) an I/O request from an endpoint int usb_ep_dequeue struct usb_ep * ep struct usb_request * req ep the endpoint associated with the request req the request being canceled if the request is still active on the endpoint, it is dequeued and its completion routine is called (with status -ECONNRESET); else a negative error code is returned. note that some hardware can't clear out write fifos (to unlink the request at the head of the queue) except as part of disconnecting from usb. such restrictions prevent drivers from supporting configuration changes, even to configuration zero (a chapter 9 requirement). Kernel Hackers Manual October 2009 usb_ep_set_halt 9 2.6.32-rc5 usb_ep_set_halt sets the endpoint halt feature. int usb_ep_set_halt struct usb_ep * ep ep the non-isochronous endpoint being stalled Use this to stall an endpoint, perhaps as an error report. Except for control endpoints, the endpoint stays halted (will not stream any data) until the host clears this feature; drivers may need to empty the endpoint's request queue first, to make sure no inappropriate transfers happen. Note that while an endpoint CLEAR_FEATURE will be invisible to the gadget driver, a SET_INTERFACE will not be. To reset endpoints for the current altsetting, see usb_ep_clear_halt. When switching altsettings, it's simplest to use usb_ep_enable or usb_ep_disable for the endpoints. Returns zero, or a negative error code. On success, this call sets underlying hardware state that blocks data transfers. Attempts to halt IN endpoints will fail (returning -EAGAIN) if any transfer requests are still queued, or if the controller hardware (usually a FIFO) still holds bytes that the host hasn't collected. Kernel Hackers Manual October 2009 usb_ep_clear_halt 9 2.6.32-rc5 usb_ep_clear_halt clears endpoint halt, and resets toggle int usb_ep_clear_halt struct usb_ep * ep ep the bulk or interrupt endpoint being reset Use this when responding to the standard usb set interface request, for endpoints that aren't reconfigured, after clearing any other state in the endpoint's i/o queue. Returns zero, or a negative error code. On success, this call clears the underlying hardware state reflecting endpoint halt and data toggle. Note that some hardware can't support this request (like pxa2xx_udc), and accordingly can't correctly implement interface altsettings. Kernel Hackers Manual October 2009 usb_ep_set_wedge 9 2.6.32-rc5 usb_ep_set_wedge sets the halt feature and ignores clear requests int usb_ep_set_wedge struct usb_ep * ep ep the endpoint being wedged Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) requests. If the gadget driver clears the halt status, it will automatically unwedge the endpoint. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_ep_fifo_status 9 2.6.32-rc5 usb_ep_fifo_status returns number of bytes in fifo, or error int usb_ep_fifo_status struct usb_ep * ep ep the endpoint whose fifo status is being checked. FIFO endpoints may have unclaimed data in them in certain cases, such as after aborted transfers. Hosts may not have collected all the IN data written by the gadget driver (and reported by a request completion). The gadget driver may not have collected all the data written OUT to it by the host. Drivers that need precise handling for fault reporting or recovery may need to use this call. This returns the number of such bytes in the fifo, or a negative errno if the endpoint doesn't use a FIFO or doesn't support such precise handling. Kernel Hackers Manual October 2009 usb_ep_fifo_flush 9 2.6.32-rc5 usb_ep_fifo_flush flushes contents of a fifo void usb_ep_fifo_flush struct usb_ep * ep ep the endpoint whose fifo is being flushed. This call may be used to flush the unclaimed data that may exist in an endpoint fifo after abnormal transaction terminations. The call must never be used except when endpoint is not being used for any protocol translation. Kernel Hackers Manual October 2009 struct usb_gadget 9 2.6.32-rc5 struct usb_gadget represents a usb slave device struct usb_gadget { const struct usb_gadget_ops * ops; struct usb_ep * ep0; struct list_head ep_list; enum usb_device_speed speed; unsigned is_dualspeed:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; unsigned a_hnp_support:1; unsigned a_alt_hnp_support:1; const char * name; struct device dev; }; ops Function pointers used to access hardware-specific operations. ep0 Endpoint zero, used when reading or writing responses to driver setup requests ep_list List of other endpoints supported by the device. speed Speed of current connection to USB host. is_dualspeed True if the controller supports both high and full speed operation. If it does, the gadget driver must also support both. is_otg True if the USB device port uses a Mini-AB jack, so that the gadget driver must provide a USB OTG descriptor. is_a_peripheral False unless is_otg, the A end of a USB cable is in the Mini-AB jack, and HNP has been used to switch roles so that the A device currently acts as A-Peripheral, not A-Host. b_hnp_enable OTG device feature flag, indicating that the A-Host enabled HNP support. a_hnp_support OTG device feature flag, indicating that the A-Host supports HNP at this port. a_alt_hnp_support OTG device feature flag, indicating that the A-Host only supports HNP on a different root port. name Identifies the controller hardware type. Used in diagnostics and sometimes configuration. dev Driver model state for this abstract device. Gadgets have a mostly-portable gadget driver implementing device functions, handling all usb configurations and interfaces. Gadget drivers talk to hardware-specific code indirectly, through ops vectors. That insulates the gadget driver from hardware details, and packages the hardware endpoints through generic i/o queues. The usb_gadget and usb_ep interfaces provide that insulation from the hardware. Except for the driver data, all fields in this structure are read-only to the gadget driver. That driver data is part of the driver model infrastructure in 2.6 (and later) kernels, and for earlier systems is grouped in a similar structure that's not known to the rest of the kernel. Values of the three OTG device feature flags are updated before the setup call corresponding to USB_REQ_SET_CONFIGURATION, and before driver suspend calls. They are valid only when is_otg, and when the device is acting as a B-Peripheral (so is_a_peripheral is false). Kernel Hackers Manual October 2009 gadget_is_dualspeed 9 2.6.32-rc5 gadget_is_dualspeed return true iff the hardware handles high speed int gadget_is_dualspeed struct usb_gadget * g g controller that might support both high and full speeds Kernel Hackers Manual October 2009 gadget_is_otg 9 2.6.32-rc5 gadget_is_otg return true iff the hardware is OTG-ready int gadget_is_otg struct usb_gadget * g g controller that might have a Mini-AB connector This is a runtime test, since kernels with a USB-OTG stack sometimes run on boards which only have a Mini-B (or Mini-A) connector. Kernel Hackers Manual October 2009 usb_gadget_frame_number 9 2.6.32-rc5 usb_gadget_frame_number returns the current frame number int usb_gadget_frame_number struct usb_gadget * gadget gadget controller that reports the frame number Returns the usb frame number, normally eleven bits from a SOF packet, or negative errno if this device doesn't support this capability. Kernel Hackers Manual October 2009 usb_gadget_wakeup 9 2.6.32-rc5 usb_gadget_wakeup tries to wake up the host connected to this gadget int usb_gadget_wakeup struct usb_gadget * gadget gadget controller used to wake up the host Returns zero on success, else negative error code if the hardware doesn't support such attempts, or its support has not been enabled by the usb host. Drivers must return device descriptors that report their ability to support this, or hosts won't enable it. This may also try to use SRP to wake the host and start enumeration, even if OTG isn't otherwise in use. OTG devices may also start remote wakeup even when hosts don't explicitly enable it. Kernel Hackers Manual October 2009 usb_gadget_set_selfpowered 9 2.6.32-rc5 usb_gadget_set_selfpowered sets the device selfpowered feature. int usb_gadget_set_selfpowered struct usb_gadget * gadget gadget the device being declared as self-powered this affects the device status reported by the hardware driver to reflect that it now has a local power supply. returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_clear_selfpowered 9 2.6.32-rc5 usb_gadget_clear_selfpowered clear the device selfpowered feature. int usb_gadget_clear_selfpowered struct usb_gadget * gadget gadget the device being declared as bus-powered this affects the device status reported by the hardware driver. some hardware may not support bus-powered operation, in which case this feature's value can never change. returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_vbus_connect 9 2.6.32-rc5 usb_gadget_vbus_connect Notify controller that VBUS is powered int usb_gadget_vbus_connect struct usb_gadget * gadget gadget The device which now has VBUS power. can sleep This call is used by a driver for an external transceiver (or GPIO) that detects a VBUS power session starting. Common responses include resuming the controller, activating the D+ (or D-) pullup to let the host detect that a USB device is attached, and starting to draw power (8mA or possibly more, especially after SET_CONFIGURATION). Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_vbus_draw 9 2.6.32-rc5 usb_gadget_vbus_draw constrain controller's VBUS power usage int usb_gadget_vbus_draw struct usb_gadget * gadget unsigned mA gadget The device whose VBUS usage is being described mA How much current to draw, in milliAmperes. This should be twice the value listed in the configuration descriptor bMaxPower field. This call is used by gadget drivers during SET_CONFIGURATION calls, reporting how much power the device may consume. For example, this could affect how quickly batteries are recharged. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_vbus_disconnect 9 2.6.32-rc5 usb_gadget_vbus_disconnect notify controller about VBUS session end int usb_gadget_vbus_disconnect struct usb_gadget * gadget gadget the device whose VBUS supply is being described can sleep This call is used by a driver for an external transceiver (or GPIO) that detects a VBUS power session ending. Common responses include reversing everything done in usb_gadget_vbus_connect. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_connect 9 2.6.32-rc5 usb_gadget_connect software-controlled connect to USB host int usb_gadget_connect struct usb_gadget * gadget gadget the peripheral being connected Enables the D+ (or potentially D-) pullup. The host will start enumerating this gadget when the pullup is active and a VBUS session is active (the link is powered). This pullup is always enabled unless usb_gadget_disconnect has been used to disable it. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_gadget_disconnect 9 2.6.32-rc5 usb_gadget_disconnect software-controlled disconnect from USB host int usb_gadget_disconnect struct usb_gadget * gadget gadget the peripheral being disconnected Disables the D+ (or potentially D-) pullup, which the host may see as a disconnect (when a VBUS session is active). Not all systems support software pullup controls. This routine may be used during the gadget driver bind call to prevent the peripheral from ever being visible to the USB host, unless later usb_gadget_connect is called. For example, user mode components may need to be activated before the system can talk to hosts. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 struct usb_gadget_driver 9 2.6.32-rc5 struct usb_gadget_driver driver for usb 'slave' devices struct usb_gadget_driver { char * function; enum usb_device_speed speed; int (* bind) (struct usb_gadget *); void (* unbind) (struct usb_gadget *); int (* setup) (struct usb_gadget *,const struct usb_ctrlrequest *); void (* disconnect) (struct usb_gadget *); void (* suspend) (struct usb_gadget *); void (* resume) (struct usb_gadget *); struct device_driver driver; }; function String describing the gadget's function speed Highest speed the driver handles. bind Invoked when the driver is bound to a gadget, usually after registering the driver. At that point, ep0 is fully initialized, and ep_list holds the currently-available endpoints. Called in a context that permits sleeping. unbind Invoked when the driver is unbound from a gadget, usually from rmmod (after a disconnect is reported). Called in a context that permits sleeping. setup Invoked for ep0 control requests that aren't handled by the hardware level driver. Most calls must be handled by the gadget driver, including descriptor and configuration management. The 16 bit members of the setup data are in USB byte order. Called in_interrupt; this may not sleep. Driver queues a response to ep0, or returns negative to stall. disconnect Invoked after all transfers have been stopped, when the host is disconnected. May be called in_interrupt; this may not sleep. Some devices can't detect disconnect, so this might not be called except as part of controller shutdown. suspend Invoked on USB suspend. May be called in_interrupt. resume Invoked on USB resume. May be called in_interrupt. driver Driver model state for this driver. Devices are disabled till a gadget driver successfully binds, which means the driver will handle setup requests needed to enumerate (and meet chapter 9 requirements) then do some useful work. If gadget->is_otg is true, the gadget driver must provide an OTG descriptor during enumeration, or else fail the bind call. In such cases, no USB traffic may flow until both bind returns without having called usb_gadget_disconnect, and the USB host stack has initialized. Drivers use hardware-specific knowledge to configure the usb hardware. endpoint addressing is only one of several hardware characteristics that are in descriptors the ep0 implementation returns from setup calls. Except for ep0 implementation, most driver code shouldn't need change to run on top of different usb controllers. It'll use endpoints set up by that ep0 implementation. The usb controller driver handles a few standard usb requests. Those include set_address, and feature flags for devices, interfaces, and endpoints (the get_status, set_feature, and clear_feature requests). Accordingly, the driver's setup callback must always implement all get_descriptor requests, returning at least a device descriptor and a configuration descriptor. Drivers must make sure the endpoint descriptors match any hardware constraints. Some hardware also constrains other descriptors. (The pxa250 allows only configurations 1, 2, or 3). The driver's setup callback must also implement set_configuration, and should also implement set_interface, get_configuration, and get_interface. Setting a configuration (or interface) is where endpoints should be activated or (config 0) shut down. (Note that only the default control endpoint is supported. Neither hosts nor devices generally support control traffic except to ep0.) Most devices will ignore USB suspend/resume operations, and so will not provide those callbacks. However, some may need to change modes when the host is not longer directing those activities. For example, local controls (buttons, dials, etc) may need to be re-enabled since the (remote) host can't do that any longer; or an error state might be cleared, to make the device behave identically whether or not power is maintained. Kernel Hackers Manual October 2009 usb_gadget_register_driver 9 2.6.32-rc5 usb_gadget_register_driver register a gadget driver int usb_gadget_register_driver struct usb_gadget_driver * driver driver the driver being registered can sleep Call this in your gadget driver's module initialization function, to tell the underlying usb controller driver about your driver. The driver's bind function will be called to bind it to a gadget before this registration call returns. It's expected that the bind functions will be in init sections. Kernel Hackers Manual October 2009 usb_gadget_unregister_driver 9 2.6.32-rc5 usb_gadget_unregister_driver unregister a gadget driver int usb_gadget_unregister_driver struct usb_gadget_driver * driver driver the driver being unregistered can sleep Call this in your gadget driver's module cleanup function, to tell the underlying usb controller that your driver is going away. If the controller is connected to a USB host, it will first disconnect. The driver is also requested to unbind and clean up any device state, before this procedure finally returns. It's expected that the unbind functions will in in exit sections, so may not be linked in some kernels. Kernel Hackers Manual October 2009 struct usb_string 9 2.6.32-rc5 struct usb_string wraps a C string and its USB id struct usb_string { u8 id; const char * s; }; id the (nonzero) ID for this string s the string, in UTF-8 encoding If you're using usb_gadget_get_string, use this to wrap a string together with its ID. Kernel Hackers Manual October 2009 struct usb_gadget_strings 9 2.6.32-rc5 struct usb_gadget_strings a set of USB strings in a given language struct usb_gadget_strings { u16 language; struct usb_string * strings; }; language identifies the strings' language (0x0409 for en-us) strings array of strings with their ids If you're using usb_gadget_get_string, use this to wrap all the strings for a given language. Kernel Hackers Manual October 2009 usb_free_descriptors 9 2.6.32-rc5 usb_free_descriptors free descriptors returned by usb_copy_descriptors void usb_free_descriptors struct usb_descriptor_header ** v v vector of descriptors The core API is sufficient for writing a USB Gadget Driver, but some optional utilities are provided to simplify common tasks. These utilities include endpoint autoconfiguration. Kernel Hackers Manual October 2009 usb_gadget_get_string 9 2.6.32-rc5 usb_gadget_get_string fill out a string descriptor int usb_gadget_get_string struct usb_gadget_strings * table int id u8 * buf table of c strings encoded using UTF-8 id string id, from low byte of wValue in get string descriptor buf at least 256 bytes Finds the UTF-8 string matching the ID, and converts it into a string descriptor in utf16-le. Returns length of descriptor (always even) or negative errno If your driver needs stings in multiple languages, you'll probably switch (wIndex) { ... } in your ep0 string descriptor logic, using this routine after choosing which set of UTF-8 strings to use. Note that US-ASCII is a strict subset of UTF-8; any string bytes with the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 characters (which are also widely used in C strings). Kernel Hackers Manual October 2009 usb_descriptor_fillbuf 9 2.6.32-rc5 usb_descriptor_fillbuf fill buffer with descriptors int usb_descriptor_fillbuf void * buf unsigned buflen const struct usb_descriptor_header ** src buf Buffer to be filled buflen Size of buf src Array of descriptor pointers, terminated by null pointer. Copies descriptors into the buffer, returning the length or a negative error code if they can't all be copied. Useful when assembling descriptors for an associated set of interfaces used as part of configuring a composite device; or in other cases where sets of descriptors need to be marshaled. Kernel Hackers Manual October 2009 usb_gadget_config_buf 9 2.6.32-rc5 usb_gadget_config_buf builts a complete configuration descriptor int usb_gadget_config_buf const struct usb_config_descriptor * config void * buf unsigned length const struct usb_descriptor_header ** desc config Header for the descriptor, including characteristics such as power requirements and number of interfaces. buf Buffer for the resulting configuration descriptor. length Length of buffer. If this is not big enough to hold the entire configuration descriptor, an error code will be returned. desc Null-terminated vector of pointers to the descriptors (interface, endpoint, etc) defining all functions in this device configuration. This copies descriptors into the response buffer, building a descriptor for that configuration. It returns the buffer length or a negative status code. The config.wTotalLength field is set to match the length of the result, but other descriptor fields (including power usage and interface count) must be set by the caller. Gadget drivers could use this when constructing a config descriptor in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. Kernel Hackers Manual October 2009 usb_copy_descriptors 9 2.6.32-rc5 usb_copy_descriptors copy a vector of USB descriptors struct usb_descriptor_header ** usb_copy_descriptors struct usb_descriptor_header ** src src null-terminated vector to copy initialization code, which may sleep This makes a copy of a vector of USB descriptors. Its primary use is to support usb_function objects which can have multiple copies, each needing different descriptors. Functions may have static tables of descriptors, which are used as templates and customized with identifiers (for interfaces, strings, endpoints, and more) as needed by a given function instance. Kernel Hackers Manual October 2009 usb_find_endpoint 9 2.6.32-rc5 usb_find_endpoint find a copy of an endpoint descriptor struct usb_endpoint_descriptor * usb_find_endpoint struct usb_descriptor_header ** src struct usb_descriptor_header ** copy struct usb_endpoint_descriptor * match src original vector of descriptors copy copy of src match endpoint descriptor found in src This returns the copy of the match descriptor made for copy. Its intended use is to help remembering the endpoint descriptor to use when enabling a given endpoint. The core API is sufficient for writing drivers for composite USB devices (with more than one function in a given configuration), and also multi-configuration devices (also more than one function, but not necessarily sharing a given configuration). There is however an optional framework which makes it easier to reuse and combine functions. Devices using this framework provide a struct usb_composite_driver, which in turn provides one or more struct usb_configuration instances. Each such configuration includes at least one struct usb_function, which packages a user visible role such as "network link" or "mass storage device". Management functions may also exist, such as "Device Firmware Upgrade". Kernel Hackers Manual October 2009 struct usb_function 9 2.6.32-rc5 struct usb_function describes one function of a configuration struct usb_function { const char * name; struct usb_gadget_strings ** strings; struct usb_descriptor_header ** descriptors; struct usb_descriptor_header ** hs_descriptors; struct usb_configuration * config; int (* bind) (struct usb_configuration *,struct usb_function *); void (* unbind) (struct usb_configuration *,struct usb_function *); int (* set_alt) (struct usb_function *,unsigned interface, unsigned alt); int (* get_alt) (struct usb_function *,unsigned interface); void (* disable) (struct usb_function *); int (* setup) (struct usb_function *,const struct usb_ctrlrequest *); void (* suspend) (struct usb_function *); void (* resume) (struct usb_function *); }; name For diagnostics, identifies the function. strings tables of strings, keyed by identifiers assigned during bind and by language IDs provided in control requests descriptors Table of full (or low) speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the function will not be available at full speed (or at low speed). hs_descriptors Table of high speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the function will not be available at high speed. config assigned when usb_add_function() is called; this is the configuration with which this function is associated. bind Before the gadget can register, all of its functions bind to the available resources including string and interface identifiers used in interface or class descriptors; endpoints; I/O buffers; and so on. unbind Reverses bind; called as a side effect of unregistering the driver which added this function. set_alt (REQUIRED) Reconfigures altsettings; function drivers may initialize usb_ep.driver data at this time (when it is used). Note that setting an interface to its current altsetting resets interface state, and that all interfaces have a disabled state. get_alt Returns the active altsetting. If this is not provided, then only altsetting zero is supported. disable (REQUIRED) Indicates the function should be disabled. Reasons include host resetting or reconfiguring the gadget, and disconnection. setup Used for interface-specific control requests. suspend Notifies functions when the host stops sending USB traffic. resume Notifies functions when the host restarts USB traffic. A single USB function uses one or more interfaces, and should in most cases support operation at both full and high speeds. Each function is associated by usb_add_function() with a one configuration; that function causes bind() to be called so resources can be allocated as part of setting up a gadget driver. Those resources include endpoints, which should be allocated using usb_ep_autoconfig(). To support dual speed operation, a function driver provides descriptors for both high and full speed operation. Except in rare cases that don't involve bulk endpoints, each speed needs different endpoint descriptors. Function drivers choose their own strategies for managing instance data. The simplest strategy just declares it "static', which means the function can only be activated once. If the function needs to be exposed in more than one configuration at a given speed, it needs to support multiple usb_function structures (one for each configuration). A more complex strategy might encapsulate a usb_function structure inside a driver-specific instance structure to allows multiple activations. An example of multiple activations might be a CDC ACM function that supports two or more distinct instances within the same configuration, providing several independent logical data links to a USB host. Kernel Hackers Manual October 2009 ep_choose 9 2.6.32-rc5 ep_choose select descriptor endpoint at current device speed struct usb_endpoint_descriptor * ep_choose struct usb_gadget * g struct usb_endpoint_descriptor * hs struct usb_endpoint_descriptor * fs g gadget, connected and running at some speed hs descriptor to use for high speed operation fs descriptor to use for full or low speed operation Kernel Hackers Manual October 2009 struct usb_configuration 9 2.6.32-rc5 struct usb_configuration represents one gadget configuration struct usb_configuration { const char * label; struct usb_gadget_strings ** strings; const struct usb_descriptor_header ** descriptors; int (* bind) (struct usb_configuration *); void (* unbind) (struct usb_configuration *); int (* setup) (struct usb_configuration *,const struct usb_ctrlrequest *); u8 bConfigurationValue; u8 iConfiguration; u8 bmAttributes; u8 bMaxPower; struct usb_composite_dev * cdev; }; label For diagnostics, describes the configuration. strings Tables of strings, keyed by identifiers assigned during bind() and by language IDs provided in control requests. descriptors Table of descriptors preceding all function descriptors. Examples include OTG and vendor-specific descriptors. bind Called from usb_add_config() to allocate resources unique to this configuration and to call usb_add_function() for each function used. unbind Reverses bind; called as a side effect of unregistering the driver which added this configuration. setup Used to delegate control requests that aren't handled by standard device infrastructure or directed at a specific interface. bConfigurationValue Copied into configuration descriptor. iConfiguration Copied into configuration descriptor. bmAttributes Copied into configuration descriptor. bMaxPower Copied into configuration descriptor. cdev assigned by usb_add_config() before calling bind(); this is the device associated with this configuration. Configurations are building blocks for gadget drivers structured around function drivers. Simple USB gadgets require only one function and one configuration, and handle dual-speed hardware by always providing the same functionality. Slightly more complex gadgets may have more than one single-function configuration at a given speed; or have configurations that only work at one speed. Composite devices are, by definition, ones with configurations which include more than one function. The lifecycle of a usb_configuration includes allocation, initialization of the fields described above, and calling usb_add_config() to set up internal data and bind it to a specific device. The configuration's bind() method is then used to initialize all the functions and then call usb_add_function() for them. Those functions would normally be independant of each other, but that's not mandatory. CDC WMC devices are an example where functions often depend on other functions, with some functions subsidiary to others. Such interdependency may be managed in any way, so long as all of the descriptors complete by the time the composite driver returns from its bind routine. Kernel Hackers Manual October 2009 struct usb_composite_driver 9 2.6.32-rc5 struct usb_composite_driver groups configurations into a gadget struct usb_composite_driver { const char * name; const struct usb_device_descriptor * dev; struct usb_gadget_strings ** strings; int (* bind) (struct usb_composite_dev *); int (* unbind) (struct usb_composite_dev *); void (* suspend) (struct usb_composite_dev *); void (* resume) (struct usb_composite_dev *); }; name For diagnostics, identifies the driver. dev Template descriptor for the device, including default device identifiers. strings tables of strings, keyed by identifiers assigned during bind and language IDs provided in control requests bind (REQUIRED) Used to allocate resources that are shared across the whole device, such as string IDs, and add its configurations using usb_add_config(). This may fail by returning a negative errno value; it should return zero on successful initialization. unbind Reverses bind(); called as a side effect of unregistering this driver. suspend Notifies when the host stops sending USB traffic, after function notifications resume Notifies configuration when the host restarts USB traffic, before function notifications Devices default to reporting self powered operation. Devices which rely on bus powered operation should report this in their bind() method. Before returning from bind, various fields in the template descriptor may be overridden. These include the idVendor/idProduct/bcdDevice values normally to bind the appropriate host side driver, and the three strings (iManufacturer, iProduct, iSerialNumber) normally used to provide user meaningful device identifiers. (The strings will not be defined unless they are defined in dev and strings.) The correct ep0 maxpacket size is also reported, as defined by the underlying controller driver. Kernel Hackers Manual October 2009 struct usb_composite_dev 9 2.6.32-rc5 struct usb_composite_dev represents one composite usb gadget struct usb_composite_dev { struct usb_gadget * gadget; struct usb_request * req; unsigned bufsiz; struct usb_configuration * config; }; gadget read-only, abstracts the gadget's usb peripheral controller req used for control responses; buffer is pre-allocated bufsiz size of buffer pre-allocated in req config the currently active configuration One of these devices is allocated and initialized before the associated device driver's bind is called. it appears that some WUSB devices will need to be built by combining a normal (wired) gadget with a wireless one. This revision of the gadget framework should probably try to make sure doing that won't hurt too much. (a) a second gadget here, discovery mechanism TBD, but likely needing separate register/unregister WUSB gadget calls; (b) updates to usb_gadget to include flags is it wireless, is it wired, plus (presumably in a wrapper structure) bandgroup and PHY info; (c) presumably a wireless_ep wrapping a usb_ep, and reporting wireless-specific parameters like maxburst and maxsequence; (d) configurations that are specific to wireless links; (e) function drivers that understand wireless configs and will support wireless for (additional) function instances; (f) a function to support association setup (like CBAF), not necessarily requiring a wireless adapter; (g) composite device setup that can create one or more wireless configs, including appropriate association setup support; (h) more, TBD. Kernel Hackers Manual October 2009 usb_add_function 9 2.6.32-rc5 usb_add_function add a function to a configuration int usb_add_function struct usb_configuration * config struct usb_function * function config the configuration function the function being added single threaded during gadget setup After initialization, each configuration must have one or more functions added to it. Adding a function involves calling its bind() method to allocate resources such as interface and string identifiers and endpoints. This function returns the value of the function's bind, which is zero for success else a negative errno value. Kernel Hackers Manual October 2009 usb_function_deactivate 9 2.6.32-rc5 usb_function_deactivate prevent function and gadget enumeration int usb_function_deactivate struct usb_function * function function the function that isn't yet ready to respond Blocks response of the gadget driver to host enumeration by preventing the data line pullup from being activated. This is normally called during bind() processing to change from the initial ready to respond state, or when a required resource becomes available. For example, drivers that serve as a passthrough to a userspace daemon can block enumeration unless that daemon (such as an OBEX, MTP, or print server) is ready to handle host requests. Not all systems support software control of their USB peripheral data pullups. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_function_activate 9 2.6.32-rc5 usb_function_activate allow function and gadget enumeration int usb_function_activate struct usb_function * function function function on which usb_function_activate was called Reverses effect of usb_function_deactivate. If no more functions are delaying their activation, the gadget driver will respond to host enumeration procedures. Returns zero on success, else negative errno. Kernel Hackers Manual October 2009 usb_interface_id 9 2.6.32-rc5 usb_interface_id allocate an unused interface ID int usb_interface_id struct usb_configuration * config struct usb_function * function config configuration associated with the interface function function handling the interface single threaded during gadget setup usb_interface_id is called from usb_function.bind callbacks to allocate new interface IDs. The function driver will then store that ID in interface, association, CDC union, and other descriptors. It will also handle any control requests targetted at that interface, particularly changing its altsetting via set_alt. There may also be class-specific or vendor-specific requests to handle. All interface identifier should be allocated using this routine, to ensure that for example different functions don't wrongly assign different meanings to the same identifier. Note that since interface identifers are configuration-specific, functions used in more than one configuration (or more than once in a given configuration) need multiple versions of the relevant descriptors. Returns the interface ID which was allocated; or -ENODEV if no more interface IDs can be allocated. Kernel Hackers Manual October 2009 usb_add_config 9 2.6.32-rc5 usb_add_config add a configuration to a device. int usb_add_config struct usb_composite_dev * cdev struct usb_configuration * config cdev wraps the USB gadget config the configuration, with bConfigurationValue assigned single threaded during gadget setup One of the main tasks of a composite driver's bind routine is to add each of the configurations it supports, using this routine. This function returns the value of the configuration's bind, which is zero for success else a negative errno value. Binding configurations assigns global resources including string IDs, and per-configuration resources such as interface IDs and endpoints. Kernel Hackers Manual October 2009 usb_string_id 9 2.6.32-rc5 usb_string_id allocate an unused string ID int usb_string_id struct usb_composite_dev * cdev cdev the device whose string descriptor IDs are being allocated single threaded during gadget setup usb_string_id() is called from bind callbacks to allocate string IDs. Drivers for functions, configurations, or gadgets will then store that ID in the appropriate descriptors and string table. All string identifier should be allocated using this routine, to ensure that for example different functions don't wrongly assign different meanings to the same identifier. Kernel Hackers Manual October 2009 usb_composite_register 9 2.6.32-rc5 usb_composite_register register a composite driver int usb_composite_register struct usb_composite_driver * driver driver the driver to register single threaded during gadget setup This function is used to register drivers using the composite driver framework. The return value is zero, or a negative errno value. Those values normally come from the driver's bind method, which does all the work of setting up the driver to match the hardware. On successful return, the gadget is ready to respond to requests from the host, unless one of its components invokes usb_gadget_disconnect while it was binding. That would usually be done in order to wait for some userspace participation. Kernel Hackers Manual October 2009 usb_composite_unregister 9 2.6.32-rc5 usb_composite_unregister unregister a composite driver void __exit usb_composite_unregister struct usb_composite_driver * driver driver the driver to unregister This function is used to unregister drivers using the composite driver framework. At this writing, a few of the current gadget drivers have been converted to this framework. Near-term plans include converting all of them, except for "gadgetfs". Kernel Hackers Manual October 2009 acm_cdc_notify 9 2.6.32-rc5 acm_cdc_notify issue CDC notification to host int acm_cdc_notify struct f_acm * acm u8 type u16 value void * data unsigned length acm wraps host to be notified type notification type value Refer to cdc specs, wValue field. data data to be sent length size of data irqs blocked, acm->lock held, acm_notify_req non-null Returns zero on sucess or a negative errno. See section 6.3.5 of the CDC 1.1 specification for information SerialState change. Kernel Hackers Manual October 2009 acm_bind_config 9 2.6.32-rc5 acm_bind_config add a CDC ACM function to a configuration int acm_bind_config struct usb_configuration * c u8 port_num c the configuration to support the CDC ACM instance port_num /dev/ttyGS* port this interface will use single threaded during gadget setup Returns zero on success, else negative errno. Caller must have called gserial_setup() with enough ports to handle all the ones it binds. Caller is also responsible for calling gserial_cleanup() before module unload. Kernel Hackers Manual October 2009 ecm_bind_config 9 2.6.32-rc5 ecm_bind_config add CDC Ethernet network link to a configuration int ecm_bind_config struct usb_configuration * c u8 ethaddr[ETH_ALEN] c the configuration to support the network link ethaddr[ETH_ALEN] a buffer in which the ethernet address of the host side side of the link was recorded single threaded during gadget setup Returns zero on success, else negative errno. Caller must have called gether_setup(). Caller is also responsible for calling gether_cleanup() before module unload. Kernel Hackers Manual October 2009 geth_bind_config 9 2.6.32-rc5 geth_bind_config add CDC Subset network link to a configuration int geth_bind_config struct usb_configuration * c u8 ethaddr[ETH_ALEN] c the configuration to support the network link ethaddr[ETH_ALEN] a buffer in which the ethernet address of the host side side of the link was recorded single threaded during gadget setup Returns zero on success, else negative errno. Caller must have called gether_setup(). Caller is also responsible for calling gether_cleanup() before module unload. Kernel Hackers Manual October 2009 obex_bind_config 9 2.6.32-rc5 obex_bind_config add a CDC OBEX function to a configuration int obex_bind_config struct usb_configuration * c u8 port_num c the configuration to support the CDC OBEX instance port_num /dev/ttyGS* port this interface will use single threaded during gadget setup Returns zero on success, else negative errno. Caller must have called gserial_setup() with enough ports to handle all the ones it binds. Caller is also responsible for calling gserial_cleanup() before module unload. Kernel Hackers Manual October 2009 gser_bind_config 9 2.6.32-rc5 gser_bind_config add a generic serial function to a configuration int gser_bind_config struct usb_configuration * c u8 port_num c the configuration to support the serial instance port_num /dev/ttyGS* port this interface will use single threaded during gadget setup Returns zero on success, else negative errno. Caller must have called gserial_setup() with enough ports to handle all the ones it binds. Caller is also responsible for calling gserial_cleanup() before module unload. The first hardware supporting this API was the NetChip 2280 controller, which supports USB 2.0 high speed and is based on PCI. This is the net2280 driver module. The driver supports Linux kernel versions 2.4 and 2.6; contact NetChip Technologies for development boards and product information. Other hardware working in the "gadget" framework includes: Intel's PXA 25x and IXP42x series processors (pxa2xx_udc), Toshiba TC86c001 "Goku-S" (goku_udc), Renesas SH7705/7727 (sh_udc), MediaQ 11xx (mq11xx_udc), Hynix HMS30C7202 (h7202_udc), National 9303/4 (n9604_udc), Texas Instruments OMAP (omap_udc), Sharp LH7A40x (lh7a40x_udc), and more. Most of those are full speed controllers. At this writing, there are people at work on drivers in this framework for several other USB device controllers, with plans to make many of them be widely available. A partial USB simulator, the dummy_hcd driver, is available. It can act like a net2280, a pxa25x, or an sa11x0 in terms of available endpoints and device speeds; and it simulates control, bulk, and to some extent interrupt transfers. That lets you develop some parts of a gadget driver on a normal PC, without any special hardware, and perhaps with the assistance of tools such as GDB running with User Mode Linux. At least one person has expressed interest in adapting that approach, hooking it up to a simulator for a microcontroller. Such simulators can help debug subsystems where the runtime hardware is unfriendly to software development, or is not yet available. Support for other controllers is expected to be developed and contributed over time, as this driver framework evolves. In addition to Gadget Zero (used primarily for testing and development with drivers for usb controller hardware), other gadget drivers exist. There's an ethernet gadget driver, which implements one of the most useful Communications Device Class (CDC) models. One of the standards for cable modem interoperability even specifies the use of this ethernet model as one of two mandatory options. Gadgets using this code look to a USB host as if they're an Ethernet adapter. It provides access to a network where the gadget's CPU is one host, which could easily be bridging, routing, or firewalling access to other networks. Since some hardware can't fully implement the CDC Ethernet requirements, this driver also implements a "good parts only" subset of CDC Ethernet. (That subset doesn't advertise itself as CDC Ethernet, to avoid creating problems.) Support for Microsoft's RNDIS protocol has been contributed by Pengutronix and Auerswald GmbH. This is like CDC Ethernet, but it runs on more slightly USB hardware (but less than the CDC subset). However, its main claim to fame is being able to connect directly to recent versions of Windows, using drivers that Microsoft bundles and supports, making it much simpler to network with Windows. There is also support for user mode gadget drivers, using gadgetfs. This provides a User Mode API that presents each endpoint as a single file descriptor. I/O is done using normal read() and read() calls. Familiar tools like GDB and pthreads can be used to develop and debug user mode drivers, so that once a robust controller driver is available many applications for it won't require new kernel mode software. Linux 2.6 Async I/O (AIO) support is available, so that user mode software can stream data with only slightly more overhead than a kernel driver. There's a USB Mass Storage class driver, which provides a different solution for interoperability with systems such as MS-Windows and MacOS. That File-backed Storage driver uses a file or block device as backing store for a drive, like the loop driver. The USB host uses the BBB, CB, or CBI versions of the mass storage class specification, using transparent SCSI commands to access the data from the backing store. There's a "serial line" driver, useful for TTY style operation over USB. The latest version of that driver supports CDC ACM style operation, like a USB modem, and so on most hardware it can interoperate easily with MS-Windows. One interesting use of that driver is in boot firmware (like a BIOS), which can sometimes use that model with very small systems without real serial lines. Support for other kinds of gadget is expected to be developed and contributed over time, as this driver framework evolves. USB OTG support on Linux 2.6 was initially developed by Texas Instruments for OMAP 16xx and 17xx series processors. Other OTG systems should work in similar ways, but the hardware level details could be very different. Systems need specialized hardware support to implement OTG, notably including a special Mini-AB jack and associated transciever to support Dual-Role operation: they can act either as a host, using the standard Linux-USB host side driver stack, or as a peripheral, using this "gadget" framework. To do that, the system software relies on small additions to those programming interfaces, and on a new internal component (here called an "OTG Controller") affecting which driver stack connects to the OTG port. In each role, the system can re-use the existing pool of hardware-neutral drivers, layered on top of the controller driver interfaces (usb_bus or usb_gadget). Such drivers need at most minor changes, and most of the calls added to support OTG can also benefit non-OTG products. Gadget drivers test the is_otg flag, and use it to determine whether or not to include an OTG descriptor in each of their configurations. Gadget drivers may need changes to support the two new OTG protocols, exposed in new gadget attributes such as b_hnp_enable flag. HNP support should be reported through a user interface (two LEDs could suffice), and is triggered in some cases when the host suspends the peripheral. SRP support can be user-initiated just like remote wakeup, probably by pressing the same button. On the host side, USB device drivers need to be taught to trigger HNP at appropriate moments, using usb_suspend_device(). That also conserves battery power, which is useful even for non-OTG configurations. Also on the host side, a driver must support the OTG "Targeted Peripheral List". That's just a whitelist, used to reject peripherals not supported with a given Linux OTG host. This whitelist is product-specific; each product must modify otg_whitelist.h to match its interoperability specification. Non-OTG Linux hosts, like PCs and workstations, normally have some solution for adding drivers, so that peripherals that aren't recognized can eventually be supported. That approach is unreasonable for consumer products that may never have their firmware upgraded, and where it's usually unrealistic to expect traditional PC/workstation/server kinds of support model to work. For example, it's often impractical to change device firmware once the product has been distributed, so driver bugs can't normally be fixed if they're found after shipment. Additional changes are needed below those hardware-neutral usb_bus and usb_gadget driver interfaces; those aren't discussed here in any detail. Those affect the hardware-specific code for each USB Host or Peripheral controller, and how the HCD initializes (since OTG can be active only on a single port). They also involve what may be called an OTG Controller Driver, managing the OTG transceiver and the OTG state machine logic as well as much of the root hub behavior for the OTG port. The OTG controller driver needs to activate and deactivate USB controllers depending on the relevant device role. Some related changes were needed inside usbcore, so that it can identify OTG-capable devices and respond appropriately to HNP or SRP protocols.